Maintenance Objectives

F

Frank Cardillo

#1
I am trying to document "Maintenance Objectives". Can anyone give me a couple of examples?

------------------
 
Elsmar Forum Sponsor
R

Roger Eastin

#2
Examples might be: Increasing critical equipment uptime by 20% by implementing a new preventive maintenance system and by, using analysis of perishable tooling data, optimizing changeouts of perishable tooling; increasing equipment Cpk's by improving the timing of doing maintenance for tool wear; optimizing maintenance scheduling by tying the schedule to actual improvements (downtime, equipment capacity, quality,etc)to equipment. Your objectives could include, depending on where you are at with QS implementation, writing procedures as indicated in 4.9.g.1. For indicators and strategies, it would be useful to review some articles/books on TPM. There are a couple of threads that deal with this in this forum.
 
Thread starter Similar threads Forum Replies Date
Q TS16949 Maintenance Objectives and Machine Downtime IATF 16949 - Automotive Quality Systems Standard 3
J Maintenance Objectives - Any suggestions? IATF 16949 - Automotive Quality Systems Standard 5
1 Maintenance Objectives - Plastic and Silicone Injection Molder IATF 16949 - Automotive Quality Systems Standard 4
J QSW-9000 4.9.g.1 - Maintenance objectives QS-9000 - American Automotive Manufacturers Standard 2
E Software maintenance Process Software maintenance Process to IEC 6204? IEC 62304 - Medical Device Software Life Cycle Processes 3
D Preventive Maintenance vs. General Cleaning ISO 13485:2016 - Medical Device Quality Management Systems 2
J Help settle a disagreement: Should external providers of preventive maintenance be on your ASL? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
F Component maintenance qualification - Regulation (EU) No 1321/2014 Article 5 EASA and JAA Aviation Standards and Requirements 6
K Generic preventive maintenance form wanted Document Control Systems, Procedures, Forms and Templates 2
S Quality management system (Well head installation & maintenance) Quality Management System (QMS) Manuals 5
T ISO 17025:2017 requirement 5.7.b. about maintenance the integrity of the management system ISO 17025 related Discussions 1
A Feedback of typical maintenance problems with LMI digital probes Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
S Are there ISO9001:2015 Requirements for Preventive Maintenance? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 36
Q Software SOP - Use and maintenance of an ERP system Software Quality Assurance 6
R Robotic weld cell - maintenance issues - expertise needed Manufacturing and Related Processes 0
J Requirements for Layered Process Audits including Maintenance, Shipping, Receiving IATF 16949 - Automotive Quality Systems Standard 4
D Preventive Maintenance Implementation 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
D Preventative Maintenance for Gages, handtools etc Other Medical Device Regulations World-Wide 1
C Determining if Maintenance Contractor is an External Service subject to ISO 9001 Clause 8.4 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 43
C Maintenance of Product Technical Documentation EU Medical Device Regulations 3
R IATF 16949 Clause 8.5.1.6 a) maintenance and repair facilities - Production tooling management and personnel IATF 16949 - Automotive Quality Systems Standard 4
qualprod Best criteria to measure Corrective Action effectiveness - Poor Maintenance ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
M Minitab tool to evaluate PM (Preventive Maintenance) process Using Minitab Software 6
B Total Productive Maintenance - Company Transport IATF 16949 - Automotive Quality Systems Standard 2
P Minor Non-Conformance - Maintenance Records Not Fully Completed ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 24
L 21CRF820.70(g)(2) Maintenance Inspection Interval 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
I Tool maintenance and calibration procedure - Calibrating tools/equipment AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
K IATF16949 8.5.1.5 Total Productive Maintenance IATF 16949 - Automotive Quality Systems Standard 9
J FAA Maintenance Requirements - DER Repair to a PMA Part Federal Aviation Administration (FAA) Standards and Requirements 1
K Maintenance requirements for Production Equipment in AS9100D General Auditing Discussions 8
T Part 145 Maintenance Station S/N ESN Character Requirements EASA and JAA Aviation Standards and Requirements 3
M Preventive Maintenance Spreadsheet in Excel Quality Assurance and Compliance Software Tools and Solutions 2
B IATF 16949 Section 8.5.1.5 (Total Productive Maintenance) IATF 16949 - Automotive Quality Systems Standard 19
D Does AS9100 certified OEM need AS9110 if no maintenance is provided? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
N Laboratory Audit Nonconformance - Maintenance of Standards ISO 17025 related Discussions 10
A Technical File Maintenance - Old generation product EU Medical Device Regulations 4
L Seeking help in Basic Maintenance Knowledge Manufacturing and Related Processes 4
M CAPA due to Consumer not following Maintenance Instructions... Nonconformance and Corrective Action 9
S Preparing a Turtle Diagram for Maintenance Department Misc. Quality Assurance and Business Systems Related Topics 2
U Relating maintenance to product quality Manufacturing and Related Processes 5
S ISO 9001 Audit requirement for maintenance department ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
C Service and maintenance in an initial importer facility USA 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
M Total Productive Maintenance vs. Lean, Six sigma, Business Process Reengineering, etc Quality Tools, Improvement and Analysis 9
A Electronic Maintenance Records stored in a machine ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
A How to create a Maintenance procedure based on TS 16949 Requirements IATF 16949 - Automotive Quality Systems Standard 5
N ISO 9001 Quality Manual for an O&M (Operations and Maintenance) Company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 14
S Predictive Maintenance Format / Example Misc. Quality Assurance and Business Systems Related Topics 4
T Are Customers required to follow a Manufacturers Maintenance Schedule? ISO 13485:2016 - Medical Device Quality Management Systems 3
E Manufacturer Responsibility (vs. User/Customer) for Preventive Maintenance/Repair 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
A Technical Files/Dossier/STED File Maintenance for Notified Body Audiits Other Medical Device Regulations World-Wide 2

Similar threads

Top Bottom