Manufacturing Process Design Documentation - Inputs and Outputs

M

meeeeedo

#1
Dear Messrs,

I have a big confusion about the documentation of Manufacturing Process Design.
Is it required to put all inputs and outputs in a one file named " manufacturing process design " or make a process flow chart refer to these inputs / outputs or make a procedure describe this process ????!!!!
Realy, I want to know how to fulfill this clause of ISO/TS standard , and how the auditor will ask about that ????

Best regards
 
Elsmar Forum Sponsor

Jim Wynne

Staff member
Admin
#3
Dear Messrs,

I have a big confusion about the documentation of Manufacturing Process Design.
Is it required to put all inputs and outputs in a one file named " manufacturing process design " or make a process flow chart refer to these inputs / outputs or make a procedure describe this process ????!!!!
Realy, I want to know how to fulfill this clause of ISO/TS standard , and how the auditor will ask about that ????

Best regards
You should do it in a way that makes sense, and shows what's expected to go on when manufacturing processes are designed. The output part is simple--it's an efficacious manufacturing process. You can do this with a flowchart, a written document, or both if that's what works best. It's best to start by writing down the process elements in the order that they should occur, and then for each step determine the necessary inputs. For example, if the process involves new machinery, there would most likely be inputs from purchasing, machine suppliers, and perhaps your own personnel who'll be responsible for setting up the machine(s). If additional personnel will be required, there might be inputs from your human resources department, and if you have a training department, they might be involved as well. Once you have all of your information you can decide the best method of documenting it.
 
Thread starter Similar threads Forum Replies Date
C IATF 16949 8.3 Exclusion - Manufacturing process design and development IATF 16949 - Automotive Quality Systems Standard 5
M IATF 16949 Cl. 8.3 - Manufacturing process design and development IATF 16949 - Automotive Quality Systems Standard 1
M IATF 16949 - Cl. 8.3.3 - Product design inputs, manufacturing process design inputs IATF 16949 - Automotive Quality Systems Standard 4
L IATF 16949 Cl. 8.3.3.2 Manufacturing process design input - Process capability IATF 16949 - Automotive Quality Systems Standard 1
O PFMEA - Reducing Severity (S) Ranking - Manufacturing Process Design Changes FMEA and Control Plans 4
A ISO/TS 16949 - 7.3.3.2 Manufacturing Process Design Output IATF 16949 - Automotive Quality Systems Standard 6
kedarg6500 Manufacturing Process Design and Development Review ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
S TS 16949 7.3.3.2 Question - Manufacturing Process Design Output. IATF 16949 - Automotive Quality Systems Standard 8
M Manufacturing Process Design and Development Review - TS 16949 Clause 7.3.4 IATF 16949 - Automotive Quality Systems Standard 12
R Use of Design and Process FMEA tools - Kitchen Cabinets Manufacturing Quality Tools, Improvement and Analysis 6
Q How to Demonstrate Manufacturing Process Design Conformity - Capability IATF 16949 - Automotive Quality Systems Standard 6
A Manufacturing Process Design Output Data for Quality, Reliability, Maintainability Design and Development of Products and Processes 1
A Manufacturing Process Design Output - Method of rapid NC detection & feedback Design and Development of Products and Processes 2
P Evidence for manufacturing process design output data Design and Development of Products and Processes 3
A Manufacturing process design validation - What aspects are validated? Design and Development of Products and Processes 3
A Manufacturing process design input vs Design information checklist Design and Development of Products and Processes 1
S Manufacturing process design inputs - Productivity, process capability, cost targets Design and Development of Products and Processes 2
R Processes in Design & Development - Have you Defined Manufacturing Process Designs? Design and Development of Products and Processes 11
R Product Design vs. Manufacturing Process Design Design and Development of Products and Processes 8
S Manufacturing Process FDA FOIA Medical Device and FDA Regulations and Standards News 3
S Manufacturing Process FDA FOIA US Food and Drug Administration (FDA) 4
Z Rapid audit template for plastic parts manufacturing process Manufacturing and Related Processes 12
P Managing How PPAP Requirements are Communicated in the Manufacturing Process and to Suppliers APQP and PPAP 5
L Manufacturing Process Audit Help IATF 16949 - Automotive Quality Systems Standard 6
M Description of the requirements of clause 9.2.2.3 manufacturing process audit- needs your feedback IATF 16949 - Automotive Quality Systems Standard 0
Watchcat Does 820.30 include the manufacturing process? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
Watchcat Does ISO 13485 7.3 include the manufacturing process? ISO 13485:2016 - Medical Device Quality Management Systems 14
K Differences between Manufacturing Process Audit & Layered Process Audit Lean in Manufacturing and Service Industries 4
G QMS requirements for legal manufacturer when outsourcing manufacturing process Other Medical Device Regulations World-Wide 25
J Manufacturing Process Auditor Requirements - IATF 16949 IATF 16949 - Automotive Quality Systems Standard 9
I ISO 10993 Biocompatibility Requirements - manufacturing process chemicals Other Medical Device Related Standards 8
S Improving Quality inspection gate in one piece flow manufacturing process Manufacturing and Related Processes 0
H IATF 16949 9.2.2.3 - Manufacturing process audits IATF 16949 - Automotive Quality Systems Standard 11
M Requirement for manufacturing process validation in IATF 16949 IATF 16949 - Automotive Quality Systems Standard 8
J Lean MFG (manufacturing) process and Work order templates Lean in Manufacturing and Service Industries 6
A Is a Manufacturing Process Sheet required for each Component? Manufacturing and Related Processes 4
V IATF 16949 Manufacturing Process & Product Audits IATF 16949 - Automotive Quality Systems Standard 1
S Manufacturing Work Instruction examples that include process pictures Manufacturing and Related Processes 3
A IATF 16949 Cl. 8.3.5.2 e) - Manufacturing Process Flow Charts & Layout IATF 16949 - Automotive Quality Systems Standard 5
C Manufacturing Process Work Instructions - Format Manufacturing and Related Processes 4
B Process Risk Assessment Example for a Manufacturing Company Quality Tools, Improvement and Analysis 2
I Manufacturing build requests - process and form Other Medical Device Regulations World-Wide 4
Crimpshrine13 Is VDA 6.3 required for Manufacturing Process Audit (ISO/TS 16949)? Manufacturing and Related Processes 5
L Most appropriate Auditor to check the FMEA & PCP of a Manufacturing Process IATF 16949 - Automotive Quality Systems Standard 5
M Manufacturing Process Validation Destructive Testing Sampling Plan Advice Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
A SOP for Marketing Process for a Medical Devices Manufacturing Company wanted ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
J Process FMEA w/ Contracted Manufacturing ISO 14971 - Medical Device Risk Management 2
D Number of Manufacturing Lots for Process Validation Manufacturing and Related Processes 10
Q Medical Device Manufacturing Process Monitoring Best Practice ISO 13485:2016 - Medical Device Quality Management Systems 2
J What is Incorporation in Assembly/Manufacturing Process in FMEA? FMEA and Control Plans 4

Similar threads

Top Bottom