Material allowed in the ASQ CQPA (Certified Quality Process Analyst) Exam

R

reddy3232

#1
I have my CQPA examination this week. What kind of material is suggested to carry for the examination?
Quality Process Analyst Handbook (2nd edition), QCI CQPA primer are the materials which i am using for preparation.

Any suggestions would be greatly helpful.

Thank You.
 
Elsmar Forum Sponsor

howste

Thaumaturge
Trusted Information Resource
#2
I have my CQPA examination this week. What kind of material is suggested to carry for the examination?
Quality Process Analyst Handbook (2nd edition), QCI CQPA primer are the materials which i am using for preparation.

Any suggestions would be greatly helpful.

Thank You.
Stick with the two that you have. I wouldn't bring any books into the exam that you aren't already familiar with. If you can't find the information in a book that you're already familiar with then it will definitely take too long to find the information in a book you don't know. I've taken 3 exams (CQE, CQA, CQM/OE) and I never had extra time.

During the 15 years I proctored ASQ exams I sometimes saw people bring boxes of books into exams, but they only looked at one or two.
 
Thread starter Similar threads Forum Replies Date
R ASQ reference material clarification - Spiral bound materials allowed in ASQ Exam? Professional Certifications and Degrees 1
S What Reference Material is allowed in the ASQ CQA Exam ? Professional Certifications and Degrees 1
Q Full Material Disclosure and IPC-1752A RoHS, REACH, ELV, IMDS and Restricted Substances 0
K Critical Material Vendors: Distributors Vs Manufacturers and Supply Agreements ISO 13485:2016 - Medical Device Quality Management Systems 1
G Any training material on the 1-10-100 rule? Training - Internal, External, Online and Distance Learning 4
P AS9100 and Raw Material Traceability AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
M ASQ certification study material Professional Certifications and Degrees 1
H IEC 61010-1 Clause No. 10.5 Resistance to Heat - Sub Clause 10.5.3 Insulating Material CE Marking (Conformité Européene) / CB Scheme 6
M Biocompatible material ISO 13485:2016 - Medical Device Quality Management Systems 3
H Pre-production units & Purchasing/Supplier/Material controls ISO 13485:2016 - Medical Device Quality Management Systems 6
T Testing for proving food safety on USP class vi material RoHS, REACH, ELV, IMDS and Restricted Substances 0
Q SUS Material Manufacturing and Related Processes 0
R Finding Equivalent Material Information Manufacturing and Related Processes 1
W Nonconforming-Material Process Nonconformance and Corrective Action 1
Stoic Details of Operational Qualification (OQ) test design for plastic extrusion processes, effect of material property noise, and GHTF/SG3/N99-10 US Medical Device Regulations 2
T Control of Nonconforming Material AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 14
DuncanGibbons Safe-Life, Fail-Safe and Damage Tolerant approaches and their relevant material property requirements Federal Aviation Administration (FAA) Standards and Requirements 0
T Shrinkage Testing for EPDM Material Various Other Specifications, Standards, and related Requirements 5
M Preparing a document for Raw Material of Medical Device EU Medical Device Regulations 1
J ISO 13485- 8.3.1 Non-conforming material high volume ISO 13485:2016 - Medical Device Quality Management Systems 4
Awais Taking Pictures of Outbound Material - In the Manufacturing Shop floor Manufacturing and Related Processes 5
Q G11 material Manufacturing and Related Processes 7
M Medical Device Marketing Material - Control of Social Media 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
M Origin of Material Review Board AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
D Raw Material Expirations Manufacturing and Related Processes 2
W What is okay to use as a reference material for ISO 17025? ISO 17025 related Discussions 4
J Scrap Material Scale Calibration Required? IATF 16949 - Automotive Quality Systems Standard 21
R Revalidation under VDmax25 following material change ISO 13485:2016 - Medical Device Quality Management Systems 2
J Example of a defined procedure for carrying out Material Review Board (MRB) Manufacturing and Related Processes 0
S Advice on how to reduce overhead of handling non-conforming material Nonconformance and Corrective Action 7
R AS9102 FAI Change in Material / Process Supplier AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
S Predicate Material 510(k) US Food and Drug Administration (FDA) 1
S Predicate Material 510(k) Medical Device and FDA Regulations and Standards News 3
lanley liao Who can share these material with me ? Training - Internal, External, Online and Distance Learning 1
E Record Retention - Raw Material (Steel Certs) Records and Data - Quality, Legal and Other Evidence 3
M Documents to be included in 1.3 Material check in PPA report APQP and PPAP 4
rerusk1 MRB (Material Review Board) Process using MS Sharepoint or MS Teams Manufacturing and Related Processes 2
M Material incoming to the production process reflected in PFMEA FMEA and Control Plans 9
R Do we need issue ECN (Engineering Change Notice) towards updated Material Specification? Design and Development of Products and Processes 2
Q Change the shape of the raw material FAI AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
S Regrind Material in Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 1
Anonymous16-2 Dietary Supplement Raw Material/Component Storage and Production Manufacturing and Related Processes 1
H Expired packaging material - Expired unused Tyvek pouches Other Medical Device and Orthopedic Related Topics 2
A Design History File - Not ready to share the design drawings or Bill of Material US Food and Drug Administration (FDA) 2
D Class 3 Device - Change of supplier of material Canada Medical Device Regulations 6
D List A IVD - Change to material supplier EU Medical Device Regulations 3
Skooma Deburring and Tolerances - Is there a Standard for deburring or removing material? Manufacturing and Related Processes 3
D Can PFMEA be used in disposition of NC material? ISO 14971 - Medical Device Risk Management 4
DuncanGibbons Manufacturing Plan vs Material Specification vs Control Plan Manufacturing and Related Processes 5
Jane's Like-for-like critical raw material change qualification - type of testing/ number of lots required ISO 13485:2016 - Medical Device Quality Management Systems 4

Similar threads

Top Bottom