Material Traceability - Mill certification not available

D

DGARRISON

#1
#1
IS IT ACCEPTABLE TO REESTABLISH POINT OF ORIGIN FOR RAW MATERIAL DISTRIBUTORS WHEN MILL CERTIFICATION IS UNOBTAINABLE? CHEMICAL AND PHYSICAL TEST ARE PERFORMED BY AN ACCREDITED LAB (A2LA CERTIFIED).
WHERE DOES PRODUCT LIABILITY FALL? ARE YOU ACCEPTING RESPONSIBILITY?
 
12 questions to ask before buying a QMS
Elsmar Forum Sponsor
J

Jim Biz

#2
#2
What you have described I would think is nothing more that verification of the materials on-hand.

Should have not much to do with "re-establishing an origion point"

The point of origion remains the same even if the certificatons are not available.

As far as "liability" I'm not a lawyer but I would think you have just as much liability either way --- if you have certs from a supplier or if you have independent test records you do have "Proof of material make-up".

Regards
Jim

[This message has been edited by Jim Biz (edited 13 April 2001).]
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
P Medical Device Raw Material Traceability Requirements Other Medical Device and Orthopedic Related Topics 6
R CRM (Certificate of Reference Material) but no Traceability Manufacturing and Related Processes 6
N Managing Subcontracting Process - Material Traceability from Warehouse to Processing ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
D Relying on Supplier Records for Material Traceability - Bar stock and forgings ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
J Identification and (material) traceability - Intent of the Standard? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
H Intelligent Part Numbering Schema for Part/Material Traceability Manufacturing and Related Processes 4
T Part to Material Traceability - Parts for Production Runs ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
O Identifying Raw Material Part Numbers - Product Identification and Traceability ISO 13485:2016 - Medical Device Quality Management Systems 6
A In Process Traceability - Raw Material to Ship QS-9000 - American Automotive Manufacturers Standard 1
R Do we need issue ECN (Engineering Change Notice) towards updated Material Specification? Design and Development of Products and Processes 2
Q Change the shape of the raw material FAI AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
S Regrind Material in Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 1
Anonymous16-2 Dietary Supplement Raw Material/Component Storage and Production Manufacturing and Related Processes 1
H Expired packaging material - Expired unused Tyvek pouches Other Medical Device and Orthopedic Related Topics 2
A Design History File - Not ready to share the design drawings or Bill of Material US Food and Drug Administration (FDA) 2
D Class 3 Device - Change of supplier of material Canada Medical Device Regulations 6
D List A IVD - Change to material supplier EU Medical Device Regulations 3
Skooma Deburring and Tolerances - Is there a Standard for deburring or removing material? Manufacturing and Related Processes 3
D Can PFMEA be used in disposition of NC material? ISO 14971 - Medical Device Risk Management 4
DuncanGibbons Manufacturing Plan vs Material Specification vs Control Plan Manufacturing and Related Processes 5
Jane's Like-for-like critical raw material change qualification - type of testing/ number of lots required ISO 13485:2016 - Medical Device Quality Management Systems 4
L AS5553 Clause 3.1.7 e "Control packaging material ..................reused" AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
J Raw material certificates - CC - Safety products - Sheet metal stamping IATF 16949 - Automotive Quality Systems Standard 1
C Manufacturing overages & nonconforming material documentation ISO 13485:2016 - Medical Device Quality Management Systems 3
M Changing supplier of critical raw material (III class device) Other Medical Device and Orthopedic Related Topics 1
I Where can I beg, steal (just kidding of course) or borrow good training material on the ISO 9001:2015 standard? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
DMLqms Material for laboratory use or Medical Device? EU Medical Device Regulations 2
C Material from outside CER evaluation period CE Marking (Conformité Européene) / CB Scheme 8
F AS9100D, raw material standards are a requirement for manufacturing? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
6 Management of SDS and Hazardous Material Occupational Health & Safety Management Standards 2
L ASQ CBA biomedical auditor - CBA primer material is enough to study? ISO 13485:2016 - Medical Device Quality Management Systems 6
DuncanGibbons Are there any aerospace specific requirements for material resource planning? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
T Was Just told we could ONLY buy material for AS9100 customers if the DISTRIBUTION house is AS9100 / AS9120 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
C Clean room injection molding, raw material mixing requirements ISO 13485:2016 - Medical Device Quality Management Systems 2
C Raw material Mixing / Preparation for clean room class C injection molding Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
P GM TWO (Temporary Work Order) - Is there a specific GM format for the TWO# to be sent with the material? IATF 16949 - Automotive Quality Systems Standard 1
R ASQ reference material clarification - Spiral bound materials allowed in ASQ Exam? Professional Certifications and Degrees 1
Manix Supplied Steel Material Testing Norms and Requirements Supplier Quality Assurance and other Supplier Issues 1
R Material safety data sheet (MSDS) related clause in IATF 16949 manual IATF 16949 - Automotive Quality Systems Standard 17
K Interpretation of significant change - material change Canada Medical Device Regulations 3
M Raw stock material testing discrepancy using an XRF (x-ray fluorescence) analyzer Manufacturing and Related Processes 7
W Scope of MRB (Material Review Board) Responsibilities Misc. Quality Assurance and Business Systems Related Topics 5
M Conformal Coating & AS9102 - Is conformal coating material a COTS part AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
M Maximum Height for the stored material or stock materials Occupational Health & Safety Management Standards 1
F Mig Welded Components - IMDS International Material Data System RoHS, REACH, ELV, IMDS and Restricted Substances 1
K ISO 9001 Requirements for Raw Material Supplier Assessment and Approval ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
R Customer supplied material - risk and policy advice needed Quality Manager and Management Related Issues 11
P Material selection - How do we select a raw material? Bolt made of SAE J994 grade 2 Customer and Company Specific Requirements 3
Q Does our material suppliers’ supplier have to be at least ISO 9001 certified? IATF 16949 - Automotive Quality Systems Standard 3
N PPAP material certificate date IATF 16949 - Automotive Quality Systems Standard 4

Similar threads

Top Bottom