Measurement & Test - What is the definition of devices? Measuring equipment is clear.

Karichan

Starting to get Involved
#1
Hi all

I think no doubt to say internal audit is one of the method for monitoring and measurement.

Measuring equipment is clear. What is the defination of devices? is it only the physical thing? Can internal audit be one of the monitoring and measuring devices? and how about survey questionaire.

Regards
 
Elsmar Forum Sponsor

Hershal

Metrologist-Auditor
Staff member
Super Moderator
#2
Generally, if the discussion is hardware related, then device is typically a thing.

I have not seen the use of device to describe an internal audit or other similar monitoring mechanism, but it may be equally valid for some organizations.

I do recommend that if you also have hardware, that you establish some reasonable definition so that everyone in the organization knows what is meant when the term is used.

Hershal
 
Thread starter Similar threads Forum Replies Date
S Requirements for Interval Measurement test & Frequency Response test clarification IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
I Labeling measurement and test equipment General Measurement Device and Calibration Topics 4
E GR&R for a test fixture that outputs variable data per measurement Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
W Gage R&R where Device Under Test (DUT) is part of the Measurement System Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
C Flatness Measurement Errors from a Datum - Test Method General Measurement Device and Calibration Topics 3
C How to perform Gauge R & R on Automated Test & Measurement Equipment Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
B M&TE (Measurement and Test Equipment) Usage Records (Logs) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
T MSA (Measurement System Analysis) Competency Test Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
S Measurement Uncertainty for Neutral Salt Spray test to BS EN ISO 9227:2006 General Measurement Device and Calibration Topics 4
K AATCC 81 pH test - How to calculate MU (Measurement Uncertainty) Measurement Uncertainty (MU) 2
T Calibration of Rental Electronic Measurement and Test Equipment General Measurement Device and Calibration Topics 3
S How to define Permissible Error for Measurement and Test Equipment? Measurement Uncertainty (MU) 3
M Disposal of Calibrated Measurement and Test Equipment General Measurement Device and Calibration Topics 18
L Measurement System Assessment (MSA) - Water Crackle Test General Measurement Device and Calibration Topics 2
T 4:1 Test Accuracy Ratio (TAR) or Stated Measurement Uncertainty (MU) General Measurement Device and Calibration Topics 21
G Tester Measurement Variability - How perform an MSA on a Test Machine Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
J Sources of Potential Measurement Variation for Brinell Hardness Test Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S TUR (test uncertainty ratio) based on Standard or Expanded Measurement Uncertainty? Measurement Uncertainty (MU) 2
N Calibration Frequency of Measurement and Test Devices Calibration Frequency (Interval) 26
A Final Inspection - Calibrated M&TE (Measurement and Test Equipment)? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
B Test Method Qualification - Measurement Capability - What else is involved? Reliability Analysis - Predictions, Testing and Standards 1
B MSA (measurement system analysis) on CCA Automated Test Equipment (ATE) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
M Lever type dial gauge - Usage of a dimensional 'test indicator' for measurement General Measurement Device and Calibration Topics 10
D Regrading Test Blocks: Measurement Uncertainty (MU) Issues? Measurement Uncertainty (MU) 4
M What Measurement, Monitoring and Test Equipment Must Be Calibrated? General Measurement Device and Calibration Topics 20
B Operating Range & Measurement System Discrimination:How to select parts for R&R test? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
M Measurement Risk Management - 4:1 Test Accuracy Ratio Guardband General Measurement Device and Calibration Topics 1
M 4.11 Control of Inspection Measurement and Test Equipment Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
M Measurement Uncertainty in Optical Microscopy Measurement Uncertainty (MU) 1
B ISO 6508 and portable hardness measurement instruments General Measurement Device and Calibration Topics 0
C How to Establish the Calibration & Measurement Capability (CMC)? ISO 17025 related Discussions 1
Ron Rompen Measurement of residual magnetism General Measurement Device and Calibration Topics 2
M Surgical angle measurement guide device with an application software Medical Device and FDA Regulations and Standards News 1
M Disabling measurement data during fault conditions IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
J Most versatile measurement device General Measurement Device and Calibration Topics 2
P Surface scratch measurement General Measurement Device and Calibration Topics 1
N Drawing tolerance vs. Measurement device General Measurement Device and Calibration Topics 7
Ron Rompen MSA on automated measurement system - Multiple Step Vision System Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
P Thermo-Hygrometer - Measurement of 10DegC @10%RH ISO 17025 related Discussions 4
hogheavenfarm GDT Flatness measurement question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
K Software Validation for Measurement Tools used in Process Validation ISO 13485:2016 - Medical Device Quality Management Systems 2
K Best Measurement Systems Demos in California? General Measurement Device and Calibration Topics 1
M Measurement Error - How to determine what is acceptable? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
K Process Mapping - Inputs/Outputs/Detail Activities/Control points/Measurement? Process Maps, Process Mapping and Turtle Diagrams 4
B IEC 60601-2-10 - Accuracy of Pulse Parameters - Required Measurement Uncertainty IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
N Program or application for standard time measurement in industry from video surveillance? Human Factors and Ergonomics in Engineering 1
M Defining frequency of measurement tools callibration Calibration and Metrology Software and Hardware 3
T How to “validate/qualify” a new measurement equipment? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
Bev D Verification and Validation of Measurement Systems Misc. Quality Assurance and Business Systems Related Topics 0
F How do you add accuracies for tools with different measurement devices? General Measurement Device and Calibration Topics 1

Similar threads

Top Bottom