# Measuring OEE (Overall Equipment Effectiveness) for each Job, not for Machine

S

#### stephenz

Hi,
We are a extrusion company. Our production run could be a duration of several hours or several weeks. I am trying to measure OEE for each job, not for machine. How do I define and calculated availability?
Thanks.

#### Stijloor

Super Moderator
A Quick Bump!

Can someone help?

Thank you very much!!

#### D Scott G

##### Starting to get Involved
In my experience availability was calculated using a period in time, normally a 24 hour period, or 86400 seconds. My advice would be to calculate your OEE for your run like you were calculating it for a 24 hour period, Availability being the total time of the run.

Scott

Thread starter Similar threads Forum Replies Date
L Determining Coordinate Measuring Machine (CMM) OEE General Measurement Device and Calibration Topics 2
Monitoring devices vs measuring devices IATF 16949 - Automotive Quality Systems Standard 7
Measuring employee awareness Benchmarking 12
Master / Guideline Matrix for measuring equipment Manufacturing and Related Processes 4
Number of decimal places for measuring General Measurement Device and Calibration Topics 3
Measuring the amount of cure and predicting shrinkage in automotive weatherstrips Manufacturing and Related Processes 4
Measuring Corrective Action Effectiveness AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
Gage R&R for inline measuring machine Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
Clause 7.1.5 Monitoring and measuring resources IATF 16949 - Automotive Quality Systems Standard 14
Monitoring and measuring equipment for occupational health and safety purposes Occupational Health & Safety Management Standards 10
Class I Medical Device with measuring function (UK MDR 2002 / MDD) UK Medical Device Regulations 3
Calc uncertainty of angle; by measuring x,y points Measurement Uncertainty (MU) 0
Gage Measuring 15 Parts at a Time Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
ISO 13485 Calibration Requirements- Assess and Record validity Previous measuring results ISO 13485:2016 - Medical Device Quality Management Systems 5
ISO 17025:2017 Clause 6.4 - Measuring Equipment Validity ISO 17025 related Discussions 2
ISO 9001:2015 7.1.5 Monitoring and measuring resources: Application to training providers ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
Density Column setup for Measuring General Purpose ABS General Measurement Device and Calibration Topics 0
Classification of product (measuring or not?) CE Marking (Conformité Européene) / CB Scheme 5
Measuring Radii Measurement Uncertainty (MU) 6
Register of the monitoring and measuring equipment AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
Risk analysis for defective measuring or measuring equipment out of calibration General Measurement Device and Calibration Topics 2
Tools used for measuring (New to metrology) General Measurement Device and Calibration Topics 9
Best way to calc uncert for measuring microscope without duplicating repeatability? Measurement Uncertainty (MU) 2
Calibration cycle for monitoring & measuring tools used in medical device manufacturing General Measurement Device and Calibration Topics 5
Study Type 1 on a CMM using a measuring support Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
Determining a tolerance value for Measuring devices in-house inspection General Measurement Device and Calibration Topics 12
Accurately measuring Full Thread Length Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
ULM Measuring Pressures General Measurement Device and Calibration Topics 1
Missing measuring equipment General Measurement Device and Calibration Topics 6
MMC & LMC modifiers and CMM measuring techniques like diameter least squares and circularity or minimum/ maximum diameter Calibration and Metrology Software and Hardware 5
Measuring Function MEDDEV 2.1/5 relation with MDD 93/42/EEC CE Marking (Conformité Européene) / CB Scheme 2
Measuring FIM (TIR) - Two inside diameters - Conflicting readings between inspectors Manufacturing and Related Processes 1
Measuring thread flank angle on a screw Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
ASTM C1064 Temperature Measuring Device General Measurement Device and Calibration Topics 2
Measuring and monitoring equipment - Understanding which procedures to be compliant with ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 6
ISO 9001:2015 Monitoring and measuring resources. Application a service industry ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
Ammeter calibration - Measuring head (on pic.) problem General Measurement Device and Calibration Topics 1
Monitoring and measuring resources - Example of how section ISO 9001 7.1.5 would apply to a manufacture of software ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
CE mark - Measuring Instruments Directive confusion! CE Marking (Conformité Européene) / CB Scheme 0
Measuring Capability of Process with Multiple Specifications Capability, Accuracy and Stability - Processes, Machines, etc. 6
ISO 13485 7.6 Control of monitoring and measuring equipment - Assess the Validity ISO 13485:2016 - Medical Device Quality Management Systems 4
Measuring fine tubing (< 0.100") "Wall by weight" General Measurement Device and Calibration Topics 11
Posting Measuring Equipment Accuracy for User Information General Measurement Device and Calibration Topics 4
ISO 9001 7.1.5.2 - Actions Taken When Measuring Equipment is Found to be Unfit for Use General Measurement Device and Calibration Topics 13
ISO 9001 and ISO 17025 - Measuring tools not in calibration system General Measurement Device and Calibration Topics 3
S Calibration - Isolated current meter - Measuring patient auxiliary leakage current Calibration and Metrology Software and Hardware 4
Measuring customer parts on a CMM - How many decimals to report to the customer? ISO 17025 related Discussions 28
Complying with ISO 9001:2015 - 9.1.1 b - Monitoring, measuring, analyzing and evaluation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
Measuring supplier quality with small quantities Statistical Analysis Tools, Techniques and SPC 10
Uncertainty of staging a short line scale standard on longer measuring machine? Measurement Uncertainty (MU) 4