Metallurgical or tensile testing for new PPAP's or tooling re-cuts

J

JohnR

#1
Metallurgical for PPAP

Does it state anywhere in the standard about doing metallurgical or tensile testing for new PPAP's or tooling re-cuts? We do a hot stamping process and re-cut tools frequently which we PPAP but are questioning the need to do metallurgical every time also.

John
 
Elsmar Forum Sponsor
#2
Refer to I.2.2.8/I.2.2.8.1 of the 3rd ed. PPAP. If the material requirement is on the design then you would need a material spec.
Ex. If 304SS is specified you would need the copies of the analysis.
 
A

Al Dyer

#3
And you would need to test against that spec before using a batch of new material delivered under that spec. Receiving Inspection, not PPAP.

Otherwise,

Are you using the same machine and tool types?
Is it something like inserts that are off the shelf items?
 
Thread starter Similar threads Forum Replies Date
I I'm looking for any Metallurgical Labs in PA, or MD General Measurement Device and Calibration Topics 3
A Good metallurgical website ? IATF 16949 - Automotive Quality Systems Standard 2
M Testing Tensile Strength of Materials AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
P Test Method Validation for Tensile Strength Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
A Tensile Strength Testing of Rubber Underwear Manufacturing and Related Processes 2
D Raw Material chemical/Tensile Requirements Specifications (QQ-A-250/4, etc) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
M ASTM F 75-12 - Tensile properties Product castings ( 7.1 ) vs Casting alloys ( 7.2) Other ISO and International Standards and European Regulations 1
K How do you select the right grips for your tensile tests? Imported Legacy Blogs 0
R Tensile Test Strain Rate - Impact on the Test Results Manufacturing and Related Processes 3
E IEC 60601-1 Tensile Load Safety Factor IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
alonFAI Gauge R&R for a Peel Tester (tensile tester) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
T Destructive Tensile Test Sampling Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
Q Tensile Testing Transfer from one site to another site Manufacturing and Related Processes 2
D Manual Tensile Testing Pull Rate Speed Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
R MU (Measurement Uncertainty) of a Tensile Tester (e.g. Zwick Roell) Measurement Uncertainty (MU) 4
K Nadcap (AC7107/7 C, paragraph 6.1.b) NCR - Machining Tensile Specimens AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
S Marking of Tensile Test Specimen Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J Minor NC - No MSA study on Tensile Tester IATF 16949 - Automotive Quality Systems Standard 4
S Interpreting Level of Confidence - Round Robin for Tensile Testing - Help needed Statistical Analysis Tools, Techniques and SPC 4
7 Data Analysis of Tensile Strength Test - Graphical Presentation of Results Statistical Analysis Tools, Techniques and SPC 2
G Tensile Strength Distribution - Why a Weibull distribution is used? Reliability Analysis - Predictions, Testing and Standards 6
Z ISO 3108 Wire Rope Tensile Test Methods General Measurement Device and Calibration Topics 3
B SAE AS81914 - Convoluted Tubing Tensile Stress Various Other Specifications, Standards, and related Requirements 5
optomist1 Tensile Test Crimped Electrical Terminal Acceptance Criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
M Error in ASTM D3039 - 13.3.1 - Tensile Chord Modulus of Elasticity Various Other Specifications, Standards, and related Requirements 3
S Wire Pull Tensile Testing - Splice with multiple wires Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
7 SPC Monitoring for Pouches Manufactured Last Year - Tensile Strength Statistical Analysis Tools, Techniques and SPC 8
C MSA for Hardness Machine and Tensile/Compressive Machine Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
R Gage R&R on a Tensile Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
S Recalibration of a Tensile Tester after Moving Calibration Frequency (Interval) 7
Q Stability & Variability Studies - Tensile Testing Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
S Needs clarification on tensile test on SS class F 431 material as per ASTM A 473 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
M When to use Linearity and Bias - appropriate for paper tensile strength? Quality Tools, Improvement and Analysis 6
I Laboratory for Checking Tensile Strength using UTM (Universal Tensile Machine) General Measurement Device and Calibration Topics 13
I Does Anyone know how to check Universal Tensile Machine (UTM) ? Reliability Analysis - Predictions, Testing and Standards 5
D Validation of computer controlled tensile testers General Measurement Device and Calibration Topics 0
H Destructive Tensile Pull Test Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
Q Ford's for material test methods for tensile strength, compression deflection, etc. Customer and Company Specific Requirements 4
S Tensile made critical characteristic, but Cpk? High rate of rejection in a part Capability, Accuracy and Stability - Processes, Machines, etc. 9
W MSA for Destructive Testing - Tensile tester - Welding Processes Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M What distribution should I expect a tensile strength test to fit? Statistical Analysis Tools, Techniques and SPC 10
M MSA Study for tensile tester - Its difficult to do an MSA study on a destructive test Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
L What SPC method that I've must to control characteristic tensile strength? Statistical Analysis Tools, Techniques and SPC 1
T Tensile / Pull test standards / Specimens - 14 mil vinyl interior products Quality Tools, Improvement and Analysis 6
S Help request - ISO 1926:1979 - Cellular plastics - Determining tensile properties Software Quality Assurance 1
S Using Certified Results from your Supplier - Chemistry report and Tensile results Supplier Quality Assurance and other Supplier Issues 12
D Gage R&R - Destructive Test - Tensile Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
O MSA for Destructive Tests - Tensile test as an example Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
K Tensile Standards used to Verify a Tensile Testing Machine General Measurement Device and Calibration Topics 3
B Gage R&R Destructive Tests - Tensile tester to check for paper strength Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3

Similar threads

Top Bottom