Method of Disposition on Damaged Inspection,Measuring Test Equipment

A

alexi

#1
We have lots of damaged and unusable Inpection Equipment in our company. In connection to this, we tried to segregate some parts which we think can still be used (like the batteries and the cover). Our concern here are the metals and circuit board. how can we disposed them, are there proper ways to disposed this parts.. We are also on the process of getting certified for ISO 14001 and this disposition has a connection with the environment. ANybody who can help me?
thanks!
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration
Staff member
Admin
#2
You might want to post this in the ISO 14000 forum and see if you get a response.
 
Thread starter Similar threads Forum Replies Date
R BS EN 12060:1998 - Zinc and zinc alloys Method of sampling Specifications Manufacturing and Related Processes 4
M Test method validation - Is MSA (MSA1, MSA2, MSA3 and linearity) a good solution? Medical Device and FDA Regulations and Standards News 1
Pau Calvo How to motivate colleagues to use 8D method or similar Quality Manager and Management Related Issues 30
M Proper method to test flow of a regulator Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
V Minitab GRR crossed Xbar and r method macro needed Using Minitab Software 7
R Please share your method used for PEMS Validation IEC 62304 - Medical Device Software Life Cycle Processes 5
S AS9100D PEAR - Examples for organization's method for determining process results? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
Y Post Market Surveillance Indicators and Analysis method EU Medical Device Regulations 1
S Seeking efficient method to manage install base data Manufacturing and Related Processes 0
D 4M (Man, machine, method, materials) Management Manufacturing and Related Processes 3
Ron Rompen Measurement Method Challenge - Measure feature #91 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
C FDA on changing acceptance criteria re: analytical method validation US Food and Drug Administration (FDA) 1
M Issuing NCR for improper method statement submissions Internal Auditing 10
F Irradiation Sterilization Validation Maximum Dose - VDmax 25 method (ISO 11137) EU Medical Device Regulations 2
I "Method" vs "Process" - Differences Document Control Systems, Procedures, Forms and Templates 33
P Test Method Validation for Tensile Strength Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
C ICP versus AA: How to determine appropriate specification for assay method verification Qualification and Validation (including 21 CFR Part 11) 1
I Flatness - Rectangular part using the three jack method Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
B AS9102 Supplier Flow Down Method AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 7
M Control Method correspondence between PFMEA and CP FMEA and Control Plans 8
Q Qualitative or Quantitative? Risk method evaluation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
Ron Rompen Dual level holes - Measurement method suggestions wanted General Measurement Device and Calibration Topics 9
D Sampling method that is representative of the devices supplied by that distributor EU Medical Device Regulations 5
P Production Line Pump Cleaning Validation Method Question Qualification and Validation (including 21 CFR Part 11) 0
A Risks related to Method Validation and Stability Studies Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
Q ISO 9001 Risk control method - What could be the better way to control risks? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
Ron Rompen Ford Method - Position Capability with MMC Modifier Capability, Accuracy and Stability - Processes, Machines, etc. 14
J Inspection method for T10 Hex driver General Measurement Device and Calibration Topics 13
Q ISO 9001:2015 - Right method to address clause 6.1? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
S Stakeholder analysis Method Six Sigma 1
T ER Checklist - Method(s) of conformity EU Medical Device Regulations 1
T ISO 17025 Method Verification - One sided “F” test or two sided “F” test ISO 17025 related Discussions 1
B Dosimeter Calibration Method General Measurement Device and Calibration Topics 5
A Test method for presence or absence of hexavalent chromium on a metal coating RoHS, REACH, ELV, IMDS and Restricted Substances 4
S Response Surface Method to create design matrix in Minitab Using Minitab Software 5
T Method to assess Measurement System of a Continuous Process Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
G HPLC Method Equivalence between USP and EP Various Other Specifications, Standards, and related Requirements 1
S Test Method Validation or MSA for Batch Manufacturing Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
A Test Method Validation on Elongation Machine General Measurement Device and Calibration Topics 0
B Gage R & R on Visual Inspection using the Cross Tabulation Method IATF 16949 - Automotive Quality Systems Standard 4
C Method of Monitoring our Internally Produced Non-Conforming Products Quality Tools, Improvement and Analysis 7
C O-Ring Groove Measurement Method in CNC Machined Parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
G What's your favourite method of Electronic Folder Filing? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
C Flatness Measurement Errors from a Datum - Test Method General Measurement Device and Calibration Topics 3
Q Risk Impact - Risk Assessment Sample/Method per ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
M AS9100 7.6 - Check Method - PO Information AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 4
L ISO 17025 Para. 5.4.5 - Method (Calibration Procedure) Validation Requirements ISO 17025 related Discussions 2
M ISO 11137 - Verification dose audit for VD max method Other Medical Device Regulations World-Wide 7
D ISO 17025 5.10.2(e) - Test Method ISO 17025 related Discussions 4
J International Standards governing Test Method Validations ISO 13485:2016 - Medical Device Quality Management Systems 1
Similar threads


















































Top Bottom