Microbial Limit (Bioburden)on dry nonwoven that used for making Hand sanitizing wipes

A

Agbna

#1
Anyone has an idea about the microbial limit on dry nonwoven that used for making hand sanitizer wipes?
I appreciate Any information.:applause:
 
Elsmar Forum Sponsor

Ajit Basrur

Staff member
Admin
#2
Re: Microbial Limit (Bioburden)on dry nonwoven that used for making Hand sanitizing w

Welcome to the Cove :bigwave:

I came across these standards on the dry non woven materials but havent gotten to check - European Norm 13795 and AAMI - PB70:2003.
 
Thread starter Similar threads Forum Replies Date
Q US FDA Standard Limit for Swab Test Microbial and ATP Other US Medical Device Regulations 1
V Are microbial limit tests required for sterile products? Qualification and Validation (including 21 CFR Part 11) 3
J What Control Chart should be used for Microbial Limit (NMT 100 cfu/m3) Statistical Analysis Tools, Techniques and SPC 12
J How to Set Microbial Limits in Food Supplements Food Safety - ISO 22000, HACCP (21 CFR 120) 3
A Microbial exposure during use - Requirement 11.1(c) EU Medical Device Regulations 1
A EU MDR Annex I section 11.3 - Medical Devices labelled as having a specific microbial state EU Medical Device Regulations 7
P Standard for Microbial Limits for a Combination Device - Impregnated Retraction Cord EU Medical Device Regulations 1
A Class 8 100,00 Cleanroom - Airborne Microbial Count ISO 13485:2016 - Medical Device Quality Management Systems 6
S Microbial Standard for Bacteria, Fungus & Mold for Equipment Various Other Specifications, Standards, and related Requirements 9
D Food Sampling Matrix for Microbial Testing (number per batch) for Fast Food Processor Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
W Environmental Monitoring - Microbial Identification - Small medical device company ISO 13485:2016 - Medical Device Quality Management Systems 9
K Radius with specification only Max limit Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
J Setting accuracy limit for a read out General Measurement Device and Calibration Topics 4
M MSA Study Type 1 not capable. We are at the limit. And manufacturing wants to continue producing. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
S Heat Sealers Upper and lower limit setting during OQ for Heat Sealer Qualification and Validation (including 21 CFR Part 11) 0
T The “use-by“ time limit - Terminology discrepancy - MEDDEV & HS EU Medical Device Regulations 0
M Proper way to develop LCL when only given a lower spec limit Reliability Analysis - Predictions, Testing and Standards 7
B Narrow limit gauging Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
shimonv Symbol for temperature limit EU Medical Device Regulations 6
H How to control when control limit is out of Specs limit Statistical Analysis Tools, Techniques and SPC 11
K Small Sample - Lower Limit Probability Statistical Analysis Tools, Techniques and SPC 0
J0anne 90 Day Limit Imposed by NB to complete NCs raised at audit Preventive Action and Continuous Improvement 6
I Cleanroom Actions in case of Actions Limit Alarm Qualification and Validation (including 21 CFR Part 11) 3
S Minitab limit definition from R & R Using Minitab Software 4
L P-Chart Control Limit Calculation help Statistical Analysis Tools, Techniques and SPC 1
R How to calculate UCL (Upper COntrol Limit) and LCL (Lower Control Limit) Statistical Analysis Tools, Techniques and SPC 5
R Fixing of tolerance limit - Electronic weighing balance with the capacity of 150 Kgs General Measurement Device and Calibration Topics 5
N More Central Limit Theorem Questions Six Sigma 4
P No-go Ring Over the specifiaction limit Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
J Maximal limit of Aluminum in Polymer Medical Device Implants (EU) Other Medical Device and Orthopedic Related Topics 1
S CpK in Minitab when 0.0 is the lower spec limit Statistical Analysis Tools, Techniques and SPC 7
A 61010-1 Accessible Parts - Limit Values and Crepage and Air Clearance Distances Other Medical Device Related Standards 1
B What is the safe Temperature Limit for Medical Device with blood contact ? IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
M Specific Capability case - Target Value is same as the Lower Limit Capability, Accuracy and Stability - Processes, Machines, etc. 9
A CQE exam primer Control Limit question Statistical Analysis Tools, Techniques and SPC 2
S SPC Control Limit Calculation Statistical Analysis Tools, Techniques and SPC 2
J Exceeding the DC Leakage Current Limit IEC 60601 - Medical Electrical Equipment Safety Standards Series 8
B Setting Lower Control Limit on Attributes Charts Statistical Analysis Tools, Techniques and SPC 9
A MSA (Measurement System Analysis) for Characteristics with One Tolerance Limit Capability, Accuracy and Stability - Processes, Machines, etc. 10
R Maximum Reverse Speed Limit for Powered Wheelchairs Other US Medical Device Regulations 2
N Protein content limit in condom according to ASTM standard Other ISO and International Standards and European Regulations 3
A Is there a time limit on customer claims? Quality Manager and Management Related Issues 8
M QC Limit Sample template wanted Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
I Shewhart Constants vs Central Limit Theorem in calculating Control Limits Statistical Analysis Tools, Techniques and SPC 18
P CCP Critical Limit and Corrective Action - Plastic Brush Parts Food Safety - ISO 22000, HACCP (21 CFR 120) 14
A Change Ratio [Guideline in Control Limit Update] Statistical Analysis Tools, Techniques and SPC 3
D Appropriate Statistical Methods to set up an Alert/Warning Limit Quality Assurance and Compliance Software Tools and Solutions 15
R Current Limit in IEC 60601 Dielectric Strength Testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
A How to set Wirebond Alarm Limit? Statistical Analysis Tools, Techniques and SPC 2
R How to understand the IEC 60601 50 ms limit? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2

Similar threads

Top Bottom