MIL-STD-120 replacement? Calibration Work Instructions refer to MIL-STD-120

R

rsmoot

#1
Hi - 1st time poster here -
I'm a new QA manager currently reviewing all of the companies calibration procedures. We're working toward getting registered to 9001:2008 (hopefully in a few months)

During the documentation review I'm trying to be thorough, and verify all of the "referenced documents" within each work instruction. I have found that a number of calibration work instructions refer to MIL-STD-120. MIL-STD-120 was cancelled and not replaced or superceded.

For most of the gage work instructions, I have been able to find an appropriate (currently released) standard (either ANSI, or ASME, etc.) and have updated the work instructions, released and retrained accordingly.

For others (such as "Angle Plates" for example), I can't seem to locate a currently released "accepted standard" to reference in the work instruction in place of MIL-STD-120.

My question is not necessarily about "angle plates" per se - it is more general - Is it ok to reference the MIL-STD-120 in a currently released work instruction even though the referenced standard has been cancelled, and it has not been replaced or superceded?

If not - Suggestions? I'm at a loss on this one.

or am I overdoing it?
 
Elsmar Forum Sponsor

Jim Wynne

Staff member
Admin
#2
Re: MIL-STD-120 replacement?

Hi - 1st time poster here -
I'm a new QA manager currently reviewing all of the companies calibration procedures. We're working toward getting registered to 9001:2008 (hopefully in a few months)

During the documentation review I'm trying to be thorough, and verify all of the "referenced documents" within each work instruction. I have found that a number of calibration work instructions refer to MIL-STD-120. MIL-STD-120 was cancelled and not replaced or superceded.

For most of the gage work instructions, I have been able to find an appropriate (currently released) standard (either ANSI, or ASME, etc.) and have updated the work instructions, released and retrained accordingly.

For others (such as "Angle Plates" for example), I can't seem to locate a currently released "accepted standard" to reference in the work instruction in place of MIL-STD-120.

My question is not necessarily about "angle plates" per se - it is more general - Is it ok to reference the MIL-STD-120 in a currently released work instruction even though the referenced standard has been cancelled, and it has not been replaced or superceded?

If not - Suggestions? I'm at a loss on this one.

or am I overdoing it?
It doesn't matter if the thing has been withdrawn--anyone who wants to can still use it as reference or standard.

ETA: Welcome to the Cove.
 
Thread starter Similar threads Forum Replies Date
S How to calibrate a Bore Indicator? MIL-STD-120 "Gage Inspection"? General Measurement Device and Calibration Topics 4
R Is there a update Revision on Mil-Std-120 Gage Inspection Standard & Requirement General Measurement Device and Calibration Topics 4
C MIL STD vs ASTM General Measurement Device and Calibration Topics 4
D ANSI/ASQC Z1.9 VS MIL-STD-1916 for Continuous Sampling Lean in Manufacturing and Service Industries 2
Marc MIL-STD-810H - 31 January 2019 Various Other Specifications, Standards, and related Requirements 0
K MIL-STD-2000 Certification Requirements Manufacturing and Related Processes 9
G Mil-Std-130N, can calibration be a nationally traceable standard? Various Other Specifications, Standards, and related Requirements 0
M Help interpreting MIL-STD-105E Single Sampling Plans Tables Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
A MIL STD 105 D or ISO 2859-2? Receiving Metal Sheets Quality Tools, Improvement and Analysis 6
A Inspection Plans - How to choose AQL (MIL STD 105E) Excel .xls Spreadsheet Templates and Tools 1
J Mil Std 810 G test 516 vs IEC 60068-2-27 - Classic Waveform Shock Various Other Specifications, Standards, and related Requirements 1
C Medical Device Tracking Sampling Plan using MIL-STD-105E Other US Medical Device Regulations 4
alonFAI Fungus Testing per MIL-STD-810F Reliability Analysis - Predictions, Testing and Standards 6
E Post Machining Casting Defects with MIL-STD-2175 Requirements - Responsibility Manufacturing and Related Processes 9
Mikishots Trying to locate a LEGIBLE MIL-STD-105E copy Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
K Mil-Std-2132 (Nondestructive Examination Requirements) needed Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
T Difference between MIL-STD-105 and ISO 2859 AQL - Acceptable Quality Level 2
H Section Modulus - MIL-STD-883, Method 2004 - Definition Manufacturing and Related Processes 1
S MIL-STD-1686 for ESD Compliance help wanted Various Other Specifications, Standards, and related Requirements 3
V Using an AQL of 0,0 with MIL STD 105E AQL - Acceptable Quality Level 4
S Parts, Materials and Processes (PMP) Control Plan - Mil-Std-3018 Misc. Quality Assurance and Business Systems Related Topics 1
F MIL-STD-2073-1, Standard Practice for (US) Military Packaging Various Other Specifications, Standards, and related Requirements 0
M Evolution has taken away MIL-STD-1520 C - What to use now? MRB and PMR Nonconformance and Corrective Action 5
T Significance of Key Characteristic definition change vs. MIL-STD-1916 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
P Using Mil-STD-2000A as soldering specification Various Other Specifications, Standards, and related Requirements 14
T Mil Std Certification for a Semiconductor Burn-In Process provider Various Other Specifications, Standards, and related Requirements 2
A Definition Functional and Allocation Baselines - MIL-STD-973 Definitions Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
A Use of sampling plans like MIL-STD-105 E or ANSI Z1.4? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
A Use of sampling plans like MIL-STD-105 E or ANSI Z1.4 for setting AQL's? AQL - Acceptable Quality Level 13
S MIL-STD-1916 vs MIL-STD-105E, which do you choose? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
C How to select the requirements for Continuous Sampling Plan (CSP-1&F), Mil-Std 1235C? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
K Tell me why I should no longer reference MIL STD 105E? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 16
H Big Batch (Large Lot) Sampling - Label Printing - MIL-STD-105E Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
I Asian Supplier Sampling Plans besides MIL-STD-105? My thought was ISO 2859? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
P MIL-STD 1235C - Is it still Valid or has it been Superseded by another Standard? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
B Electronics Die Component - Military Standard 883 vs. MIL STD 750 TM2010 B. Various Other Specifications, Standards, and related Requirements 4
D Why should you use a Configuration Management Standard such as EIA 649 or Mil-Std-973 Document Control Systems, Procedures, Forms and Templates 3
D Why MIL-STD-105E is obsoleted but ANSI/ASQC Z1.4 is still implemented? Need Opinion Inspection, Prints (Drawings), Testing, Sampling and Related Topics 14
A Looking for MIL-STD-1686B (MIL-STD-1686 revision B) Various Other Specifications, Standards, and related Requirements 4
D The Best Way to Document In-Process Inspections using MIL-STD-1916 1/12 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
T Acceptable AS9100 Receiving Inspection Sampling Plan - ANSI/ASQCZ1.4 vs. Mil-STD-105E Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
D Mil-Std-1916 Inspection Sampling question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
E I need MIL-DTL-5765 - MIL-STD-5765 F Various Other Specifications, Standards, and related Requirements 2
G Does ISO 17025 Cover the elements in MIL-STD-45662A? ISO 17025 related Discussions 5
GStough Has Anyone Heard of Mil Std 155D? Various Other Specifications, Standards, and related Requirements 4
B How to work with Mil Std 105E OC curves? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
S Receiving Inspection Plan Sample Size - Measuring Mil-Std Rivets - Fasteners Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
A Qualification Testing of New Products - Is there a MIL-STD or ANSI standard? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
P Mil-Std-105e - Average outgoing quality (AOQ) & Average outgoing quality level (AOQL) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
Marc The History and Rationale of the MIL-STD-810 testing standard Book, Video, Blog and Web Site Reviews and Recommendations 0

Similar threads

Top Bottom