SBS - The Best Value in QMS software

Mixed data collection (SPC) for different mold cavities

#1
Hi,
My company is producing rubber parts for automotive customers. We have a new prodcut with a very-high-number-cavity tool. Cavities are not identified. We have to perform SPC for a certain product parameter, but it is impossible to do it per cavity.
Till now we work with max. 4 cavity tools, so the separated data collection per cavity was not an issue. Does it make sense to make SPC without cavity-differentiation?
 
Elsmar Forum Sponsor

Bev D

Heretical Statistician
Staff member
Super Moderator
#2
Re: Mixed data collection (SPC) for diff. cavities

you'll never know until you try...
it might be possible if there is very little difference between cavities.

the complication here is that the within subgroup variation is controlled by the fixed cavity to cavity differences and the sugbroup to subgroup variation is controlled by the shot to shot factors.

so you might also try two separate charts. the first is an IMR chart for the subgroup averages and then a R or S chart for the within subgroup variation...
 
Thread starter Similar threads Forum Replies Date
GURU SDI Rust preventive oil mixed with kerosene Problem Solving, Root Cause Fault and Failure Analysis 2
H Taguchi mixed model DoE [L16 (4^3 2^6): factors interaction and ANOVA calculation Using Minitab Software 3
M Mixed Reality - What kind of possibilities can you imagine? Coffee Break and Water Cooler Discussions 1
G How to create a mixed OAs in Minitab Using Minitab Software 1
D What is your experience with FDA using "mixed load" i EO sterilization Other Medical Device Related Standards 1
C Flow Meter calibration for mixed gases Calibration and Metrology Software and Hardware 1
M AQL (Acceptable Quality Level) for Mixed Part Defect IATF 16949 - Automotive Quality Systems Standard 1
D Mixed Level Pull Simulation - Stock Evolution and Machine Load Lean in Manufacturing and Service Industries 3
S Batch Traceability for Bulk Materials which are mixed in the Storage Tank IATF 16949 - Automotive Quality Systems Standard 6
M Mixed Use of Corporate and Site Level Procedures and Forms in the Quality System ISO 13485:2016 - Medical Device Quality Management Systems 1
D Mixed Automotive and Non-Automotive Quality Systems IATF 16949 - Automotive Quality Systems Standard 22
J Any MMA (Mixed Martial Arts) fans here? Coffee Break and Water Cooler Discussions 33
K What to do when form numbers get mixed up on your documents.... Document Control Systems, Procedures, Forms and Templates 2
H Medical Devices and Mixed Lots Manufacturing and Related Processes 4
P Mixed Model Assembly Line Control Plans - Many different options that are available FMEA and Control Plans 2
D Mixed Product - Keeping one product from being mixed with similar product Misc. Quality Assurance and Business Systems Related Topics 12
T Data verbiage Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
S QR/2D Codes & Data Strings Misc. Quality Assurance and Business Systems Related Topics 1
A Need to calculate tolerance Intervals with a set of non-normal data and 3-Parameter Weibull distribution Using Minitab Software 0
B GR&R Destructive Data Analysis Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
E Raw data retention for Diagnosis Results EU Medical Device Regulations 4
Y Exporting data to the cloud is a "Significant Change"? EU Medical Device Regulations 5
Z Data sheet from McMasterCarr enough for RoHS/REACH documentation? REACH and RoHS Conversations 4
S Eudamed data fields EU Medical Device Regulations 4
J Need Help with FPY Data in Assembly Process Manufacturing and Related Processes 7
Q AMS 2750 E or F Continuous Furnace TUS Data Collection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
M Reduce occurrence rating based on the PMS data and customer complaint data ISO 14971 - Medical Device Risk Management 2
J Customer Complaint & SCAR, false data Nonconformance and Corrective Action 14
Brizilla Employee Data Privacy Policy - ISO 9001:2015 requirement(s)? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
D Safety data sheets software REACH and RoHS Conversations 2
M Data Protection and Privacy Policy - looking for a template/example EU Medical Device Regulations 1
S Non parametric test for semi-quantitative data. Statistical Analysis Tools, Techniques and SPC 5
M Disabling measurement data during fault conditions IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
C EU MDR - Annex II 6.1 Pre-clinical and clinical data EU Medical Device Regulations 4
P Ppk results shown as asterisk after the transformation of Non-normal data Using Minitab Software 4
lanley liao How to correctly understand the bullet list d) of 6.3 Analysis of Data for API Spec Q1 Oil and Gas Industry Standards and Regulations 7
Steve Prevette Informational I am presenting a webinar Thursday - "Data Driven Decision Making" - 19 November 2020 Statistical Analysis Tools, Techniques and SPC 5
qualprod Best practice to ensure inputting of data in production Lean in Manufacturing and Service Industries 19
D Preservation of Electronic Data / Information Technology ISO 13485:2016 - Medical Device Quality Management Systems 5
M Comparing data from destructive testing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
DuncanGibbons Technical Data Package vs Digital Product Definition APQP and PPAP 0
Z Putting back excluded rows/data points in a control chart Using Minitab Software 0
F General Data Protection Regulation (GDRP) CE Marking (Conformité Européene) / CB Scheme 6
Z Minitab - Updating Graph with specific data points Using Minitab Software 2
E PEMS Hazards - IEC 60601 Clause 14.6 - Internal data use - Pressure sensor IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
K Transform variable data into attribute data Reliability Analysis - Predictions, Testing and Standards 24
R Clinical evaluation without clinical data - MDR Article 61(10) EU Medical Device Regulations 8
H Capability Data for Paint Thickness on Painted Parts Statistical Analysis Tools, Techniques and SPC 10
D BS EN 62304 - Medical-Relevant Data C.5 - Definition of IEC 62304 - Medical Device Software Life Cycle Processes 5
T Submitting MR Compatibility Data for 510(k) Cleared Device Other Medical Device and Orthopedic Related Topics 2

Similar threads

Top Bottom