SBS - The best value in QMS software

Mixing lots at the platers - Electrical Contacts

Standard Work Instruction Software by Dozuki
Elsmar Forum Sponsor
G

gleclair

#12
#12
Working in the metal finishing sector, as a company we do not mix orders of the same parts to make a load. Each order that is sent in with a diffrent po is considered a diffrent lot. If the lot is too small to make a load, we have (what we call) filler to make the load size. I think that the plater was mixing your parts to save time and bill you for both orders. I hope he only billed you for one order not 2. my :2cents:
glen
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
D Performance of high shear mixer (or rapid mixing granulator Qualification and Validation (including 21 CFR Part 11) 4
C Clean room injection molding, raw material mixing requirements ISO 13485:2016 - Medical Device Quality Management Systems 2
C Raw material Mixing / Preparation for clean room class C injection molding Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
C Cement Mixing Software Validation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
S Manufacturing Error-proofing Packers mixing up which 4 Mats go together in a Kit Manufacturing and Related Processes 3
N Which is the Best Mixing Process for Colorants going into Plastic? Manufacturing and Related Processes 7
M Food Transportation the Weakest Link? Mixing cargo in food trucks Food Safety - ISO 22000, HACCP (21 CFR 120) 0
M Raw Material Handling & Mixing in Plastic Injection Moulding Manufacturing and Related Processes 5
S Consequences of mixing Pb-free and Pb-containing components Manufacturing and Related Processes 2
N Calibration of Water Meters which dispense the water into our mixing vessel General Measurement Device and Calibration Topics 12
H Quality Control for Rubber Mixing and/or link to related forum Inspection, Prints (Drawings), Testing, Sampling and Related Topics 27
B TS16949 Clause 7.1 in plastic pellet 'color mixing' and color compounding' process IATF 16949 - Automotive Quality Systems Standard 1
N To control prints or not to control prints, and mixing the two Document Control Systems, Procedures, Forms and Templates 20
R Identification and Traceability - Mixing different work orders of the same part 7.5.3 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
M Text or Flow Charts? Mixing flow charts and text in procedures QS-9000 - American Automotive Manufacturers Standard 4
K 510k FDA review, will they accept Biocompatibility result generated using feasibility product lots? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
Jane's Like-for-like critical raw material change qualification - type of testing/ number of lots required ISO 13485:2016 - Medical Device Quality Management Systems 4
K Analysis variation among the lots during cpk calculation. Design and Development of Products and Processes 1
A Gauge Study for Small Lots Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
V 3 PQ lots mentioned as requirement in PPAP. Is this necessary? APQP and PPAP 2
N FDA Traceability Requirements - Component lots ISO 13485:2016 - Medical Device Quality Management Systems 2
lilybef Number of lots required for stability testing of a Class II device in the 510(k) Qualification and Validation (including 21 CFR Part 11) 3
L Why is initial production units, lots, or batches, or their equivalents required for Design Validation? US Food and Drug Administration (FDA) 3
Q Is it acceptable to mix components from two different lots into an assembly? ISO 13485:2016 - Medical Device Quality Management Systems 1
C Sampling plan for destructive tests on small lots ISO 13485:2016 - Medical Device Quality Management Systems 20
S Labeling for Validation Lots Products EU Medical Device Regulations 5
D Number of Manufacturing Lots for Process Validation Manufacturing and Related Processes 10
T Combining multiple lots of the same raw component for packaging or kitting 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
K Sampling Plan for Small Lots of Single Use Items Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
Ronen E Covidien recalls some Monoject Insulin Safety Syringe lots Other Medical Device and Orthopedic Related Topics 0
Ronen E Ethicon recalls some ECHELON 60 ENDOPATH? STAPLER Endoscopic Linear Cutter lots Other Medical Device and Orthopedic Related Topics 0
Ronen E Moog Medical Devices Group is Recalling certain Lots of IV Sets Other Medical Device and Orthopedic Related Topics 1
V Sample Size for Attribute Data - Large Production Lots Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
T How to calculate AQL on Small Lots AQL - Acceptable Quality Level 1
A Looking for a wordsmith - Little compensation - Lots of appreciation! General Auditing Discussions 8
T Sampling Plan for Small Lots between 20 and 100 or so units Statistical Analysis Tools, Techniques and SPC 1
A What is a good Sampling Plan for LARGE Lots of Supplier Components Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
M Zero Acceptance Number Sampling Plans for Isolated Lots Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
B Addressing Lots that were measured with Out of Tolerance Gage Pins Nonconformance and Corrective Action 5
N Re-Packaging and Re-Labeling Bulk Lots of Class II Medical Devices 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
P Testing 3 Manufacturing Production Lots EU Medical Device Regulations 4
N AQL (Acceptable Quality Level) Sampling Plan for Small Lots AQL - Acceptable Quality Level 8
T Partial Shipping of Lots - Shipping of product prior to the lot being completed ISO 13485:2016 - Medical Device Quality Management Systems 4
F Determining the Number of Samples for receiving large lots of wire? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
S Silver Plating (Lots of questions) Manufacturing and Related Processes 8
A Traceability and Control of Manufacturing Lots IATF 16949 - Automotive Quality Systems Standard 7
Z Tracking Lots for Reduced and Tightened Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
M FOC (3 lots) - First of Code - Are you still doing 3 lots for FOC? Other Medical Device and Orthopedic Related Topics 1
D Samples from Lots of Incoming Raw Materials - Sampling Protocol Help Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
D Device History Record - Single file for each lot with all the lots history? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 9

Similar threads

Top Bottom