Monitoring and measuring equipment for occupational health and safety purposes

Jen Kirley

Quality and Auditing Expert
Leader
Admin
#11
I am in railway transport....but that doesn't matter, I think.
So, basically, u are saying that measuring and monitoring progress toward achievement of OHS objectives and effectiveness of operational controls, training , workers participation , internal audit etc. - is not an indicator of effectiveness of OHS mgm. system?? Because for measuring and monitoring these the equipment u suggested is not used (not always, anyway).
I asked because I might be able to think of some examples based on your industry. In think in your case some stressors that can be monitored include:
This is what I could think of. Please note that the monitoring would be for health & safety if it was for employees. If we are referring to noise, vibration and air emissions to surrounding areas we would think of that as environmental.

When the various processes in a management system are monitored, you and monitoring the system because they are part of the system.

I hope this helps.
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
J Register of the monitoring and measuring equipment AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
B Measuring and monitoring equipment - Understanding which procedures to be compliant with ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 6
E ISO 13485 7.6 Control of monitoring and measuring equipment - Assess the Validity ISO 13485:2016 - Medical Device Quality Management Systems 4
A Calibration Interval - AS9100 - Control of Monitoring and Measuring Equipment Calibration Frequency (Interval) 8
R Auditing Fitness of Purpose for Monitoring and Measuring Equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
Q Scope in procedure and content for 7.6 Monitoring and Measuring Equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
D Does 7.6 Control of Monitoring and Measuring Equipment align with ISO 17025 ISO 17025 related Discussions 4
G Control of Monitoring and Measuring Equipment for Servicing Photocopiers ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
S ISO9001 Exclusion 7.6 Control of Monitoring and Measuring Equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
M 7.6 Control of Monitoring and Measuring Equipment - Monitoring vs. Measuring IATF 16949 - Automotive Quality Systems Standard 2
GStough Human Capital: How to Meet Requirements of 7.6 (Monitoring/Measuring Equipment)? Service Industry Specific Topics 10
G 7.6 Control of Monitoring and Measuring Equipment vs. 7.6.1 Measurement Systems Analy IATF 16949 - Automotive Quality Systems Standard 15
Q Soldering and AS9100 - Are soldering irons "monitoring and measuring equipment"? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
I Clarification of ISO 9001: 2008 Section 7.6 - Monitoring and measuring equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
D Control of monitoring and measuring equipment - infrared thermometer for cross-check ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
W Computer Software - ISO 9001 Clause 7.6 Control of Monitoring and Measuring equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
J Configuration Management - ISO 9001 - 7.6 Monitoring and Measuring Equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
S Measuring Equipment and Monitoring Equipment - Verification ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 17
eule del ayre Clause 7.1.5 Monitoring and measuring resources IATF 16949 - Automotive Quality Systems Standard 14
Cats Clause ISO 9001:2015 7.1.5 Monitoring and measuring resources: Application to training providers ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
J Calibration cycle for monitoring & measuring tools used in medical device manufacturing General Measurement Device and Calibration Topics 5
Cats Clause ISO 9001:2015 Monitoring and measuring resources. Application a service industry ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
D Monitoring and measuring resources - Example of how section ISO 9001 7.1.5 would apply to a manufacture of software ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
qualprod Complying with ISO 9001:2015 - 9.1.1 b - Monitoring, measuring, analyzing and evaluation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
K ISO 13485:2016 Cl. 4.2.3 - Determine QMS Processes, Monitoring, Measuring, etc. ISO 13485:2016 - Medical Device Quality Management Systems 4
A Monitoring and Measuring Resources (7.1.5) - Clarification ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
F Check List and Questions for Auditing Monitoring and Measuring Devices General Measurement Device and Calibration Topics 1
R How to document Software used as Monitoring and Measuring Devices (7.6) Calibration and Metrology Software and Hardware 1
I Monitoring and measuring Imported Legacy Blogs 2
M Pressure gage on a machine-monitoring tool or measuring tool? IATF 16949 - Automotive Quality Systems Standard 9
B Clarification on 7.6 Control of Monitoring and Measuring Devices Note AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
M Effective Control of Monitoring and Measuring Devices - Unused Devices AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
J Compliance with ISO 9001 Clause 7.6 Control of Monitoring & Measuring Devices ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
I Supplier Controls and Monitoring and Measuring ISO 13485:2016 - Medical Device Quality Management Systems 3
Sidney Vianna ISO 10004:2012 - Customer satisfaction - Guidelines for monitoring and measuring Other ISO and International Standards and European Regulations 18
R Analysis of Data vs. Monitoring and Measuring - ISO13485 requirements ISO 13485:2016 - Medical Device Quality Management Systems 13
D Control of Measuring and Monitoring Instruments General Measurement Device and Calibration Topics 5
R Controlling and monitoring of measuring devices - AS9100 General Measurement Device and Calibration Topics 3
R ISO 13485 Clause 7.6 Control of Monitoring and measuring devices - Requirements ISO 13485:2016 - Medical Device Quality Management Systems 10
D 8.2.1 Monitoring & Measuring customer satisfaction ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
L How to comply with AS9100 Clause 7.6 - Monitoring and measuring devices to be used AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 31
E When would a MMD (measuring & monitoring device) not accepted for servicing? Measurement Uncertainty (MU) 5
S Control of monitoring and measuring devices - Computer forensics company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
E Service and Compliance with 8.2.4 Monitoring and Measuring ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
L Control of Monitoring and Measuring Devices - Clause 7.6 Exclusion? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
A Suggestions for: Control of Monitoring and Measuring Devices? (see 7.2.1) (1) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 33
L What should we do if we can't Measure an Aspect? Measuring and monitoring Miscellaneous Environmental Standards and EMS Related Discussions 5
J How to accomplish ISO 13485 Clause 8.2.3 Monitoring and Measuring? ISO 13485:2016 - Medical Device Quality Management Systems 5
K Process monitoring, measuring and analyzing, does this means all company processes? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
3 Calibration Frequency - Control of Monitoring and Measuring Devices - Clause 7.6 Calibration Frequency (Interval) 14

Similar threads

Top Bottom