MU for DSC (Differential Scanning Calorimetry) for Polymer Testing

B

blueicecube2

Involved In Discussions
#1
#1
Hi. I'm a newbie in Calorimetry Testing.

Is there by any chance anyone would be familiar enough with Differential Scanning Calorimetry for polymer testing to help enlighten me if the test best follows GUM or EuraChem method e.g bottom top or top bottom method?

Appreciate your help. Thank you.
 
Download Free White Paper
Elsmar Forum Sponsor
Hershal

Hershal

Metrologist-Auditor
Trusted Information Resource
#2
#2
I would go Eurochem. They tend to be a bit more focused on specifics. GUM is fantastic but very general.

Calorimetry is a speciality, and differential even more so.

Hope this helps.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
V Study About Raw Materials (Polymers) - DSC, FTIR,TGA, and SEM Images Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
T DSC Troubleshooting Guide-controlled document or not? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 15
J Cleanroom Differential Pressure Monitoring, frequent manual observation US Food and Drug Administration (FDA) 6
Ajit Basrur MS Excel to study Correlation between Humidity & Differential Pressure Excel .xls Spreadsheet Templates and Tools 7
S What is the minimum pressure differential required for ISO Class 8 Clean Room? ISO 13485:2016 - Medical Device Quality Management Systems 3
V Determining the Range and Limits for Differential Pressure ISO 13485:2016 - Medical Device Quality Management Systems 3
Chennaiite Automobile Differential Mechanism Explanation Video - Amazing Book, Video, Blog and Web Site Reviews and Recommendations 4
Jerry Eldred Need to spec a L.F. Differential Amp for a Calibration General Measurement Device and Calibration Topics 2
T Electronic Differential Level Gage R&R Procedure Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
Mustapha Paper Record Scanning and Discarding ISO 13485:2016 - Medical Device Quality Management Systems 5
Ajit Basrur Any ISO standard or guidance documents on barcode and scanning? Other Medical Device Related Standards 1
R Document Retention - Discard hard-copies after scanning? ISO 13485:2016 - Medical Device Quality Management Systems 2
V Inspection with 3D Scanning - Reference Data Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
optomist1 Recommend Primer Details of Non-Contact White/Blue Light Scanning General Measurement Device and Calibration Topics 0
Marc General Motors - 3D Scanning the Competition World News 2
F CMM Scanning Feature Delays - Brown and Sharpe automatic CMM using PC-DMIS CAD 4.3 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
M Scanning Old Documents (Records) Records and Data - Quality, Legal and Other Evidence 4
M Can an Internal Buttress Thread be inspected with a Zeiss CMM with a scanning probe Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
A X-Ray for Dimensional Inspection and Scanning for Defects within Polyurethane Foam Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
B X-Ray / Scanning systems - Material - Celcon M90, 2-3mm thick General Measurement Device and Calibration Topics 3
F Quality Accreditation for Scanning Bureau AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
J Gage R&R - Operators scanning in defect codes - PCB w/various solder joint defects Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2

Similar threads

Top Bottom