SBS - The best value in QMS software

Need Integrated Management System Manual (ISO 9001, 14001 & OHSAS 18001)

S

SA_FETY

#1
#1
Dear All,

Pls guide me... how to make the integrate management system (ISO 9001,14001,OHSAS 18001) .. also upload some guideline documenets, manuals, forms,etc...


Thanks in advance.:D
 
Standard Work Instruction Software by Dozuki
Elsmar Forum Sponsor
Randy

Randy

Super Moderator
#2
#2
Re: Need Integrated Management System Manual(ISO 9001,14001,ohsas 18001)

SA_FETY said:
Dear All,

Pls guide me...


Thanks in advance.:D
Click to expand...

OK....On the menu bar use the button labeled Search type in the parameters you want and start looking.

You're asking for a lot of time and material that in one swoop. All of what you are looking and asking for is already posted and freely available to anyone who just takes the time to hunt around for it.
 
C

Cornwap

#3
#3
Hi SA_FETY,

BSi published PAS99:2006 Specification of common management system requirements as a framework for integration.

When I first developed an IMS I retyped all of the clauses of the three standards into a spreadsheet then aligned all of the common items e.g. Management Review, Internal Audit etc. I then used this to identify how / where I could cover all three standards in a common way e.g. it is quite easy to cover the management review requirements of all three standards with a common agenda. For me this process was also important in developing my thinking into an integrated rather than parallel approach.

Best regards
Phil
 
automoto

automoto

Involved In Discussions
#4
#4
Briefly

Integrate management system can be made by incorporate requirements of the standards which are almost the same. Examples of those requirements are: internal audits, corrective and preventive actions, documents/records control… You don’t need to make three different systems for those requirements, but you shall make on management system.

Search the forum for additional information’s and examples…

Aleš
 
S

shohreh

#5
#5
Dears,

Thank you all for the valuable information posted. In our Co. we have 3 systems (QMS, ISMS & EMS) which we have integrated the common requirements between them. We are planning to get the OHSAS and at the same time BCM. Kindly inform if it would be possible to integrate the new systems along the rest.

Thank you and regards,
 
Randy

Randy

Super Moderator
#6
#6
We are planning to get the OHSAS and at the same time BCM. Kindly inform if it would be possible to integrate the new systems along the rest.
Click to expand...

Yes and you would not be the 1st. As a note, BCM is not developed along PDCA-CI.

As for using PAS 99........not much activity seems to be happening there from my point of view
 
Last edited by a moderator:
S

shohreh

#7
#7
as for PAS99; we were informed that a certificate will be issued but at the same time a separate certificate will be issued for each system (BSI stated) and also they have mentioned that ther are the only issuers for PAS99, although other certification bodies have it.
 
J

jaara2010

#8
#8
Pls .. i established an integrated management manual but I can not complete it .. Pls help me.
i want integrated management manual ready For comparison and correction.
thank u 4 all.
 
G

guruprasadb

#10
#10
I am also trying for the same if any body could help with some good example of manual and 1 or 2 procedures then it could be very helpful.

Thanks in advance
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
P Does QSE integrated Management System need only one representative? Quality Manager and Management Related Issues 7
V Certified Auditor - Need of additional certification specific to industry ( GMPs) ASQ vs ECA vs others Professional Certifications and Degrees 0
D Low risk IVD study in the UK, do I need MHRA approval? UK Medical Device Regulations 1
A Medical Device Contract Manufacturer - Does the CM need to register with FDA? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
J Records Control - Does each individual record need to be numbered? Records and Data - Quality, Legal and Other Evidence 2
N Is there a need for clinical test of Class IIa products (for MDR)? EU Medical Device Regulations 2
J Do Software Subcontractors need to be ISO13485 compliant in the EU? EU Medical Device Regulations 3
K Do I need a "State of the art" plan? CE Marking (Conformité Européene) / CB Scheme 1
S Need advice for schooling Quality Manager and Management Related Issues 6
R What information do i need to get from the device manufacturer 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
S Need guidance on project ISO 13485:2016 - Medical Device Quality Management Systems 2
H Need MSA 4th ed. compliant attribute MSA template General Measurement Device and Calibration Topics 4
J Need Change Control Yes/No Decision Tree Template ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
C Does an accessory need an IFU if it use is discussed in the Parent device IFU? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
B Countries with no need for FSC (Free sales certificate) Other Medical Device Regulations World-Wide 0
R The term "Benefit Risk Ratio" in EU MDR, do I need to present benefit risk analysis as a RATIO Risk Management Principles and Generic Guidelines 4
A Brexit When does the UK responsible person need to be in place? UK Medical Device Regulations 10
R Do we need issue ECN (Engineering Change Notice) towards updated Material Specification? Design and Development of Products and Processes 2
N IPC-A-630 - Is this free or do i really need to pay for it? Manufacturing and Related Processes 4
C ISO/ IEC 17021 Resource requirement (need help) Document Control Systems, Procedures, Forms and Templates 5
P Need a programmer for QVI's VMS software for optical inspection machine Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
silentmonkey How to decide what characteristics need to be verified during incoming inspection? ISO 13485:2016 - Medical Device Quality Management Systems 5
D Change Approval Requirements - Does every change need formal customer approval? Design and Development of Products and Processes 17
T Do I need a qualified compiler for class B software? IEC 62304 - Medical Device Software Life Cycle Processes 3
E 13485:2016, Sections 4.1.6, 7.5.6 and 7.6 - Validation of Software - Need some Advice please ISO 13485:2016 - Medical Device Quality Management Systems 3
C ISO 13485 :2016 - CAPA - Does every CAPA need to be checked by regulations? ISO 13485:2016 - Medical Device Quality Management Systems 9
L Proof of Concept Studies - Do we need to comply with SAE reporting? Medical Device and FDA Regulations and Standards News 3
gunnyshore Adding a new facility - do I need to submit an amendment to the MDL or MDEL, or both? Canada Medical Device Regulations 3
N FDA UDI - Label vs. Labeling - Does the insert need to include UDI? Other US Medical Device Regulations 1
SocalSurfer AS9100 new certificate, but need QMS software, help Quality Assurance and Compliance Software Tools and Solutions 2
A Demonstration of Equivalence - Need for comparing biological characteristics for an SamD EU Medical Device Regulations 1
G Need to change KPI we called NC parts (maximum 3%.) to FTQ (first time quality) IATF 16949 - Automotive Quality Systems Standard 4
W Need for current design or process control FMEA and Control Plans 2
L Turkish Requirements - Does the Software need to be translated? CE Marking (Conformité Européene) / CB Scheme 2
J Need for a cleanroom in the manufacture of a medical device for a clinical trial EU Medical Device Regulations 4
S Need help with analysing a survey on minitab Using Minitab Software 1
M IATF 16949 8.5.1.3 Verification of job set-ups - Do we need secondary check? IATF 16949 - Automotive Quality Systems Standard 7
P Electrosurgical Device User Need: Cord Flexibility -> Requirement Other Medical Device and Orthopedic Related Topics 4
P Do I need to get registered or have German entity to sell IVD products in Germany? CE Marking (Conformité Européene) / CB Scheme 2
J Documentation structure - Do I need Work Instructions? Document Control Systems, Procedures, Forms and Templates 23
G Need resources / tutorials about OPS (Operation) for ISO IT (Information Technology) Service Management 8
D Do non-IATF customers need to be included in audit scope? IATF 16949 - Automotive Quality Systems Standard 23
M Do you need an Applicable general safety and performance requirements Checklist? EU Medical Device Regulations 2
Y Does Solidworks (2D/3D drafting modules) need validation? Other Medical Device and Orthopedic Related Topics 5
M Do we need to create a new CER or can we just update the existing CER EU Medical Device Regulations 3
K A proposal for the model Quality Management - I need help for the project ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
B Record Management - Does the QMS need to control templates of records? Records and Data - Quality, Legal and Other Evidence 17
Q Need clarification on requirements.... Class i, gmp & 510(k) exempt Medical Device and FDA Regulations and Standards News 12
U Do we need clinical trial data for Class IIa medical device under MDR EU Medical Device Regulations 7
G Do we need to QA cert? We only plan to supply reagents Medical Device and FDA Regulations and Standards News 3

Similar threads

Top Bottom