New Calibration Laboratory Set Up Measurement Parameters and Equipment

M

masoodabbas

#1
I am Masood from Middle East. Working as a Quality Manager in ISO 17025:2005 accredited test lab.
My company has decided to establish the independent calibration lab. I have that task. I am starting from scratch. Initially we will start with the following
parameters for the calibration.

Electrical Calibration
Force Calibration
Temperature Calibration
Mass & Balance Calibration
Dial Gauge/ Pressure
Length

Needs your support for the equipments to buy for these items.

Masood
 
Elsmar Forum Sponsor

Marc

Fully vaccinated are you?
Staff member
Admin
#2
You will have to be more specific about your measurement parameters and items you want to measure if you want help with this one. The instrument(s) you will need depend upon what you are planning to measure as well is the tolerances and precision required.
 
M

masoodabbas

#3
You will have to be more specific about your measurement parameters and items you want to measure if you want help with this one. The instrument(s) you will need depend upon what you are planning to measure as well is the tolerances and precision required.
Thanks Marc for your assistance. I believe you asked for the below!
Electrical Calibration- 1 milli watt to 1000 kw
Force Calibration-1KN -3000 KN
Temperature Calibration- minus 100 to 1500 degree C
Mass & Balance Calibration- 10 gram to 500 KG
Dial Gauge/ Pressure- 1 miili bar to 1000 Bar
Length-1mm to 10 meter

If possible, refer me from where we can get those standards?
 
Last edited by a moderator:
Thread starter Similar threads Forum Replies Date
L How to set up a basic electronic test equipment calibration laboratory General Measurement Device and Calibration Topics 3
M Calibration Certificate Result issued by an accredited external laboratory General Measurement Device and Calibration Topics 9
Crimpshrine13 Laboratory Scope - Calibration vs. Test Methods - IATF 16949 IATF 16949 - Automotive Quality Systems Standard 3
Casana IATF 16949 7.1.5.3.2 External Laboratory - On Site Calibration IATF 16949 - Automotive Quality Systems Standard 8
N IATF 16949 7.1.5.3.2 External Laboratory - Calibration of Nikon machine in factory IATF 16949 - Automotive Quality Systems Standard 24
Q Calibration laboratory scope - Include software such as Gagetrak or Mini tab used? General Measurement Device and Calibration Topics 3
B IATF 16949 7.1.5.3.2 FAQ #7 Audit Finding - External Calibration Laboratory IATF 16949 - Automotive Quality Systems Standard 7
sswaim IATF 16949 7.1.5.3.2 External Calibration Laboratory Requirelents IATF 16949 - Automotive Quality Systems Standard 15
L How to manage a Metrology Department or Calibration Laboratory General Measurement Device and Calibration Topics 3
J IATF 16949 Calibration Laboratory Scope IATF 16949 - Automotive Quality Systems Standard 22
S Jewelry vs. Normal Laboratory Balances - Accuracy and calibration General Measurement Device and Calibration Topics 2
G Calibration Laboratory Dimensional Temperature Question General Measurement Device and Calibration Topics 2
G ISO 17025 Calibration Laboratory Assessor's Common Questions and Procedures ISO 17025 related Discussions 11
B IATF 16949 - 7.1.5.3.1 Internal calibration laboratory requirements IATF 16949 - Automotive Quality Systems Standard 9
S HVAC Thermostat for Calibration Laboratory General Measurement Device and Calibration Topics 8
S Looking for a Threaded Ring Gage Calibration Laboratory General Measurement Device and Calibration Topics 13
C MU (Measurement Uncertainty) in an Internal Calibration Laboratory Measurement Uncertainty (MU) 1
N Implementing ISO 17025 in a Calibration Laboratory ISO 17025 related Discussions 8
M Calibration and Testing Laboratory Startup Consultation Services General Measurement Device and Calibration Topics 2
M Calibration Laboratory Objectives Achievement Report or Plan Management Review Meetings and related Processes 1
C Should the Calibration Laboratory be kept locked? General Measurement Device and Calibration Topics 6
S Calibration of Laboratory Equipment in accordance with the manufacturer's procedure ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
M ISO17025 Testing Laboratory Equipment Calibration Requirements ISO 17025 related Discussions 4
P ISO 9001 Requirements for ISO 17025 Accredited Calibration Laboratory ISO 17025 related Discussions 5
S Internal Calibration Laboratory Inspection/Approval General Measurement Device and Calibration Topics 3
T Moving a Calibration/Test Laboratory to a new Location General Measurement Device and Calibration Topics 5
S Auditing TS 16949 Cl. 7.6.3.1 - Internal Calibration Laboratory Requirements IATF 16949 - Automotive Quality Systems Standard 8
V For Analytical Laboratory Equipment, is PQ = Calibration Criteria? Qualification and Validation (including 21 CFR Part 11) 2
B Commercial Calibration Laboratory Software Recommendations Calibration and Metrology Software and Hardware 1
S What is the ISO 17025 Certified Laboratory Requirement for External Calibration? ISO 17025 related Discussions 8
R Effects of Calibration Laboratory Temperature on Uncertainty Measurement Uncertainty (MU) 10
D Calibration & Test Laboratory Non-Conformance Procedure Example wanted General Measurement Device and Calibration Topics 3
L Calibration by a non-ISO 17025 Laboratory ISO 17025 related Discussions 4
SATHYABALARAMAN Calibration Laboratory Temperature of 20?C ?1? C & Laboratory Personnel General Measurement Device and Calibration Topics 7
SATHYABALARAMAN Calibration Laboratory vs. Standards Lab Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
drgnrider Calibration Schedule (Frequency) not properly reflected on Laboratory Paperwork Calibration Frequency (Interval) 7
K Expanding a Laboratory Calibration Scope General Measurement Device and Calibration Topics 3
S Evidence of Contract Review for External Calibration Laboratory Contract Review Process 7
T Outsourcing Calibration - NIST, OEM, and Calibration Laboratory General Measurement Device and Calibration Topics 2
W EMF (Electromagnetic Field) in the Calibration Laboratory General Measurement Device and Calibration Topics 9
S Instrument Calibration Laboratory setup for API Pharmaceutical Company General Measurement Device and Calibration Topics 1
T Calibration Laboratory Temperature/Humidity goes out of tolerance due to Power Loss General Measurement Device and Calibration Topics 9
L Selection Requirements for Non-Manufacturer Calibration Laboratory General Measurement Device and Calibration Topics 4
K Survey Meter Calibration - Accredited Laboratory required? General Measurement Device and Calibration Topics 5
A Uncertainty of Measurement for Calibration Laboratory? Measurement Uncertainty (MU) 8
6 Fuel Testing Laboratory Test Equipment - Methods and Calibration General Measurement Device and Calibration Topics 2
A Need to Audit an External Calibration Laboratory? - Customer Audit Finding Other Medical Device Regulations World-Wide 5
D ISO 17025 and Calibration Laboratory Risk Management Requirements ISO 17025 related Discussions 1
B Can I use a Laboratory CMM for Gauge Calibration General Measurement Device and Calibration Topics 11
K Starting a new Calibration and Repair Laboratory General Measurement Device and Calibration Topics 15

Similar threads

Top Bottom