New Process, New Equipment Aspects and Impacts Environmental Evaluation

pmwong

Involved - Posts
#1
Hi,

Do any of you had carried out any environmental aspect and impact evaluation before a new process were introduce or a new equipment were to purchase. If yes, would appreciate some help what are the items that we were need to be included to be evaluated as aspect and impact.

Example, if there is plans to purchase a "cleanroom', what are the items that should be included in the checklist to evaluate the aspect and impact.

examples or samples of evaluation carry out in the form of a checksheet is most welcome.

Thanks
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration
Staff member
Admin
#2
To start out, I suggest you go to the main forum Search page and put in these key words: aspect* impact* (with the * wild card character). To narrow your results, toggle the Search Thread Titles Only 'drop down' menu.



Also check out the existing Aspect and Impact file attachments.
 
Thread starter Similar threads Forum Replies Date
K Problems with process equipment ISO 13485:2016 - Medical Device Quality Management Systems 4
P Design verification driven by new equipment. How is this different than process validation? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
E Equipment Qualification - IQ/OQ per ISO 13485:2016 section 7.5.6 Process validation ISO 13485:2016 - Medical Device Quality Management Systems 7
N Validation procedure, Major NC CAP - Equipment Validation process is not effective ISO 13485:2016 - Medical Device Quality Management Systems 5
R Calibration of processing equipment - 21 CFR 820.70 Production and process controls 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
C Software Planning Tool for Equipment Qualifications, Process Validations Software Quality Assurance 3
Marc Medical Equipment Inmetro Certification Process in Brazil - Part 2 Other Medical Device Regulations World-Wide 3
C Gage R&R on In-Process Automated Inspection Equipment Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 13
R Identification of Key Process Equipment IATF 16949 - Automotive Quality Systems Standard 7
A Comparing Effect of Process Parameters on Equipment Performance during Start Ups Statistical Analysis Tools, Techniques and SPC 3
D How to determine Equipment Tolerance Variation - Product vs. Process Tolerance General Measurement Device and Calibration Topics 7
M Medical Equipment Inmetro Certification Process in Brazil - Part 1 Other Medical Device Regulations World-Wide 47
R Process Qualification, Equipment Qualification, Operator Qualification - Sequence? Manufacturing and Related Processes 10
M Process Validation and Qualification of Legacy Equipment ISO 13485:2016 - Medical Device Quality Management Systems 10
M Process Validation/Equipment Qualification - Class 1A (Sterile) Medical Device ISO 13485:2016 - Medical Device Quality Management Systems 12
D Process Equipment and Supporting Service ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
C Process Equipment Spare Parts Vendors - Evaluation and selection of suppliers - 7.4.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
D CSA Inspection - Process equipment shipped elsewhere to process product Various Other Specifications, Standards, and related Requirements 9
R Equipment Change or Process Change? Validation protocol for a planar freezer Misc. Quality Assurance and Business Systems Related Topics 3
I Periodic Review of Process and Equipment Validation Qualification and Validation (including 21 CFR Part 11) 4
Y Process FMEA (PFMEA) vs. Equipment FMEA (EFMEA) Differences FMEA and Control Plans 15
Ajit Basrur Necessity of Calibration of Manufacturing Process Equipment Gages, Controllers, Etc. General Measurement Device and Calibration Topics 7
D Is the Equipment for Measuring Process Parameters covered by ISO9001? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
I ATE (Automatic Test Equipment) "Gage" process for electronic modules? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
Y How can we do MSA (Measurement Systems Analysis) for Chemical Process Equipment? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
M Do we need to calibrate gauges on process equipment? General Measurement Device and Calibration Topics 18
M Seeking guidance documents for Non FDA Regulated Process Validation - New Equipment Statistical Analysis Tools, Techniques and SPC 3
Q Validation of New Process Equipment - What are the ISO 9001 requirements? Misc. Quality Assurance and Business Systems Related Topics 6
M Definition Key Process Equipment (KPE) - Some criteria and / or a good definition Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 4
Pau Calvo Quality Management process is mandatory in ISO9001? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
Tagin Template or Checklist for Process Change Document Control Systems, Procedures, Forms and Templates 4
LostLouie Manufacturer divorced from Design process, is he justified in design process deficiencies? ISO 13485:2016 - Medical Device Quality Management Systems 3
J 1.11 Preliminary Identification of Special Product and Process Characteristics APQP and PPAP 4
D Question regarding customer feedback process ISO 13485:2016 - Medical Device Quality Management Systems 3
T What does AS9100 mean when it says you must establish a process to do X? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 24
J Process FMEA Template with examples - Cold and Hot Forged components FMEA and Control Plans 4
D Questions regarding process validation ISO 13485:2016 - Medical Device Quality Management Systems 6
D Question regarding ECO process, specifically for Life Science products and defining form fit and function ISO 13485:2016 - Medical Device Quality Management Systems 1
P Managing How PPAP Requirements are Communicated in the Manufacturing Process and to Suppliers APQP and PPAP 5
I Control Plan (Product/Process specification/ Tolerance) acceptance FMEA and Control Plans 27
L Process changes and biocompatibility (ISO 10993-1) Other Medical Device Related Standards 1
A Validation of Forced Aeration Process ISO 13485:2016 - Medical Device Quality Management Systems 3
R Error Proofing Label process Manufacturing and Related Processes 4
B New Release of CQI-12 Coatings Process (Revision 3- Release date- 7/2020) Customer and Company Specific Requirements 2
D Layered Process Audits - FCA 9.2.2 - Exemption Clause? IATF 16949 - Automotive Quality Systems Standard 5
B ISO 11607-2 "Critical Parameter" vs. "Process Parameter" Other Medical Device Related Standards 3
Q Example Process orientation to the process leadership, management, goals (tasks of the top management) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
S Process Inspection -Sub assembly process inspection sheet Lean in Manufacturing and Service Industries 3
T ISO 13485 8.3 - Non-Conforming Materials - on-line rework or part of process? ISO 13485:2016 - Medical Device Quality Management Systems 11
T Outsourced process in ISO 45001 Occupational Health & Safety Management Standards 2

Similar threads

Top Bottom