NPI (New Product Introduction) Process Qualification System Required

Y

Yew Jin

#1
Hi guys,

Normally we are doing the product qualification for the new model in the organization but we do not really look into the process itself.

We plan to develop a process qualification to identify the critical process and improvement actions for the new product introduction in the organization.

Where can I find the approach on the way to develop, what model can I benchmark on the quantity for the qualification, characteristics, criteria for the measurement?:truce:
 
Elsmar Forum Sponsor

Ajit Basrur

Staff member
Admin
#3
Re: NPI Process Qualification System Required

Whats the type of industry you are looking for NPI ?

My main role is with medical devices and we handle NPI through a Program Management software. There are different steps that we follow through like -

1. Concept Finalisation
2. Programme Planning
3. Documentation (like Specifications, Customer documents etc.)
4. Qualification (Equipment Qualification, Fixtures Qualification etc.)
5. Validation (Molding Validation, Painting Validation and Assembly Validation)
6. Mass Production

Hope this helps
 

michellemmm

Quest For Quality
#4
Re: NPI Process Qualification System Required

Whats the type of industry you are looking for NPI ?

My main role is with medical devices and we handle NPI through a Program Management software. There are different steps that we follow through like -

1. Concept Finalisation
2. Programme Planning
3. Documentation (like Specifications, Customer documents etc.)
4. Qualification (Equipment Qualification, Fixtures Qualification etc.)
5. Validation (Molding Validation, Painting Validation and Assembly Validation)
6. Mass Production

Hope this helps
Thanks:thanks:

Very similar (Almost identical) to C0 ~C6...
 

Paul Simpson

Trusted Information Resource
#5
Hi guys,

Normally we are doing the product qualification for the new model in the organization but we do not really look into the process itself.

We plan to develop a process qualification to identify the critical process and improvement actions for the new product introduction in the organization.

Where can I find the approach on the way to develop, what model can I benchmark on the quantity for the qualification, characteristics, criteria for the measurement?:truce:
You could do worse than look at the APQP process used in the automotive industry. Take a look at the TS 16949 thread here or have a search for APQP. It is a simple phased approach to NPI.
 
Y

Yew Jin

#6
We are doing some electronics part in the industry.

We are facing the problem that when a new product which initial buy off in small sample size having the pretty result or desire outcome.

But when launch to the mass production, terrible results will give everybody nightmare.

So, our intend right now is to think how we can have the effective and a good plan on how to qualify every single new product introduction such as how is the intial yield, tooling readiness, initial process capability, machine up time......
 

Paul Simpson

Trusted Information Resource
#7
We are doing some electronics part in the industry.

We are facing the problem that when a new product which initial buy off in small sample size having the pretty result or desire outcome.

But when launch to the mass production, terrible results will give everybody nightmare.

So, our intend right now is to think how we can have the effective and a good plan on how to qualify every single new product introduction such as how is the intial yield, tooling readiness, initial process capability, machine up time......
I'll refer you back to APQP. The phases cover all aspects of process qualification and sign off of demonstrated capability.
 
S

Sushma

#9
Re: NPI (New Product Introduction) in EMS..let's discuss

Hello Seniors, :bigwave:

I am new to this site I find that this is very intresting place for knowledge gaining and aswell sharing. I am here with my first post...New product introduction in electronics manufaturing industries. I am wondering about listening different concepts for different companies, trying to know the most common...:confused:please help

How you justify NPI in your organisation under what kind of roles and responsibilties and what kind of reporting structure in different cases?

How do you differentiate New Product Introduction and New Product Implimentation, who should handle it...

So many questions, hoping many replies too:read:

Regards
 
Thread starter Similar threads Forum Replies Date
S New Product Introduction Procedure - NPI Document Control Systems, Procedures, Forms and Templates 1
K NPI (New Product Introduction) Quality Plan Outsourced Manufacturer/Supplier APQP and PPAP 3
T Raw Parts Inspections for NPI (New Product Introduction) Phase Supplier Quality Assurance and other Supplier Issues 1
S Monozukuri Rules for NPI (New product Introduction) - Help to get Lean in Manufacturing and Service Industries 3
Q Procedure for New Product Introduction (NPI) - Build to print shop Various Other Specifications, Standards, and related Requirements 6
S NPI (New Product Introduction) in Electronics Industries Document Control Systems, Procedures, Forms and Templates 10
C Definition NPI (New Product Introduction) Readiness - Definition Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 9
Q Internal Program audit Scope for NPI 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
M Excel Templates for Plan & Define Phase in NPI Process for Tire Manufacturer Excel .xls Spreadsheet Templates and Tools 1
N Have any different between NPI and APQP ? APQP and PPAP 1
K Definition NPI, PPCR, QFD, NCR, DOE - Abbreviations Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
H Medical device Product Registration Registrars and Notified Bodies 2
A Can a power Supply be an accessory to a medical device, if it is an 'off-the-shelf' product. IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
M Extension to shelf life of new product under MDR EU Medical Device Regulations 1
lanley liao Are there guidelines for application of all API monogrammal product? Oil and Gas Industry Standards and Regulations 2
S ISO 11137- Simulated product vs SIP Other Medical Device Related Standards 2
K "World Class Product" based QM. I need advice. Quality Management System (QMS) Manuals 14
R IATF 16949 Certification for new site with transferred product--what is the impact with CSR and scorecards? IATF 16949 - Automotive Quality Systems Standard 0
William55401 Distributed By Product - Best Practices for Configuration Management and Purchasing Controls ISO 13485:2016 - Medical Device Quality Management Systems 0
R Compatibility studies - combination product CE Marking (Conformité Européene) / CB Scheme 4
R Compatibility studies - Medicinal Product and Medical Device Other ISO and International Standards and European Regulations 0
J Marking "Distributed By" to product with distributors' reference-code EU Medical Device Regulations 3
dinaroxentool Selling a product in Both UK and EU after Brexit UK Medical Device Regulations 8
P EU MDR Translation of Product Name EU Medical Device Regulations 0
N Is this a single integral drug device combination product EU MDR CE Marking (Conformité Européene) / CB Scheme 1
V New Product Model CE Mark Certification under MDR EU Medical Device Regulations 0
Sidney Vianna Informational APQP4Wind - Advanced Product Quality Planning for the Wind Power Supply Chain APQP and PPAP 3
K 510k FDA review, will they accept Biocompatibility result generated using feasibility product lots? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
G Adopting old product - compliance with IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 9
S How long does it take to register a product with MHRA? UK Medical Device Regulations 3
D Classification of product for clinical trials EU Medical Device Regulations 14
N Adding unclassified product to the medical device registration US Food and Drug Administration (FDA) 1
B Internal Auditor Competency - Product Auditors Internal Auditing 9
T PFMEA and Control Plans on legacy product FMEA and Control Plans 5
P FDA Approved Product Contact Parts ISO 13485:2016 - Medical Device Quality Management Systems 6
S AS9120B - 8.5.2 Delivering Split Product AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
S Classification of a product according to MDR EU Medical Device Regulations 3
optomist1 Informational Training IMDS - Management of Product Chemical Regulatory Compliance RoHS, REACH, ELV, IMDS and Restricted Substances 2
L AS9100 - Product and Service Provision 8.5.1q AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
J 1.11 Preliminary Identification of Special Product and Process Characteristics APQP and PPAP 4
J Possible to get ISO 13485 certified with only OEM Product? ISO 13485:2016 - Medical Device Quality Management Systems 4
Felony Melony New Product Launch - Safe Launch Customer and Company Specific Requirements 1
Marcel DS How do I know if my product is required be RoHS certified? REACH and RoHS Conversations 6
I Control Plan (Product/Process specification/ Tolerance) acceptance FMEA and Control Plans 27
DuncanGibbons Technical Data Package vs Digital Product Definition APQP and PPAP 0
A ISO 11135:2014, B.1.4, BI resistance x product bioburden ISO 13485:2016 - Medical Device Quality Management Systems 6
Sravan Manchikanti How to interpret '8.3 Control of nonconforming product' for SaMD device while implementing ISO 13485 & MDSAP ISO 13485:2016 - Medical Device Quality Management Systems 7
R Product Recall - medical devices in the hospital warehouse Canada Medical Device Regulations 2
A Software bug fixes after shipping a product EU Medical Device Regulations 3
silentmonkey How to measure severity if my product is designed for emergency use and failure would result in death? ISO 14971 - Medical Device Risk Management 9

Similar threads

Top Bottom