Packaging Standard - Corrugated Box and Materials as well as Pallets

kedarg6500

Quite Involved in Discussions
#1
Dear Folks

I need help. I want to know standard for
1. Inspecting quality of corrugated packing box, edge boards
2. Pallet - wooden, plastic made
3. Testing standard
4. Consumable standard/ inspection method: strapping/wrapping material
5. Storing of corrugated material
6. Guidelines for manufacturer’s raw material (pasting glue, board GSM)
7. Guidelines for corrugated packing box material
Thank you in advance
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
Dear Folks

I need help. I want to know standard for

1. Inspecting quality of corrugated packing box, edge boards
2. Pallet - wooden, plastic made
3. Testing standard
4. Consumable standard/ inspection method: strapping/wrapping material
5. Storing of corrugated material
6. Guidelines for manufacturer’s raw material (pasting glue, board GSM)
7. Guidelines for corrugated packing box material

Thank you in advance
Can someone help Kedar?

Thank you very much!

Stijloor.
 
T

tomvehoski

#3
It's been forever since I dealt with packaging (corrugated), but you should be able to find plenty of international standards on these topics by searching the ISO website. (iso.org). ASTM.org would be second source. I know we used to do corner drop, shake table, and other tests on consumer packaged goods.

You may want to search for a qualified packaging engineer nearby to review what you are looking at. Your topics are very broad and probably need on-site review that would be difficult over the internet.
 
T

tamale

#4

kedarg6500

Quite Involved in Discussions
#5
You may want to contact the International Corrugated Case Association at:

http://www.iccanet.org/

or the Association of Independent Corrugated Converters at:

http://www.aiccbox.org/

Or the Corrugated Packaging Alliance at:

http://www.corrugated.org/

Or the Asia Corrugated Case Association at:

http://www.acca-website.org/

Or just Google «corrugated association» and you will find plenty of references.

Tamale
I am trying to get information,but I want to know how to conduct "Testing and Evaluation of Corrugated Packaging"
1. At Receipt Inspection stage
2. What are the Type Test to be conducted
3. How to validate the Packaging
4. How to conduct Transport-worthiness test for Corrugated Packaging

Kedar
 
T

TravisM

#6
Hi,

Have you looked at the ISTA procedures and testing guidelines?

You can find them at ISTA.org

I'm new here, so can't post links yet, but google can point you in the right direction.

Hope that this can help in some way.

Regards,
Travis
 
F

FrankGatlin

#7
Keydarg6500,

Perhaps this Blog will shed some light on your questions:
floridashippingandpackaging.com/mullen_and_ect_testing/

While there is limited information on every detail of your request, it may be a good place to start.

Good luck on your quest.
 
Thread starter Similar threads Forum Replies Date
J BRC Packaging and Packaging Materials Standard Training Food Safety - ISO 22000, HACCP (21 CFR 120) 2
C Packaging & Labeling Standard Operation Procedure 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
A BRC (British Retail Consortium) Global Standard For Packaging Material Various Other Specifications, Standards, and related Requirements 1
E Reference Standard for Shelf Life Testing of Packaging for Sterilized Medical Device Other US Medical Device Regulations 3
F MIL-STD-2073-1, Standard Practice for (US) Military Packaging Various Other Specifications, Standards, and related Requirements 0
D Standard defining Debris Type (Hairs, Particles, Fibers) in Sterile Packaging Other ISO and International Standards and European Regulations 4
M Packaging standards - ASTM vs ISTA Other Medical Device Related Standards 0
M Packaging studies - ISTA vs ASTM CE Marking (Conformité Européene) / CB Scheme 0
F UDI-PI required on packaging (MDR) EU Medical Device Regulations 2
C Packaging Long Parts Manufacturing and Related Processes 3
H Software Validation for FFS Packaging Machine Qualification and Validation (including 21 CFR Part 11) 1
G Special 510K possible? Only the packaging has changed Other US Medical Device Regulations 0
B Setting flexible packaging specification limits ISO 14971 - Medical Device Risk Management 4
V Packaging in Distributor Practices EU Medical Device Regulations 0
R Green dot required on packaging? Medical Device and FDA Regulations and Standards News 2
shimonv Single lot release for sterile packaging 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
R Applicable ISO standards - packaging and others Medical Device and FDA Regulations and Standards News 4
A FDA guidance on non-sterile Medical Device Packaging Medical Device and FDA Regulations and Standards News 7
C 21 CFR 803 malfunction detected during packaging - report? Other US Medical Device Regulations 1
E Latex in packaging Other Medical Device Related Standards 4
H Expired packaging material - Expired unused Tyvek pouches Other Medical Device and Orthopedic Related Topics 2
A GUDID - Packaging Levels 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
A Packaging device with accessories already on the market Other Medical Device Regulations World-Wide 0
P Unrealistic Packaging Validation Sample Size 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 39
T Root Cause Failure Analysis - Not following Customer packaging Specification Problem Solving, Root Cause Fault and Failure Analysis 9
Q EU Rep for Packaging waste, WEEE and Battery disposal CE Marking (Conformité Européene) / CB Scheme 0
L AS5553 Clause 3.1.7 e "Control packaging material ..................reused" AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
L Packaging unsterile medical devices ISO 13485:2016 - Medical Device Quality Management Systems 6
M MDR - Packaging - Secondary Medical Device Boxes EU Medical Device Regulations 2
Y Packaging validation for non-sterile Medical Equipment Other Medical Device Related Standards 1
M UDI size on packaging EU Medical Device Regulations 3
M UDI placement - Packaging levels EU Medical Device Regulations 2
E Unit Dose Packaging Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0
K Packaging and Damaged Parts returned from a Service Provider (Anodize) - Who is Responsible? Manufacturing and Related Processes 20
B 510(k) clearance claim on medical device product packaging Other US Medical Device Regulations 6
E Packaging Specifications Mercedes-Benz U.S. International IATF 16949 - Automotive Quality Systems Standard 4
T Colour of symbols on Medical Device labelling and packaging Other Medical Device Related Standards 1
R Labels on sterile packaging EU Medical Device Regulations 5
A Interpretation of Article 16 (2b) - Packaging, samples and Certificate EU Medical Device Regulations 10
I Medical Device Packaging Multilingual Labeling EU Medical Device Regulations 3
N Process Flow diagram steps for inspection and packaging APQP and PPAP 4
C ISO 7010 m002 mandatory action - Color requirements on Packaging IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
shimonv GTIN Number on the Packaging of a Serviced Medical Device EU Medical Device Regulations 0
shimonv Is UDI required on the Packaging of a Serviced/Repaired Medical Device? Other US Medical Device Regulations 3
C QR Code on Medical Device Packaging and Notification to Notified Body EU Medical Device Regulations 1
TheMightyWife Address Change - Medical Device Packaging Labelling Requirements EU Medical Device Regulations 7
E Use of FDA Cleared logo on packaging US Food and Drug Administration (FDA) 8
V Tyvek packaging for Medical device process validation Qualification and Validation (including 21 CFR Part 11) 2
S Symbols - Device label versus Packaging label ISO 13485:2016 - Medical Device Quality Management Systems 1
Y Sterile device packaging under MDR EU Medical Device Regulations 3

Similar threads

Top Bottom