PAD printing and meeting regulatory requirements

#1
Wondering if anyone, outside medical, has any experience with PAD printing on a finished good and required regulatory information. Trying to explore options and possible roadblocks.
Greatly appreciate your insight.
 
Elsmar Forum Sponsor

ScottK

Not out of the crisis
Leader
Super Moderator
#6
so using pad printing for the actual marks, like the UL symbol, on the part? I don't see an issue as long as you verify/validate that it won't come off without serious effort (i.e. during normal use over it's lifetime) and that it's legible.
Are you looking to outsource or do in-house? If you outsource, your supplier should be able to guide you to the right ink for your application.
 

ScottK

Not out of the crisis
Leader
Super Moderator
#8
Then your ink supplier should be able to recommend the right ink for the job and I'd probably do periodic adhesion testing to the appropriate ASTM standard. Maybe do an accelerated aging test to validate the process.
 
Thread starter Similar threads Forum Replies Date
G Pad Printing Validation OR Verification ISO 13485:2016 - Medical Device Quality Management Systems 4
C Advise on Oral Spray Pad Printing and Compliance 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
Ajit Basrur Pad Printing Ink Requirements for pad printed medical device ISO 13485:2016 - Medical Device Quality Management Systems 4
XRAY_3121 Class II heating pad - does the power supply have to have IEC 60601-1 testing?? US Medical Device Regulations 5
Wes Bucey Touch Pad on Laptop - Make Me Smart After Work and Weekend Discussion Topics 6
S Transitional Test Data Records - Scratch Pad to Data Entry Document Control Systems, Procedures, Forms and Templates 2
K How to control SMT pad/trace damage and how to determine root cause? Problem Solving, Root Cause Fault and Failure Analysis 1
N Where to buy non-slip pad or material or non slip balancing machine Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
D Evaluating the printing label Supplier Quality Assurance and other Supplier Issues 8
T 211, subpart B, section 211.22 as it applies to pharma printing Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 3
K Screen printing ink and machine selection_ Need help Manufacturing and Related Processes 6
B AS9102 - 3D printing a special tool required for assembly (counterfeit risk?) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 12
M Label Making & Printing Standards ISO / ASTM ISO 13485:2016 - Medical Device Quality Management Systems 7
JAMESH Adobe Acrobat-Pro Unflattened Markups not printing Document Control Systems, Procedures, Forms and Templates 2
G Batch printing reports in Minitab Using Minitab Software 3
M Informational Health Canada – Guidance Document: Supporting Evidence for Implantable Medical Devices Manufactured by 3D Printing Medical Device and FDA Regulations and Standards News 0
DuncanGibbons Additive Manufacturing/3D printing for aerospace (certification procedure) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
Y Excel Automation - Printing Word Documents from within Excel Excel .xls Spreadsheet Templates and Tools 0
R FDA Requirements - Printing Equipment Software Validation Qualification and Validation (including 21 CFR Part 11) 1
Z Tablet Printing Technologies (NON-3D) Manufacturing and Related Processes 2
Pmarszal Label Printing: Medical Device related UDI Requirements - GUDID Aspects Other US Medical Device Regulations 0
A 3D Printing concept in airline to manufacture its own aircraft cabin parts EASA and JAA Aviation Standards and Requirements 3
smryan Excel Printing Glitch - How to STOP Printing One Cell per Page Excel .xls Spreadsheet Templates and Tools 10
T Printing a single Page from a Quality Manual Document Control Systems, Procedures, Forms and Templates 3
L Specific Question about Printing Controlled Documents. ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
Wes Bucey A "Feel Good" story - 3D Printing Creates Low-Cost Prosthetic Fingers Coffee Break and Water Cooler Discussions 0
T Quality Manual Pagination and Printing Document Control Systems, Procedures, Forms and Templates 8
L Printing Machine Make Ready Rapid Changeover Case Study Lean in Manufacturing and Service Industries 2
C Is this GR&R method valid? (Printing Company) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
F Need advise on Root Cause analysis for printing issue Problem Solving, Root Cause Fault and Failure Analysis 3
S Questions about 3D Printing Manufacturing and Related Processes 10
W The 2nd printing of the AWS D17.1 2010 which was 2011 - Page missing? Various Other Specifications, Standards, and related Requirements 3
Marc The future of 3-D Printing Manufacturing and Related Processes 18
C Constructing an AQL matrix for our QC operators in a flexographic printing outfit AQL - Acceptable Quality Level 4
M FDA Submission Printing Format - Is double sided printing allowed? Other US Medical Device Regulations 5
A ISO 14001 & Waste Packaging Regulations - Printing Plate Production Company ISO 14001:2015 Specific Discussions 1
G Multi Language Instructions - Standard for Type Size when Printing Instructions? Other ISO and International Standards and European Regulations 2
A Validation of Process - Label Printing and Cable Marking IATF 16949 - Automotive Quality Systems Standard 4
F ISO 9001 Quality Management System for Printing Press ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
S Electronic Document Printing Restrictions and Access Control Document Control Systems, Procedures, Forms and Templates 4
C Printing ISO 9001:2008 vs. ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
R Need help on printing report in Camio (CMM software) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
W Is it Legal for Printing CE Mark in Label? FDA Aspect 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 22
N Measurable Targets and Objectives - Envelope Printing Company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
A EA Code 9 (printing) as it relates to 13485 ISO 13485:2016 - Medical Device Quality Management Systems 1
P Plastic printing packaging company - ISO 9001:2008 Clause 7.6 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
S Advice Please regarding CE Marking requirements for Printing Press CE Marking (Conformité Européene) / CB Scheme 4
Y Offset Printing Quality Plan Template Quality Tools, Improvement and Analysis 4
P Access to, and Printing of, Controlled Documents Document Control Systems, Procedures, Forms and Templates 7
P Process Map for Offset Printing Process Maps, Process Mapping and Turtle Diagrams 2

Similar threads

Top Bottom