Performance Qualification For Destructive Testing (Impact Testing)

A

ash500

#1
Hello out there,

I am wondering if anyone can help me? I am looking to write a performance qualification for an impact testing we've recently had installed.

Previous validations prior to the qualification era have compare results to historical data, but we are wondering if there is another approach to the performance qualification for destructive testing.

Look forward to hearing from you
Ash

:confused:
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
Hello out there,

I am wondering if anyone can help me? I am looking to write a performance qualification for an impact testing we've recently had installed.

Previous validations prior to the qualification era have compare results to historical data, but we are wondering if there is another approach to the performance qualification for destructive testing.

Look forward to hearing from you
Ash

:confused:
Can someone help?

Thank you!

Stijloor.
 
J

Juan Dude

#3
It's hard to understand what exactly you are trying to achieve with the information provided.
 
G

George Weiss

#4
Greetings,
There are numerous standards for drop-testing, vibrating, shake-rattle-role, and etc. of shipping boxes,
and of the devices themselves.
Applying these standard methods is common, and benificial, and sometimes required.
Medical devices for sure have numerous ENV test expectations.
There are USA MIL-STD ENV testing methods also.
The MIL-STDs are free, and available on line from everyspec.com, and others.
ISO/IEC have some specific standards for striking items.
IEC60068-2-75 with a pendulum fixture and specifics on the striking hammer. all good stuff!
They lay out specifics of force, and type of striking device etc.
These would likely give you the destructive/damage testing your asking about.
Is there a particular test you want to run or develop? :bigwave:
The/your device, your local, and test spec would advance better answer(s)
 
Last edited by a moderator:
A

ash500

#5
Hi,

Thanks for your response. I was looking for another method for validation an impact tester for plastics testing rather than round robins. There used to be set pieces available for testing accuracy and reliablity, but these seem to have been discontinued. Looks like round robin is the way it'll have to be.

Thanks
Ash
 
Thread starter Similar threads Forum Replies Date
D Performance Qualification per GHTF Guidance Other Medical Device Related Standards 12
H How to prepare Performance Qualification (PQ) for autoclave General Measurement Device and Calibration Topics 2
O Clean room performance qualification (pq) - How many times can I do each test? Manufacturing and Related Processes 8
D What should an ISO 14644 Clean Room PQ (Performance Qualification) look like? Manufacturing and Related Processes 3
L MSA - Stability - Part of our PQ (performance qualification) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
P Performance Qualification of old Rapid Mixer Granulator Qualification and Validation (including 21 CFR Part 11) 2
R Performance Qualification on a Table Top Centrifuge ISO 13485:2016 - Medical Device Quality Management Systems 3
B Dispenser PQ (Performance Qualification) Failure Quality Manager and Management Related Issues 4
G Sampling Plan for a Performance Qualification of an Inflation System Qualification and Validation (including 21 CFR Part 11) 2
S Barcode Scanner IOPQ (Installation/Operational/Performance Qualification) Requirement Qualification and Validation (including 21 CFR Part 11) 9
T New Packaging Line Performance Qualification (PQ) - Minimum Test Times ? Qualification and Validation (including 21 CFR Part 11) 3
B Performance Qualification Question - Downsizing the end of a tube Quality Tools, Improvement and Analysis 5
P Process or Performance Qualification Requirements Qualification and Validation (including 21 CFR Part 11) 5
S Performance Qualification: GHTF PQ vs. FDA PPQ 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
W IQ, OQ, PQ (installation, operational & performance qualification) compared to PPAP ISO 13485:2016 - Medical Device Quality Management Systems 5
H Basic questions about Installation, Operational & Performance Qualification - PCBA Qualification and Validation (including 21 CFR Part 11) 11
C Generate IQ, OQ & PQ (installation/operational/performance qualification) Report Document Control Systems, Procedures, Forms and Templates 11
W IEC 60601 - Essential performance c.2.34 IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
S A clinical performance evaluation study with an IVD product as Investagional Use product - Clinical Monitor requirements 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
D Performance of high shear mixer (or rapid mixing granulator Qualification and Validation (including 21 CFR Part 11) 4
M Do you need an Applicable general safety and performance requirements Checklist? EU Medical Device Regulations 2
D Performance specification as a Risk Control Measure, EN 14971 ISO 14971 - Medical Device Risk Management 7
G Defining performance metrics for DFMA implementation Design and Development of Products and Processes 2
B Four Key Performance Indicators for Continual Improvement (Dec. 3 2019) [Deleted] Training - Internal, External, Online and Distance Learning 2
F 5520A High Performance Multi-Product Calibrators General Measurement Device and Calibration Topics 0
shimonv IEC 60601-1 Essential Performance - Is the signal accuracy specification an essential requirement? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
M Informational US FDA Final Guidance – Coronary, Peripheral, and Neurovascular Guidewires – Performance Tests and Recommended Labeling Medical Device and FDA Regulations and Standards News 0
O Performance Measurement ISO 9001: 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
O Monitoring performance - How do I determine performance measurement basis within my organization? Misc. Quality Assurance and Business Systems Related Topics 4
M Informational MDCG 2019-9 Summary of safety and clinical performance A guide for manufacturers and notified bodies – August 2019 Medical Device and FDA Regulations and Standards News 0
M Informational Several US FDA draft guidances, including some specific device guidances for the Safety and Performance Based Pathway Medical Device and FDA Regulations and Standards News 0
M Informational USFDA final guidance – Safety and Performance Based Pathway Medical Device and FDA Regulations and Standards News 0
M Performance Standard for Balloon Trocars Other Medical Device Related Standards 2
M Informational TGA Consultation: Proposed changes to medical device essential principles for safety and performance Medical Device and FDA Regulations and Standards News 0
rezayatmand IEC 60601-2-18 Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipmen IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
Q Ineffective follow up of people performance - Audit Nonconformance ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
P Is there a counterpart to the General Safety and Performance Regulations for the USA? Other US Medical Device Regulations 2
D Summary of safety and clinical performance in GSPR MDR EU Medical Device Regulations 2
M Informational EU draft act – Single-use medical devices – safety and performance requirements for reprocessing Medical Device and FDA Regulations and Standards News 0
B Essential Performance of a Cone Beam Computed Tomography Device IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
M Informational USFDA final guidance – Recommended Content and Format of Non-Clinical Bench Performance Testing Information in Premarket Submissions Medical Device and FDA Regulations and Standards News 0
M Informational USFDA draft guidance – Technical Performance Assessment of Quantitative Imaging in Device Premarket Submissions Medical Device and FDA Regulations and Standards News 0
M Informational USFDA – Radiological Health Regulations; Amendments to Records and Reports for Radiation Emitting Electronic Products; Amendments to Performance Stand Medical Device and FDA Regulations and Standards News 0
M Characterization Testing - NO acceptance criteria, no minimum performance requirement Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
D IEC 60601-1 - Essential performance doesn't make sense IEC 60601 - Medical Electrical Equipment Safety Standards Series 10
M Product Performance Claims Other Medical Device Related Standards 4
P Performance evaluation (IVDD Annex VIII) & Design and Development Validation Studies EU Medical Device Regulations 1
C How frequent to conduct Clinical / Performance Evaluation? CE Marking (Conformité Européene) / CB Scheme 4
M Informational USFDA Final Guidance – Safety and Performance Based Pathway Medical Device and FDA Regulations and Standards News 2
M FDA News USFDA – Safety and Performance Based Pathway Guidance Medical Device and FDA Regulations and Standards News 0
Similar threads


















































Top Bottom