Position of Quality Manager - Can the organization's Quality Lead be shown as Quality Manager of the lab as well?

fahimk

Involved In Discussions
#1
In ISO 17025 a calibration laboratory needs to have a dedicated Quality Manager. In case the parent organization is ISO 9001 certified, can the organization's Quality Lead be shown as Quality Manager of the lab as well?
Thanks
 
Elsmar Forum Sponsor

Gus

Starting to get Involved
#4
Yes, its best to have it be the same when belonging to a bigger organization, this also helps with internal audit coordination
 

qualprod

Trusted Information Resource
#5
In ISO 17025 a calibration laboratory needs to have a dedicated Quality Manager. In case the parent organization is ISO 9001 certified, can the organization's Quality Lead be shown as Quality Manager of the lab as well?
Thanks
Yes, one person can be responsible of several processes.
 

dwperron

Trusted Information Resource
#6
In ISO 17025 a calibration laboratory needs to have a dedicated Quality Manager. In case the parent organization is ISO 9001 certified, can the organization's Quality Lead be shown as Quality Manager of the lab as well?
Thanks
The old ISO 17025:2005 required that the lab have "a member of staff as quality manager (however named)". The current 2017 version no longer requires the position, instead it reads "5.2 The laboratory shall identify management that has overall responsibility for the laboratory." If you designate someone as quality manager, that's fine, but not required.
 
Thread starter Similar threads Forum Replies Date
CCaantley Stepping Down from my quality manager position soon After Work and Weekend Discussion Topics 18
A Shall I apply for this job position (Quality Manager)? Career and Occupation Discussions 5
M Looking for a Mentor - Moved from an IT position to Quality Manager position Career and Occupation Discussions 5
H Quality Employee "Step Plan" for Quality Manager Position Career and Occupation Discussions 1
T Question about Quality Department employee position titles Quality Manager and Management Related Issues 7
D Just starting out looking to get into a quality engineer position Career and Occupation Discussions 2
optomist1 Interview Preparation for Quality Supervisory Position - TS16949 Environment Career and Occupation Discussions 24
sridharafep Appointing A Quality Inspector Or Lower Position Employee As Management Rep ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
K What is the entry level position/job in the field of Quality? Career and Occupation Discussions 14
N Shifting from Development Team to a Quality Assurance Position Career and Occupation Discussions 4
H Second Quality Engineer Position Interview - What should I brush up on? Career and Occupation Discussions 6
C Description of the Ideal quality Engineering Position Career and Occupation Discussions 7
J CMM Programmer position - Baltimore Maryland Job Openings, Consulting and Employment Opportunities 0
L Form-dependent position prevention control FMEA and Control Plans 1
B Minitab Type 1 Gage Study on True Position Question Measurement Uncertainty (MU) 1
M Informational EU – Official position on EUDAMED delay Medical Device and FDA Regulations and Standards News 3
Proud Liberal Cp / Cpk on position using multiple MMC bonuses Capability, Accuracy and Stability - Processes, Machines, etc. 2
F Conversion of coordinate dimension holes to position dimension Design and Development of Products and Processes 3
B Design of fixture checking including Position of hole and slot General Measurement Device and Calibration Topics 5
was named killer AS9100 FAIR - True Position hole out by .0011" on 50 parts AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 11
M Informational COCIR Position Paper Harmonisation of Standards for Medical Devices Medical Device and FDA Regulations and Standards News 0
B True Position Measurement Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
F Holes position inspection - Calculation of centre distance and plug sizes of a gauge Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M Position paper Team NB Statement - Patient safety EU Medical Device Regulations 0
F Position tolerance check gage manufacturing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
P True Position vs X and Y Dimensions Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
Q How to perform Process Capability for true position Statistical Analysis Tools, Techniques and SPC 10
Ron Rompen Ford Method - Position Capability with MMC Modifier Capability, Accuracy and Stability - Processes, Machines, etc. 14
M True Position / GD&T - I'm staring at this drawing and I'm lost Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
O How to deal with Multiple Datums - Position with respect to Multiple Datum Feature Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
J New position and AS9100 audit is 1 month away- need advice AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 8
Proud Liberal Cpk on Position w/ MMC on Location and Size Capability, Accuracy and Stability - Processes, Machines, etc. 3
E Position of a milled hex - Print Callout Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
N True Position of slot Boundary with MMC Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
J True Position Question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
J Position Tolerance Called to Datums with MMC Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
N Procedure for determining pinhole position in condom Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
M Measuring the True Position of a Cylinder's Pierce Point Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M Offered Management Position - Limited Experience - Any Concerns? Quality Manager and Management Related Issues 13
C Dose Mapping - How to relate back to Routine Monitoring Position ISO 13485:2016 - Medical Device Quality Management Systems 3
T Optical Comparator measuring of Position of a Threaded Hole Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
E Composite Position Calculation on a 12 X 4 Hole Pattern Inspection, Prints (Drawings), Testing, Sampling and Related Topics 13
M Manager IMS (9001, 14001, 18001) Position in Organisation Chart ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 17
V GD&T Interpreting Datums in Two Single Segmented Position Tolerances Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M True Position and MMC (Dilemma Between Engineers) AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
P MDD position on Final Inspection/Release Employee Experience/Training EU Medical Device Regulations 1
S Tab to circle True Position? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
S GD&T Callout for Diametrical True Position Manufacturing and Related Processes 6
S Moving to a New Company for a New Position Coffee Break and Water Cooler Discussions 3
M Zero Tolerancing on True Position using MMC (Maximum Material Condition) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
Similar threads


















































Top Bottom