PPAP (Production Part Approval Process) files for Ford

#1
Hello

I have prepared ppap files for ford.ı want to see sample ppap fıles for ford .is there anybody has this fıle. Please share with me ur ppap fıles for ford...

thanks for help
 
Elsmar Forum Sponsor

Marc

Fully vaccinated are you?
Staff member
Admin
#2
PPAP files are so product specific I doubt there will be anyone here with completed examples of all the files that go into a PPAP package that they can share. Amongst other aspects they would probably be company confidential information.

Have you read through APQP - Advanced Product Quality Planning - In Consonance with the AIAG's APQP Manual?

Here's an example of a document used to ensure all PPAP requirements are addressed in one way or another that I found on the internet.
 

Attachments

Q

Qualgal

#3
I can not post a Ford PPAP submission, however, I am attaching a checklist that we have to follow to the letter in order to receive PPAP approval from Ford. It should be of some help.:bigwave:
 

Attachments

Last edited by a moderator:
R

ralphsulser

#6
Additionally your Ford Plant Incoming Quality department may have some other specific item for them to approve your PPAPs. Suggest you contact them to find out. I had one Ford plant that would only accept PPAP submissions if the package was hand delivered, not mailed or UPS'd or FedEX'd.
 
A

Alexandru

#8
---
Hello all,

I have a similar problem, but with the Ford_Customer_Specfics_for_PPAP document. Does anyone know which is the latest edition (I have only the one from March 2006). I see that the PPAP checklist is from 2010; Is it ok from my side to assume that the above mentioned document could have suffered a revision?

Thanks a lot in advance.

My best regards,

Dan
 

Stijloor

Staff member
Super Moderator
#9
---
Hello all,

I have a similar problem, but with the Ford_Customer_Specfics_for_PPAP document. Does anyone know which is the latest edition (I have only the one from March 2006). I see that the PPAP checklist is from 2010; Is it ok from my side to assume that the above mentioned document could have suffered a revision?

Thanks a lot in advance.

My best regards,

Dan
Dan,

Have you looked here?

Ford Motor Company Customer-Specific Requirements.

Stijloor.
 
Thread starter Similar threads Forum Replies Date
O PPAP'ed part manufacturer has discontinued production Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 7
Sidney Vianna AS9100 News PPAP in the Aerospace Sector - What is it? AS9145 - Requirements for Advanced Product Quality Planning and Production Part Approval Process AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
H Informational What is PPAP (Production Part Approval Process)? APQP and PPAP 26
K FAI (First Article Inspection) vs PPAP (Production Part Approval Process) APQP and PPAP 15
T Variable Dimensions / Part of Production / PPAP Dimensional Report Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
J PPAP (Production Part Approval Process) Requirements for Annual Revalidations APQP and PPAP 1
A What is PPAP (Production Part Approval Process) Why submit it and/with PSW APQP and PPAP 2
B Help for beginner - PPAP (Production Part Approval Process) APQP and PPAP 9
R Is Kappa Study Required during PPAP (Production Part Approval Process)? IATF 16949 - Automotive Quality Systems Standard 9
T Production Part Approval Process (PPAP) Presentation in ppt. format APQP and PPAP 3
F Who should Sign Supplier PPAP (Production Part Approval Process) documents? APQP and PPAP 13
H Who can require PPAP (Production Part Approval Process)? APQP and PPAP 7
S Tell Me All About PPAP (Production Part Approval Process) APQP and PPAP 7
J AIAG PPAP (Production Part Approval Process) Manual Fourth Edition Released APQP and PPAP 69
A PPAP (Production Part Approval Process) - Where can I buy the AIAG Manual? Preventive Action and Continuous Improvement 2
J PPAP (Production Part Approval Process) Submission Level Differences - Forms attached APQP and PPAP 17
W PPAP (Production Part Approval Process) - Clarify When submission is required APQP and PPAP 10
S "Update" the PPAP Package after Mass Production Commences APQP and PPAP 2
E What's the difference: AIAG-PPAP's "Significant Production Run" and "Run @ Rate"? APQP and PPAP 11
S Should PPAP Samples Come from a Production Run? APQP and PPAP 3
V Supplier?s PPAP - Production Process Control Plan Review, Evaluation and Approval? FMEA and Control Plans 5
O Significant Production Run - 2.1 in Section 2 of the PPAP Manual fourth edition APQP and PPAP 3
S PPAP - Production Run Quantities, Number of Subgroups and Subgroup Size APQP and PPAP 2
O Bulk Material PPAP - Design Matrix instead of a normal Design, Production FMEA APQP and PPAP 3
G Requirement to follow Control Plan for serial production in a PPAP run APQP and PPAP 4
S PPAP Production Sample Size APQP and PPAP 8
T Reworked components in PPAP production APQP and PPAP 22
I PPAP - Prototype vs. Production APQP and PPAP 6
P PPAP for Spare Parts - Low Volume - Occasional Production APQP and PPAP 5
C Re-PPAP My Parts? Production layout has changed APQP and PPAP 6
S PPAP Process Requirements-Significant Production Run APQP and PPAP 13
M Signed PSW directly to End customer, Tier 1 wants their own PPAP IATF 16949 - Automotive Quality Systems Standard 6
A PPAP Alternate Equipment IATF 16949 - Automotive Quality Systems Standard 10
D What does a level 1 (PSW) PPAP actually promise? APQP and PPAP 16
R PPAP Requirements for Tool Repair or Refurbishment APQP and PPAP 5
abrego44 AIAG PPAP manual for service part APQP and PPAP 4
A PPAP question for audit APQP and PPAP 16
G PPAP for Chemical Products APQP and PPAP 4
T Re-PPAP after updating CMM program? Manufacturing and Related Processes 9
J Supplier not responding to PPAP request APQP and PPAP 5
J Part submission warrant for Level 1 PPAP APQP and PPAP 1
K Should APQP/PPAP has its own section in a QM? Quality Management System (QMS) Manuals 1
B Toyota PPAP Process - Three Questions APQP and PPAP 5
G Supplier delivered recent PPAP, should he deliver yearly layout inspection? IATF 16949 - Automotive Quality Systems Standard 4
F How to submit a PPAP when a subcontractor is the sole manufacturer IATF 16949 - Automotive Quality Systems Standard 2
P PPAP samples retention time IATF 16949 - Automotive Quality Systems Standard 5
K Updated MSA with the Annual PPAP validations APQP and PPAP 8
P Managing How PPAP Requirements are Communicated in the Manufacturing Process and to Suppliers APQP and PPAP 5
E Annual PPAP+ deviation request ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
K OEM specific requirements - PPAP was rejected by STA Customer and Company Specific Requirements 5

Similar threads

Top Bottom