Pratt & Whitney Model B Supermic - How-To Manual?

K

kearnj

#1
Hi everyone,

My organization recently aquired a calibrated Model B supermic. We have a newer manual that is for the Model C, but isn't entirely applicable for the Model B.

Does anyone know of a good source for information, manual or otherwise that we could use to create a work instruction for our calibration technicians?

Thanks for your input.
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
Hi everyone,

My organization recently acquired a calibrated Model B supermic. We have a newer manual that is for the Model C, but isn't entirely applicable for the Model B.

Does anyone know of a good source for information, manual or otherwise that we could use to create a work instruction for our calibration technicians?

Thanks for your input.
The manual for your super micrometer Model B can be ordered directly from Pratt & Whitney.

The site states:

SME-UM User’s Manual (please indicate Model A,B, or C when ordering)
Stijloor.
 
K

kearnj

#3
Thanks, I guess that's a no-brainer. I wasn't sure if anyone was aware of any further information available on the net.
 
K

kearnj

#4
OK, to revise the question:
Say we're trying to verify against a rod standard that is 17.00015".

How is that read on the supermic?

On the left hand most side, we read two digits, followed by a single digit and in the third column is 0 to 10 that is adjustable by a thumb screw in the rear of the display.
 
K

kearnj

#5
Just thought I'd mention that we did get in touch with P&W. For a cool $86 they mailed me a good quality photocopy of an obscure manual. If anyone else has questions, I'd be more than happy to help out.
 
Thread starter Similar threads Forum Replies Date
J Measurement Accuracy Required by ISO 9001 - Pratt & Whitney Super Micrometer Model A General Measurement Device and Calibration Topics 1
Q Pratt and Whitney Supplier requirements Customer and Company Specific Requirements 2
S Correlation or Mann Whitney test results? Which to use Statistical Analysis Tools, Techniques and SPC 1
K PDCA cycle and ISO processes alternative model Quality Management System (QMS) Manuals 14
B Cybersecurity Maturity Model Certification for military customers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M Kano-model and Importance Benchmarking 1
V New Product Model CE Mark Certification under MDR EU Medical Device Regulations 0
DuncanGibbons Model-Based procedures and Architecting the QMS as a System Document Control Systems, Procedures, Forms and Templates 2
B Susceptible, Infected, Recovered model for coronavirus modeling Misc. Quality Assurance and Business Systems Related Topics 0
K A proposal for the model Quality Management - I need help for the project ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
howste Aerospace Improvement Maturity Model (AIMM) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
S Waterfall model or v-model design and development ISO 13485:2016 - Medical Device Quality Management Systems 2
T Change control and configuration management - When to create a new model/part number? Other Medical Device and Orthopedic Related Topics 0
N Mojonnier Model 1000 Documentation - Validation of my tank IQ-OQ-PQ US Food and Drug Administration (FDA) 0
M Are model# and Serial # required on a calibration cert? General Measurement Device and Calibration Topics 4
D Kanomax MODEL 3443 DIGITAL DUST MONITOR Calibration and Metrology Software and Hardware 3
S Least squares estimate, regression model and corresponding residuals Using Minitab Software 13
N Regression Model (Minitab 18) - Which values my input parameters should have Using Minitab Software 2
Sam Lazzara GS1 introduces Global Model Numbers for Medical Devices Other Medical Device Regulations World-Wide 2
J Revised MDSAP Audit Model - Health Canada - October 30, 2017 ISO 13485:2016 - Medical Device Quality Management Systems 7
H Taguchi mixed model DoE [L16 (4^3 2^6): factors interaction and ANOVA calculation Using Minitab Software 3
P Is ISO 9001 Model tested for its effectiveness by ISO before its release? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
K UDI "Version or Model" for Stand-Alone Medical Device Software US Food and Drug Administration (FDA) 6
R Need Help on Analysis: How to know potential causality model from historical data Problem Solving, Root Cause Fault and Failure Analysis 5
G New model for existing Class I Device Listing (510K exempt) US Food and Drug Administration (FDA) 8
L Communication Needs Identification and Communication Model Development Human Factors and Ergonomics in Engineering 10
M Calibration of a Power Meter Model Hm8115-2 (Hameg) General Measurement Device and Calibration Topics 8
pittmatj Countries that require Medical Device Model Number Registration Other Medical Device Regulations World-Wide 3
A Predictive Model Development (Regression?) Statistical Analysis Tools, Techniques and SPC 5
I Is ARIMA (Time Series Analysis) Model appropriate for this Dental Research? Using Minitab Software 4
S How to use Dummy Variable in Regression Model in Minitab Six Sigma 2
Ajit Basrur See this 1:15 model of Airbus A380 fly the skies! Coffee Break and Water Cooler Discussions 7
V Analysis of DOE Results and Model Finalization Using Minitab Software 4
J Standard / Brown & Sharp Gage Tower model E8-5000 Manual General Measurement Device and Calibration Topics 1
K Wilson Hardness Tester Model 525 Accuracy/Repeatability issues help General Measurement Device and Calibration Topics 4
M Even the ASQ got it wrong, the Kano model Quality Tools, Improvement and Analysis 4
P Is it necessary to show Model Number on the Labeling (meter box, label and manual)? Other US Medical Device Regulations 3
Y Can there be multiple Brazil Registration Holder (BRH) for same model ? Other Medical Device Regulations World-Wide 3
M KANO Model - Changing the source Quality Tools, Improvement and Analysis 2
T Subcontractor Model to Shelter Model - How to include in ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
G Minitab GLM (General Linear Model) - Problem with recognition of Level Using Minitab Software 1
J Quality Management Process Model Possible Interactions and Effects ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
R A GRP model that also considers the Preventive Maintenance Efficiency Reliability Analysis - Predictions, Testing and Standards 3
W General Linear Model - Formatting Data Six Sigma 3
A Sample Size for Mathematical Model with acceptable Confidence Level Using Minitab Software 7
M How to combine the Importance Performance Matrix and the KANO Model? Benchmarking 8
M Shingo Prize Model as an Assessment Guide for Lean Implementation Lean in Manufacturing and Service Industries 1
J Human Resources Management/Organisational Development - Blake & Mouton?s model Misc. Quality Assurance and Business Systems Related Topics 4
D Research, Design and Development Costing Model Procedure Business Continuity & Resiliency Planning (BCRP) 7
A Donabedian Model in Healthcare Setup Hospitals, Clinics & other Health Care Providers 2

Similar threads

Top Bottom