Pratt & Whitney Model C Supermic Digital Tailstock Meter Upgrade

#1
I'm wondering if anyone has installed the new Digital Tailstock Meter Upgrade for a model C Pratt & Whitney supermic? Ours only measures to .00001" and I need to go to .000001". I can't find any info on how it is installed and my manager won't approve until he knows we can install it in house. Does anyone know how these are installed?
 
Elsmar Forum Sponsor

dwperron

Trusted Information Resource
#2
I've done it in a lab I worked at.
It is a simple replacement, take out the old analog meter and the new one drops in.
It works slick!
One thing we discovered is that the zero adjust potentiometer on the Model C was a bit too coarse, made it difficult to zero. We replaced that also with a 20 turn pot.
 
Thread starter Similar threads Forum Replies Date
K Pratt & Whitney Model B Supermic - How-To Manual? General Measurement Device and Calibration Topics 4
J Measurement Accuracy Required by ISO 9001 - Pratt & Whitney Super Micrometer Model A General Measurement Device and Calibration Topics 1
Q Pratt and Whitney Supplier requirements Customer and Company Specific Requirements 2
S Correlation or Mann Whitney test results? Which to use Statistical Analysis Tools, Techniques and SPC 1
A Applying agile model for Computer system Validation Medical Device and FDA Regulations and Standards News 3
L How to deal with the model number symbol for X-RAY PRODUCT Other Medical Device Related Standards 1
P Arena simulation, How can my Arena model have exactly the same output each time I run it? Process Maps, Process Mapping and Turtle Diagrams 0
J UDI-DI how should we interpret Device version or model to determine if a new UDI-DI is needed? EU Medical Device Regulations 0
K PDCA cycle and ISO processes alternative model Quality Management System (QMS) Manuals 14
B Cybersecurity Maturity Model Certification for military customers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
M Kano-model and Importance Benchmarking 1
V New Product Model CE Mark Certification under MDR EU Medical Device Regulations 0
DuncanGibbons Model-Based procedures and Architecting the QMS as a System Document Control Systems, Procedures, Forms and Templates 2
B Susceptible, Infected, Recovered model for coronavirus modeling Misc. Quality Assurance and Business Systems Related Topics 0
K A proposal for the model Quality Management - I need help for the project ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
howste IAQG News Aerospace Improvement Maturity Model (AIMM) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
S Waterfall model or v-model design and development ISO 13485:2016 - Medical Device Quality Management Systems 2
T Change control and configuration management - When to create a new model/part number? Other Medical Device and Orthopedic Related Topics 0
N Mojonnier Model 1000 Documentation - Validation of my tank IQ-OQ-PQ US Food and Drug Administration (FDA) 0
M Are model# and Serial # required on a calibration cert? General Measurement Device and Calibration Topics 4
D Kanomax MODEL 3443 DIGITAL DUST MONITOR Calibration and Metrology Software and Hardware 3
S Least squares estimate, regression model and corresponding residuals Using Minitab Software 13
N Regression Model (Minitab 18) - Which values my input parameters should have Using Minitab Software 2
Sam Lazzara GS1 introduces Global Model Numbers for Medical Devices Other Medical Device Regulations World-Wide 2
J Revised MDSAP Audit Model - Health Canada - October 30, 2017 ISO 13485:2016 - Medical Device Quality Management Systems 7
H Taguchi mixed model DoE [L16 (4^3 2^6): factors interaction and ANOVA calculation Using Minitab Software 3
P Is ISO 9001 Model tested for its effectiveness by ISO before its release? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
K UDI "Version or Model" for Stand-Alone Medical Device Software US Food and Drug Administration (FDA) 6
R Need Help on Analysis: How to know potential causality model from historical data Problem Solving, Root Cause Fault and Failure Analysis 5
G New model for existing Class I Device Listing (510K exempt) US Food and Drug Administration (FDA) 8
L Communication Needs Identification and Communication Model Development Human Factors and Ergonomics in Engineering 10
M Calibration of a Power Meter Model Hm8115-2 (Hameg) General Measurement Device and Calibration Topics 8
pittmatj Countries that require Medical Device Model Number Registration Other Medical Device Regulations World-Wide 3
A Predictive Model Development (Regression?) Statistical Analysis Tools, Techniques and SPC 5
I Is ARIMA (Time Series Analysis) Model appropriate for this Dental Research? Using Minitab Software 4
S How to use Dummy Variable in Regression Model in Minitab Six Sigma 2
Ajit Basrur See this 1:15 model of Airbus A380 fly the skies! Coffee Break and Water Cooler Discussions 7
V Analysis of DOE Results and Model Finalization Using Minitab Software 4
J Standard / Brown & Sharp Gage Tower model E8-5000 Manual General Measurement Device and Calibration Topics 1
K Wilson Hardness Tester Model 525 Accuracy/Repeatability issues help General Measurement Device and Calibration Topics 4
M Even the ASQ got it wrong, the Kano model Quality Tools, Improvement and Analysis 4
P Is it necessary to show Model Number on the Labeling (meter box, label and manual)? Other US Medical Device Regulations 3
Y Can there be multiple Brazil Registration Holder (BRH) for same model ? Other Medical Device Regulations World-Wide 3
M KANO Model - Changing the source Quality Tools, Improvement and Analysis 2
T Subcontractor Model to Shelter Model - How to include in ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
G Minitab GLM (General Linear Model) - Problem with recognition of Level Using Minitab Software 1
J Quality Management Process Model Possible Interactions and Effects ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
R A GRP model that also considers the Preventive Maintenance Efficiency Reliability Analysis - Predictions, Testing and Standards 3
W General Linear Model - Formatting Data Six Sigma 3
A Sample Size for Mathematical Model with acceptable Confidence Level Using Minitab Software 7

Similar threads

Top Bottom