SBS - The best value in QMS software

PRI approved Sources & Consultants in Canada

D

David Johnson

#11
#11
KIDDO said:
Hello all;
Can anyone direct me to any PRI "approved" sources for consulting a company for AC7110, AC7110/4, AC7110/5, AC7110/12 and AC7110/13 (welding) within Canada? More specifically, within Ontario?

We need assistance for implementing welding procedures and welder training. Any help would be greatly appreciated!:mg:

Regards,
Kiddo:bigwave:
Click to expand...
XXXXXXX consulting company can help. They perform more Nadcap consulting than all others and with hundreds of clients have a 100% success rate passing first attempt at certification. They have four Nadcap welding consultings, two of which are actually part time consultants for Expert Resource and part-time PRI Welding Lead Auditors (so they are the authority). David Johnson
 
Last edited by a moderator:
Elsmar Forum Sponsor
D

David Johnson

#12
#12
The welding audit checklists are no longer public unless you are a "supplier" registered with PRI. But, I have .pdf copies of them that can be used for training purposes. Email me and I'll send them to you.

Admin note: If you have .pdf copies and they are *not* copyrighted, we prefer you share them (you can attach files to posts, and if they're bigger than 3MB you can contact me by PM and I will tell you how to make them available here) here rather than asking folks to email you and putting your email address in the post.

Thanks,

Marc
 
Last edited by a moderator:
Wes Bucey

Wes Bucey

Prophet of Profit
#13
#13
ExpertResource said:
The welding audit checklists are no longer public unless you are a "supplier" registered with PRI. But, I have .pdf copies of them that can be used for training purposes. Email me and I'll send them to you.

Admin note: If you have .pdf copies and they are *not* copyrighted, we prefer you share them (you can attach files to posts, and if they're bigger than 3MB you can contact me by PM and I will tell you how to make them available here) here rather than asking folks to email you and putting your email address in the post.

Thanks,

Marc
Click to expand...
Just a trigger to alert (via email notice) the named poster there has been an edit to his post(s)

These are important factors in the
The Elsmar Cove Forum TOS (Terms of Service)
and we do not want misunderstandings.
 
S

Sorin

#15
#15
KIDDO said:
Thanks Sorin. I am registered with eaudit but when I select Welding, there's nothing there.

Kiddo
Click to expand...

Something is fishy cause this is what I see when clicking on Welding (in Checklists) - see thumbnail.

BTW: Checklists are available to ANYONE with an account. One can open an account just for information. Those checklists and document are public. YOU do not need to be an aerospace supplier in order to access the documentation.


Let me know what checklists you want and I can post them here - but they are there.

Sorin
 

Attachments

Last edited by a moderator:
K

KIDDO

Involved In Discussions
#16
#16
sorin said:
Something is fishy cause this is what I see when clicking on Welding (in Checklists) - see thumbnail.

BTW: Checklists are available to ANYONE with an account. One can open an account just for information. Those checklists and document are public. YOU do not need to be an aerospace supplier in order to access the documentation.


Let me know what checklists you want and I can post them here - but they are there.

Sorin
Click to expand...
I was able to log in as our Quality Manager and am able to see the documents you have noted. It's strange that they have taken away the options from me as I was able to access the checklists before. Either way, I just wanted to make sure that I had the current revisions. We were able to find someone local to assist us with this new venture and brings along quite a bit of experience with Nadcap. Thanks again to all for your assistance!

Regards,
Kiddo
 
M

mutton4u

#17
#17
you have to register on the eauditnet.com website. It is in public documents, as are all the commodity checklists.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
S World Quality Week - PRI Articles AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
G Combining AS9100, ISO 9001, & PRI (NADCAP) into 1 Internal Audit Internal Auditing 8
J PRI - NADCAP Certification requirement - AS9100 audit first before NADCAP audit? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 12
WCHorn NADCAP Nonconformance to a Handbook - PRI handbook for audits to AC7115 Quality Manager and Management Related Issues 1
G Is anyone familiar with PRI - Nadcap? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 20
Marc PRI - Performance Review Institute General Measurement Device and Calibration Topics 2
J Promoting and marketing of a non approved device 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
bryan willemot Looking for an Approved vendors list template Document Control Systems, Procedures, Forms and Templates 11
U Approved Vendor (supplier) List Supplier Quality Assurance and other Supplier Issues 8
N Validating Software before getting approved as Class 2 device US Food and Drug Administration (FDA) 5
D Approved supplier list - Distributors question ISO 13485:2016 - Medical Device Quality Management Systems 6
P FDA Approved Product Contact Parts ISO 13485:2016 - Medical Device Quality Management Systems 6
E Adding models to an approved Russian Registration Certificate Other Medical Device Regulations World-Wide 1
D Approved supplier list for R&D ISO 13485:2016 - Medical Device Quality Management Systems 5
R Qualification list of businesses approved to Off-Shore Aerospace work. AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
S Customer Specific Requirements (CSR) not signed/approved IATF 16949 - Automotive Quality Systems Standard 17
M Requirements for an MDD approved device after 26/05/2021 EU Medical Device Regulations 3
S Shipment of a CE Approved Class III Device to the EU Member States Other US Medical Device Regulations 1
Ajit Basrur Why is ISO 14644-3:2019 not approved by US? Other Medical Device Related Standards 1
I Approved Suppliers ISO/IEC 17025:2017 and used test equipment ISO 17025 related Discussions 6
V IATF 16949 8.4.1 Control of externally provided processes, products and services - Should the CB be on our Approved Supplier List? IATF 16949 - Automotive Quality Systems Standard 10
K Changing the Address in 510(K) Approved Product 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
Ed Panek Adverse Event Clinical Trial using a 510K approved Device Other US Medical Device Regulations 6
D FDA Approved Class II Medical Device? Other US Medical Device Regulations 11
E Part 11 Compliance, Excel living documents (i.e. document master list, equipment list, approved supplier list) Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 3
D Document review on already approved registrations requested by China's NMPA? China Medical Device Regulations 3
Q AS9120 Vendor of ESD Monitoring Equipment needs to be in the Approved Supplier List? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
F List of approved API manufacturers or Formulations manufacturers US Food and Drug Administration (FDA) 0
J Change management with CFDA approved devices China Medical Device Regulations 1
J Dr Training Records - Training doctors to use a PMA approved medical device Other US Medical Device Regulations 2
L CQI & IRCA not accepting new applications for ATPs (Approved Training Partner) ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 6
D FDA filing guidance to add sterilization step for approved drug Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 8
Jane's Should the facility landlord be an approved supplier? Supplier Quality Assurance and other Supplier Issues 12
I Adverse Event Reported during Non-Approved Indication Use EU Medical Device Regulations 4
F Scientific and Research Papers for Foreign Approved Devices Other US Medical Device Regulations 1
P Approved Supplier Register and Calibration Suppliers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
J FDA approved Medical Devices for PVD and DLC Coatings US Food and Drug Administration (FDA) 2
M ISO 14971:2007 Revision Approved - The Delft ISO TC 210 plenary meeting - Nov 2016 ISO 14971 - Medical Device Risk Management 2
H IVD in US Phase III Clinical Trial - Non-CE Marked and Non-FDA Approved Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 3
J Why Control Plan Review needs to be Approved by the Customer IATF 16949 - Automotive Quality Systems Standard 1
F China Medical Device Labeling - Not approved for use, is for an exhibition EU Medical Device Regulations 4
S API Q1 Approved Training & Professional Certification Sources Oil and Gas Industry Standards and Regulations 5
gunnyshore Benchmarking: Approved Supplier List for Multiple Sites Supplier Quality Assurance and other Supplier Issues 2
S Why Drugs and generics are Approved while Biologics are Licensed ? US Food and Drug Administration (FDA) 1
L Do HR consultants need to be on Approved Supplier List? Supplier Quality Assurance and other Supplier Issues 5
M Making a change to an approved Medical Device Other US Medical Device Regulations 9
D Is a separate spreadsheet required for the ASL (Approved Supplier List)? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
J Investigational Device Exemption approved 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
T Do Machine Service Contractors Need to be an Approved Supplier? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
L Can I ship Demo Units to the UAE if we are not Approved? Other Medical Device and Orthopedic Related Topics 2

Similar threads

Top Bottom