Prioritized Reduction Plan - TS 16949 Clause 4.13.2.1 - Meeting this requirement?

M

monkey

#1
How are people meeting this requirement? What sorts of Prioritized Reduction Plans are you all instituting? We quantify and analyze non-conforming product and set goals for improvement, look for common causes, etc., but I'm not sure what sort of Prioritized Reduction Plan we need to have. Does it have to be documented? Tracking the progress of the plan would be done at Management Review meetings where we discuss all measurables. Thanks!
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration
Staff member
Admin
#2
Do a search here in the forums for the words Prioritized Reduction and make sure you set your search to search all forums. There are a number of threads where Prioritized Reduction Plans are discussed. I did a search and came up with a number of threads with Prioritized Reduction in the title.

If none of the threads answer your specific question, then come back and give us some more specifics. For example: What industry? What processes?
 
T

tomvehoski

#3
It sounds like you may already be on the right track. Example...

April - July Scrap

Part AAA - 1045 pieces = $10,000
Part BBB - 133 pieces = $1,000
Part CCC - 2000 pieces = $5,000

My priorities would be to reduce scrap on AAA, then CCC, then BBB as resources allow. Show documentation and reasoning as to why you have chosen to work on a certain project. You could document this through corrective/preventive action systems.

Hope this helps,

Tom
 
A

Al Dyer

#4
You might consider using the RPN's from your FMEA's to define your Prioritized Reduction Plan. The metrics are already there and if you do have a corrective action you should be updating the fmea RPN's.

Let's use the tools we have and not create more work and possible oversights that an audir might catch.
 
Thread starter Similar threads Forum Replies Date
A Prioritized Reduction Plan & Kaizen IATF 16949 - Automotive Quality Systems Standard 1
D Prioritized reduction plan on scrap not being corrected by corrective action Misc. Quality Assurance and Business Systems Related Topics 3
J Prioritized Reduction Plans - What is the intent of section 4.13.2.1? Nonconformance and Corrective Action 1
D Prioritized Action Plan - Start by identifying major scrap items/categories/costs? QS-9000 - American Automotive Manufacturers Standard 5
M CI Prioritized Action Plan QS-9000 - American Automotive Manufacturers Standard 1
P QS-9000 Clause 4.2.5 - Prioritized Action Plans Preventive Action and Continuous Improvement 9
O MDSAP Reduction in Scope Other Medical Device Related Standards 0
D Reduction of software class based on multiple external risk controls IEC 62304 - Medical Device Software Life Cycle Processes 5
Q Information for safety EN ISO 14971:2012 - Customer Risk Reduction ISO 14971 - Medical Device Risk Management 6
B Proactive efforts to reduce risk - PFMEA risk reduction activities IATF 16949 - Automotive Quality Systems Standard 8
K Risk Reduction by Risk Control: IEC:62304-Class C ISO 14971 - Medical Device Risk Management 15
F Calculation of reduction on audit time - IAF MD1:2007, IAF MD5:2015 and IAF MD11:2013 General Auditing Discussions 1
M Severity Reduction in a Design FMEA (DFMEA) FMEA and Control Plans 25
0 Calculation of Contamination Reduction Efficiency Statistical Analysis Tools, Techniques and SPC 4
A Destructive Test Sample Size Reduction Statistical Analysis Tools, Techniques and SPC 10
W Justifying an Inspection Reduction Plan to a Customer Statistical Analysis Tools, Techniques and SPC 3
C Setup Time Reduction Project - How big should my team be? Six Sigma 2
W Complaint Code - Sample Size Reduction Inspection, Prints (Drawings), Testing, Sampling and Related Topics 14
B Contour Plots of Time, Temperature and Log Reduction of Cells Using Minitab Software 9
P Reduction in the Inspection Frequency - Is approval required? IATF 16949 - Automotive Quality Systems Standard 1
D Defibrillation Energy Reduction ? PWB Connector Pitch Spacing IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
S Medical Device or Cosmetic Device in Korea? Hand Held Wrinkle Reduction LED Light Other Medical Device Regulations World-Wide 1
S Medical Device or Cosmetic Device in Japan? Hand Held Wrinkle Reduction LED Light Japan Medical Device Regulations 3
R EMS Programme Target is Reduction in CO2 Emission Miscellaneous Environmental Standards and EMS Related Discussions 5
K Energy Reduction Objectives and Targets help ISO 14001:2015 Specific Discussions 2
J Reduction of Pull Off Test Inspection Frequency - Capability Query Quality Tools, Improvement and Analysis 1
N Usability Formula to Predict Use Error Reduction IEC 62366 - Medical Device Usability Engineering 6
J Cost Reduction Information Request Manufacturing and Related Processes 9
J Is anyone using "Costaware" Cost Reduction Software? Quality Assurance and Compliance Software Tools and Solutions 0
Howard Atkins FMEA RPN Reduction Process FMEA and Control Plans 4
Z Rework Reduction Six Sigma Project - Need help Six Sigma 5
P Risk Analysis and Risk Reduction requirements in 7.2.2.2 IATF 16949 - Automotive Quality Systems Standard 8
A Reduction of Pages in Work Instructions and Procedures Document Control Systems, Procedures, Forms and Templates 5
bobdoering Ford Executives To Take Thirty Percent Salary Reduction. World News 7
Ajit Basrur Reduction of calibration frequency for CMM (coordinate measuring machine) General Measurement Device and Calibration Topics 9
R Cost Reduction Calculation Formula - KPI (Key Performance Indicators) IATF 16949 - Automotive Quality Systems Standard 5
C What would be the Cost Reduction Activities for HR Department ? Training - Internal, External, Online and Distance Learning 9
D Waste Reduction by Implementation of Lean - Project Report Lean in Manufacturing and Service Industries 10
C Scrap Reduction with PF/CE/CNX/SOP Methodology The Reading Room 8
D Business Case for Lead Time Reduction Project Lean in Manufacturing and Service Industries 9
A Lead time reduction project on several processes Lean in Manufacturing and Service Industries 6
Q Reduction Of Foreign Matter (Contamination) Complaints in your Factory Manufacturing and Related Processes 6
CarolX PPM Reduction Action Plans - Goal of 10 PPM's at Production Launch IATF 16949 - Automotive Quality Systems Standard 3
T PPM Production Launch and Reduction Action Plan examples needed Document Control Systems, Procedures, Forms and Templates 3
M Cost Avoidance Calculation - Scrap Reduction Statistical Analysis Tools, Techniques and SPC 4
S Factory Overhead Cost Reduction Misc. Quality Assurance and Business Systems Related Topics 9
U Documentation Reduction - Over Documented ISO 9001:2000 QMS Document Control Systems, Procedures, Forms and Templates 23
B Severity Reduction by Product or Process Design Change? Seeking Good Example Design and Development of Products and Processes 2
R FMEA review, RPN reduction - Any "rule of thumb" as to what makes an RPN too high? FMEA and Control Plans 12
K RPN reduction - Occurrance Reduction - Reducing occurance of defect on line FMEA and Control Plans 1

Similar threads

Top Bottom