Problem with 21 CFR Part 820 - US FDA Quality System Regulations (QSR) sub-forum link - 2 May 2019

Marc

Marc

Fully vaccinated are you?
Leader
#1
#1
There is a problem identified with a sub-forum link. I have opened a ticket with TODO10 to get it resolved.

It is:
A forum member reported: "Could you please check the status of "21 CFR Part 820 - US FDA Quality System Regulations (QSR)" subforum?​
It seems to be no more available. Hovering on the links , the browser shows in the bottom part the correct address, but after clicking a wrong forums open - the actual page opened is FMEA and Control Plans "​
​
I checked and the node appears to be set up correctly, but it appears to have "disappeared". Clicking on the link (see attached) takes me to FMEA and Control Plans​
​
21-cfr-part-820-forum-link-20190502.jpg​
​
 
Last edited:
GAGEpack - Gage & Calibration Management
Elsmar Forum Sponsor
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
D 10.2.3 Problem Solving - What to look for at a non production remote site? IATF 16949 - Automotive Quality Systems Standard 4
D Problem Solving Problem Solving, Root Cause Fault and Failure Analysis 3
G Supplier problem solving IATF 16949 - Automotive Quality Systems Standard 8
M PROBLEM IN SCOPE OF ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 6
B Leadership non-conformity, Top Management's involvement in Problem Solving IATF 16949 - Automotive Quality Systems Standard 10
P Looking for help with an Ansys Workbench problem Manufacturing and Related Processes 0
M How to apply IEC 62304 Problem Resolution Process for bugs discovered prior to release i.e. during initial development? IEC 62304 - Medical Device Software Life Cycle Processes 2
J PROBLEM SOLVING - IATF and GM CSR IATF 16949 - Automotive Quality Systems Standard 0
W 6.1.3 Compliance obligations b) - problem with understanding ISO 14001:2015 Specific Discussions 0
Beth Savage Problem switching DNS Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 0
M Help on formulating a LP minimization problem Manufacturing and Related Processes 2
O Problem in Minitab - ERROR * Factor Voltage is highly correlated with other terms Using Minitab Software 10
J Mandatory Problem Reporting and Recalls Canada Medical Device Regulations 0
J How to keep MDD certificate valid when legal manufacturer has liquidity problem EU Medical Device Regulations 0
normhowe "The Problem with Quality Management: Process orientation, controllability and zero-defect processes as modern myths" Book, Video, Blog and Web Site Reviews and Recommendations 2
M Problem with nonlinear regression Using Minitab Software 12
M Problem Solving in Fiat Automobiles Problem Solving, Root Cause Fault and Failure Analysis 0
R Problem solving activity - Three hours to fix the issue Manufacturing and Related Processes 15
T Formal Q Self Assessment - Problem with assigning Product and Process Customer and Company Specific Requirements 1
NDesouza Go See, Think, Do (GSTD) Problem Solving Activity Food Safety - ISO 22000, HACCP (21 CFR 120) 8
Marc Medical device vulnerability highlights problem of third-party code in IoT devices Other Medical Device and Orthopedic Related Topics 1
P How far an operator can reach into a machine before it becomes an ergonomic problem CE Marking (Conformité Européene) / CB Scheme 5
V Ammeter calibration - Measuring head (on pic.) problem General Measurement Device and Calibration Topics 1
G Problem Resolution Report Monitoring - Customer complaint or PRR as general motors use Customer Complaints 12
S Relationship between IEC 62304 problem resolution and ISO 13485 IEC 62304 - Medical Device Software Life Cycle Processes 8
qualprod Add new action plans in CA, while waiting effectiveness - Same problem reappears ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
bryan willemot Documenting past problem history for fasteners for AS9100 Rev D AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
Marc Problem Opening Attachments Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 4
K Does anyone have a copy of a GM 5 Phase Problem solving form Problem Solving, Root Cause Fault and Failure Analysis 1
D Training for AS13000 - Problem Solving Requirements for Suppliers Training - Internal, External, Online and Distance Learning 17
eule del ayre Manual Inventory System - Problem is discipline of the employees Lean in Manufacturing and Service Industries 7
G When preventative action is prohibited by cost in 8D problem solving Problem Solving, Root Cause Fault and Failure Analysis 1
G When preventative action is prohibited by cost in 8D problem solving Problem Solving, Root Cause Fault and Failure Analysis 8
Marc vBulletin to Xenforo Import Problem Reports 28180928 Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 25
M Training in 8D Problem Solving as a Preventive Action? Problem Solving, Root Cause Fault and Failure Analysis 9
A 5Why vs. 8D - Problem Solving Problem Solving, Root Cause Fault and Failure Analysis 19
K Documented problem solving and documented error-proofing - IATF 16949 10.2.3 & 10.2.4 Internal Auditing 7
V Query on PA66+GF15% - Color variation (Natural to Yellowish) problem Manufacturing and Related Processes 20
J Can someone help me get the UCL AND LCL for this problem? Statistical Analysis Tools, Techniques and SPC 2
P Problem with IATF 16949 Clause 7.2.3 Requirements (Internal Auditor Competency) IATF 16949 - Automotive Quality Systems Standard 3
K Problem with Cable Composed of Coextruded Litz Wire and Tube Manufacturing and Related Processes 1
W Documented Problem-Solving for Automotive IATF 16949 - Automotive Quality Systems Standard 4
R Review of "Key Data" for contract labs, but SOP doesn't define "key data". Problem? Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
M Taguchi Loss Function Problem Misc. Quality Assurance and Business Systems Related Topics 2
R RoHS Compliance Problem with One Component RoHS, REACH, ELV, IMDS and Restricted Substances 5
Q Problem Solving Techniques - 5 why or Fishbone diagram ? Problem Solving, Root Cause Fault and Failure Analysis 8
S Problem Solving Database for Each Machine Manufacturing and Related Processes 5
L Suppliers Problem - One of our material suppliers is not ISO certified ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
Y Please help me solve a DOE problem - New Minitab User Using Minitab Software 36
J Should failure mode caused by Fixture problem be into PFMEA? FMEA and Control Plans 2

Similar threads

Top Bottom