SBS - The Best Value in QMS software

Procedure for Comparing the Monitor Reading with Laboratory Result

L

lumpylumfy

#1
I want to know what calculation this report used for calculated Bias formula.

Gas-in-oil standard S =100 ppm, laboratory result for S = 90 ppm
Laboratory result for 4 duplicate sample = 250, 230, 210 and 240 ppm
laboratory result corrected for bias = 275, 254, 231, 263 ppm

How they get (The red bold) result from bias calculation.

I just know its tell ' calculate the bias of the laboratory by comparing its results for the gas-in-oil standard sample to what was actually prepared'

I calculate the bias factor [10/11] mean 250 multiply with [10/11] get 274.

So what formula its use..here I attached the paper for reference.

I hope you all helping me out. I already google and find the answer for a month.
 

Attachments

Elsmar Forum Sponsor

Marc

Fully vaccinated are you?
Staff member
Admin
#2
My Thanks in advance to anyone who can help with this unanswered question. And, should you be browsing threads and find this one, and it still has no reply, if you can help we will all appreciate it.
 
L

lumpylumfy

#4
I also read several journal and read again the report from CIGRE Report 409 Working Group D1.01 (TF 15) Report on Gas Monitor Oil-Filled Electrical Equipment . To looking again if I miss something.

:thanks:
 
Last edited by a moderator:

Statistical Steven

Statistician
Staff member
Super Moderator
#5
Looks like they correct the measured values by the percent bias between the standard and the lab result (100-90)/100 which is 10%. Multiple the unadjusted values by 10% you get the adjusted values.


I want to know what calculation this report used for calculated Bias formula.

Gas-in-oil standard S =100 ppm, laboratory result for S = 90 ppm
Laboratory result for 4 duplicate sample = 250, 230, 210 and 240 ppm
laboratory result corrected for bias = 275, 254, 231, 263 ppm

How they get (The red bold) result from bias calculation.

I just know its tell ' calculate the bias of the laboratory by comparing its results for the gas-in-oil standard sample to what was actually prepared'

I calculate the bias factor [10/11] mean 250 multiply with [10/11] get 274.

So what formula its use..here I attached the paper for reference.

I hope you all helping me out. I already google and find the answer for a month.
 
Thread starter Similar threads Forum Replies Date
B Process / Procedure - Radiographic (X-Ray) Non-Film Document Control Systems, Procedures, Forms and Templates 0
M Procedure for vigilance system according to new MDR EU Medical Device Regulations 0
M Procedure for clinical evaluation according to new MDR EU Medical Device Regulations 0
S Production Work Order Procedure 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
E System&Procedure pack or accessory EU Medical Device Regulations 0
K Contract Manufacturer Do they need a complaint procedure? Medical Device and FDA Regulations and Standards News 8
E Design and Development file Procedure ISO 13485:2016 - Medical Device Quality Management Systems 0
B Procedure facility license in karnataka Manufacturing and Related Processes 3
S MDR - System and procedure pack article 22 and all sub processes that apply ISO 13485:2016 - Medical Device Quality Management Systems 0
P Software verification and validation procedure IEC 62304 - Medical Device Software Life Cycle Processes 6
B Procedure packs with non-medical devices EU Medical Device Regulations 1
K Need procedure for D&D inputs? ISO 13485:2016 - Medical Device Quality Management Systems 4
J Example of a defined procedure for carrying out Material Review Board (MRB) Manufacturing and Related Processes 0
A ISO 13485 procedure change and reflect to legacy manufacture items ISO 13485:2016 - Medical Device Quality Management Systems 2
S What should i choose for "testing procedure" characteristics? (N95) General Information Resources 0
S Critical characteristic on manufacturing operations test procedure Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
A SPC procedure / flow chart Statistical Analysis Tools, Techniques and SPC 2
J Action Not defined in procedure - NC - Incoming inspection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
E Procedure ( SOP) for Device Master Record ( DMR ) and for Device History Record (DHR)? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
shimonv Document Control Procedure Header Content Document Control Systems, Procedures, Forms and Templates 4
U Procedure pack components EU Medical Device Regulations 3
G Control Plan & PFMEA Review Procedure? FMEA and Control Plans 8
J Strategy for MDR Regulatory Compliance Procedure ISO 13485:2016 - Medical Device Quality Management Systems 4
A IVD in MDR procedure pack EU Medical Device Regulations 2
G RoHS Procedure REACH and RoHS Conversations 2
John Predmore Configuration Management as a process instead of a procedure AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
L How to add exemption or statement to control of document procedure? ISO 13485:2016 - Medical Device Quality Management Systems 5
A Design and development procedure for API Spec Q2 Oil and Gas Industry Standards and Regulations 6
W Using tailoring guidelines to tailor a QMS procedure ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
M Change management procedure when 7.3 is not applicable ISO 13485:2016 - Medical Device Quality Management Systems 5
L Sample Procedure from Contract Manufacturer Prospective ISO 14971 - Medical Device Risk Management 1
T Internal Nonconformance procedure thoughts (AS9100) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
Anonymous16-2 SOP (Standard Operating Procedure) Numbering Document Control Systems, Procedures, Forms and Templates 7
M UDI procedure/ report 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
DuncanGibbons Resources for aiding in procedure, work instruction and manufacturing plan development and management AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
S Article 22 Procedure Pack Labelling EU Medical Device Regulations 4
N EU MDR - Applicability Article 22 Systems and Procedure Packs CE Marking (Conformité Européene) / CB Scheme 4
M Example of statement for procedure pack MDR Article 22? Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 0
R Procedure, Frequency and Acceptance Criteria for Replicate, Recalibration, Before-After and Intermediate Checks ISO 17025 related Discussions 8
B FDA-Medical Device Reporting (MDR )procedure compliant with 21CFR section 803 US Food and Drug Administration (FDA) 0
M MDR - Is a formal GSPR Procedure required? EU Medical Device Regulations 20
Moncia Production Planning procedure ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
Q Tracking Procedure Revisions (Document Control) Document Control Systems, Procedures, Forms and Templates 9
L Purchasing procedure and workload ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
J Roles and accountabilities procedure? ISO 13485:2016 - Medical Device Quality Management Systems 9
K Procedure equals a process? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 25
M EU MDR - RA procedure for EU EU Medical Device Regulations 5
F Procedure for Device End of Life/Obsolescence Other Medical Device and Orthopedic Related Topics 3
A MAH license transfer (medical device registrant) procedure in Indonesia Other US Medical Device Regulations 0
F ISO 13485 8.2.3 Reporting to regulatory authorities: Question regarding a procedure for this clause. ISO 13485:2016 - Medical Device Quality Management Systems 4

Similar threads

Top Bottom