Process Flow diagram steps for inspection and packaging

nitros1

Starting to get Involved
#1
Hi greetings.

I'm currently revising a Process flow for a assembly process in the automotive industry as a tier 1. I have looked for guidelines or an official manual but I haven't found any, just a brief mention of it in the aiag ppap manual, is there any one you have found and you recommend?
I have a question about the intermediate part of the pflow , it currently looks like this:

*bezel molding process ( fabricating symbol)
*bezel inspection and storage ( inspection symbol)
*molding material storage (storage symbol)

From here it just goes to the stations of the assembly line. Does the transportation from molding kan ban to the assembly line needs to be mention as another step? the problem with this being yes is that all the current documentation has been approved with out it.

I appreciate your help, thanks.
 

AndyN

A problem shared...
Staff member
Super Moderator
#2
If this is all there is, you're not describing a process. There's no input. Inspection is a separate function from storage. If you intend defining a PFMEA from this, then transport should be included.
 

nitros1

Starting to get Involved
#3
If this is all there is, you're not describing a process. There's no input. Inspection is a separate function from storage. If you intend defining a PFMEA from this, then transport should be included.
Hello, my bad I meant inspection and packaging. Could you help me on how to describe it?

Thanks
 

nitros1

Starting to get Involved
#5
I could, but I'd need much more information. Can I ask why you are doing this? Don't you have a team you can work with?
Well because I see an opportunity to upgrade an existent pfmea and plow of a process that I just have received, and well in practice I don't have a team to work with , and I don't trust the guys in other programs.

The process flow basically is a molding process where the molded parts are used later in a assembly line.
 

Top Bottom