Processes for realization of Products

P

Paes Mendes

#1
Must the processes related to the core competences be considered in the processes for the realization of Products?
 
Elsmar Forum Sponsor
P

Paes Mendes

#3
By core competence I mean the areas of excellence in the company, I think also called key competence.
This areas are defined during the startegy process and are the ones where our know how must be as good as or better than our competitors.
I hope this can help you to help me.
PM
 

Marc

Fully vaccinated are you?
Leader
#4
Well, if I understand what you are asking, the answer is yes. Here is how I understand it:

Your core competences (see www.hq.nasa.gov/office/hqlibrary/ppm/ppm25.htm and Core Competence )

> Core competence - the idea that a company can succeed without a
> structural competitive advantage by becoming the best at a few key
> skills or in a few knowledge areas - has enjoyed enormous popularity
> over the past 6 years. But despite all the attention this concept has
> received, its tangible impact on corporate performance has been mixed
> at best. To address the need for a more rigorous approach, an article
> proposes a clear definition of what a core competence is (and is not),
> and suggests how an executive in pursuit of a competence-led strategy
> is likely to prove worthwhile. It outlines 3 distinct paths to
> developing a competence - evolution, incubation, and acquisition...

are your 'specialties'. Processes related to your core competence are your realization of product. If your Core Competence is design and manufacture of electronic circuits, all the processes involved are the foundation. Realization of product (core competence) is through a series of processes. If I understand the question correctly, I do not see how you can separate them.

Is there a specific problem you are trying to solve? I'm not sure what you're getting at with your question. Could be a language barrier.
 

Attachments

J

James Gutherson

#5
My interpretation of the question is, 'Besides the requirements detailed in ISO9001:2K for product realization, ie contract review, customer communication, design and development control, puchasing, production and service control, indetification, traceability, customer property, packaging, measuring and monitoring, do you need to document how you actually build the widgit/provide the service?'

My thoughts are that you should forget about structuring your system just to match the format of ISO9K:2K (though it is much better than ISO9K:1994) and just document the way you do business now, then match what you have documented with the requirements of ISO in a matrix (probably with some explanation), then fill in the gaps (we have to add quite a bit for customer contact and satisfaction).

I hope that is on track, feel free to shoot me down if not.
 
P

Paes Mendes

#6
Originally posted by Paes Mendes:
Mark:
thank You for your help, and the material sended.
Your point of view confirms what i think about the spirit of ISO 9000:2000.
For me the idea is not to convert the requirements of ISO 9000:94 in isolated processes and describe them, but to clear identify, describe and keep in control the Processes that allow the Organization to produce the products now and in the future.
In this sense, i think that for instance traceability is only a procedure (that can be translated as a process), but is only a support process.
Correct?
Thank you again.
 
Thread starter Similar threads Forum Replies Date
I Realization processes input into overall risk ISO 14971 - Medical Device Risk Management 2
A Planning of Realization Processes - Setting Quality Objectives - ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
J API Q1 - 5.7.1.5 - Validation of Processes for Production and Servicing Oil and Gas Industry Standards and Regulations 4
J Run Down Adapters Calibration Processes General Measurement Device and Calibration Topics 4
S ISO 9001 Quality Management System and its processes ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
B Establishing topics for IATF internal audit processes Internal Auditing 9
M Minimum/ mandatory core processes AS9100 Process Maps, Process Mapping and Turtle Diagrams 6
Sidney Vianna Informational ISO/TS 10020:2022 Quality management systems — Organizational change management — Processes Other ISO and International Standards and European Regulations 0
Q Training Machinists on Company Processes Training - Internal, External, Online and Distance Learning 6
S Control plan for "highly automated processes" FMEA and Control Plans 3
H Mapping QMS+business processes in a medical device with class I and IIa+b Process Maps, Process Mapping and Turtle Diagrams 3
D 8.5.1.2 Validation and control of special processes requirements for Heat Treat External Processor AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
Sidney Vianna A young Steve Jobs take on Quality, Marketing & Business Processes. Coffee Break and Water Cooler Discussions 0
Stoic Details of Operational Qualification (OQ) test design for plastic extrusion processes, effect of material property noise, and GHTF/SG3/N99-10 US Medical Device Regulations 2
C Can I apply First Time Yield (FTY) for several products or processes of different nature? Manufacturing and Related Processes 5
R Develop scalable, sustainable processes ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
qualprod Is it worth to document all the processes? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
K Processes interaction of QMS Process Maps, Process Mapping and Turtle Diagrams 4
H Streamlining audit response and corrective action processes ISO 13485:2016 - Medical Device Quality Management Systems 9
R Validation of processes Oil and Gas Industry Standards and Regulations 2
ernieto Outsourced Processes Quality Agreements ISO 13485:2016 - Medical Device Quality Management Systems 4
N Change Control for processes & products Manufacturing and Related Processes 7
B Where do the definitions of the types of processes come from? IATF 16949 - Automotive Quality Systems Standard 9
D IATF PROCESSES IATF 16949 - Automotive Quality Systems Standard 2
R Role of QA during Design and Development of Products and Processes Design and Development of Products and Processes 4
N Validation of special processes - thread closed Oil and Gas Industry Standards and Regulations 3
E Any template/ form of Monitoring and Measurement of Processes and product to ISO 13485? ISO 13485:2016 - Medical Device Quality Management Systems 1
validationspec How to Validate the Automated Processes (CNC Lathe and Milling)? ISO 13485:2016 - Medical Device Quality Management Systems 5
H Existing cloud based medical device - questions regarding improving the processes IEC 62304 - Medical Device Software Life Cycle Processes 6
armani Internal audit plan and processes for ISO 14001:2015 ISO 14001:2015 Specific Discussions 3
A IRIS audit - Discussion about Special Processes General Auditing Discussions 11
S Can outsourced processes be excluded from QMS scope? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 14
C Capability in sewing processes CP,CPk,PP,PPk Capability, Accuracy and Stability - Processes, Machines, etc. 10
J Informal vs formal scope creep... managing non-medical devices through system processes ISO 13485:2016 - Medical Device Quality Management Systems 2
S MDR - System and procedure pack article 22 and all sub processes that apply ISO 13485:2016 - Medical Device Quality Management Systems 0
Q Process description for outsourced processes ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
normhowe "The Problem with Quality Management: Process orientation, controllability and zero-defect processes as modern myths" Book, Video, Blog and Web Site Reviews and Recommendations 2
K PDCA cycle and ISO processes alternative model Quality Management System (QMS) Manuals 14
Q Swimlane von Prozessen - Swim lane of processes Process Maps, Process Mapping and Turtle Diagrams 16
H AS9100D clause 8.5.1 f) & 8.5.1 g) - Special Processes AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
John C. Abnet ISO 9001 4.4.1 "...shall determine the processes needed..." ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 72
P SPC for machining processes Capability, Accuracy and Stability - Processes, Machines, etc. 1
L Special Processes for SERVICES AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
DuncanGibbons Additive Manufacturing Processes Thread Manufacturing and Related Processes 6
B Do you use paper or web-based templates for CAPA processes? ISO 13485:2016 - Medical Device Quality Management Systems 3
L Purge - Injection Molding Processes Manufacturing and Related Processes 5
M Is Validation of Plating Processes required and who is responsible? Qualification and Validation (including 21 CFR Part 11) 11
Stoic Manual soldering processes - 100% verifiable, or always requiring validation? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 15
BeaBea How Many Processes should be created for each Department? Process Maps, Process Mapping and Turtle Diagrams 5
S How do you record your Nonconforming product? Batch production of staged processes Nonconformance and Corrective Action 2

Similar threads

Top Bottom