Product Development Lead Time with respect to APQP

H

hkrishnan1983

#1
Can anybody give specific answer to my below questions w.r.t APQP?

1. In phase-2: what is the difference between design verification and design review? what should be verified and reviewed?

Pls explain in detail specifically...

2. During Team feasibility commitment, apart from Cpk requirements(1.33) what other requirements has to be discussed with supplier?

Pls list out specifically...

3. Important question:
If the customer has not mentioned the Program need dates (PND), then what is the APQP lead time? if there is no standard, what is the maximum lead time that we can take it up for product development?

4. After completing APQP activities and product quality sign-off, is there any procedure or process is there to review APQP again? if yes, what is the frequency and what has to be reviewed?

Pls clarify my above questions.

Thanks, Hari
:confused:
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
D CE Marking Requirements MDD & MDR - new product development covered under same scope EU Medical Device Regulations 1
I ISO-9001:2015 - direction on New Product Development? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
V Product Development - When to start calculating Process Capability Capability, Accuracy and Stability - Processes, Machines, etc. 3
F Development Meeting with the FDA - Approval Pathway for a Combination Product 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
M Is a confirmation trial is obligatory in development of a product? Design and Development of Products and Processes 3
M Is a confirmation trial obligatory in development of a product? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
L Medical Device New Product Design & Development- How long does this process take you? Other Medical Device and Orthopedic Related Topics 1
S Product Development and Prototyping Company - Nonconforming material or not? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
V Examples of Design and Process FMEA for Pharmaceutical Product Development ISO 14971 - Medical Device Risk Management 7
I IQ & OQ Requirements for New Product Development Equipment Qualification and Validation (including 21 CFR Part 11) 3
T Process Validation, NPD (New Product Development), and Supplier Management Qualification and Validation (including 21 CFR Part 11) 7
K Product Realization in 'Training' - 7.3 Design And Development Exemptions ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 23
R Role of Product Development in OSHAS 18001 Occupational Health & Safety Management Standards 6
V Examples of Risk Assessment (FMEA) through the Life Cycle of the Product Development ISO 14971 - Medical Device Risk Management 16
G Defining Quality Objectives for Product Realization and Design and Development AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
V Any examples of Value Stream Mapping (VSM) for Product Development Processes (PDP) ? Six Sigma 3
V Measurement of Robustness of Product at Development Phase Six Sigma 2
M Measuring Personnel Performance in a Product Development Laboratory Design and Development of Products and Processes 1
V Defining Quality Assurance's Role in R&D (Product and Process Development) Design and Development of Products and Processes 11
M NPDI (New Product Development & Introduction) Examples needed Excel .xls Spreadsheet Templates and Tools 3
M ISO 9001 Certified Education Company - Defining the Product & Design and Development ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
P PDP (Product Development Process) and APQP Process Map APQP and PPAP 3
M SOPs for a new Cosmetic Product Development Laboratory Calibration Frequency (Interval) 1
michellemmm Software Product Development Quality Assurance (PDQA) Audit Checklists Software Quality Assurance 12
T Lessons Learned in a Product Development Project Quality Tools, Improvement and Analysis 2
C Product Development Policy and Process ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
K Generic Product Development Documents that need Analysis in a Complaint Investigation Problem Solving, Root Cause Fault and Failure Analysis 2
A What is the Responsibility of QA in the Product Development Process? Design and Development of Products and Processes 8
R Setting Departmental Objectives - Product and Process design & development IATF 16949 - Automotive Quality Systems Standard 2
5 What are your thoughts on my NPD (New Product Development) process map? Process Maps, Process Mapping and Turtle Diagrams 17
J Ford GPDS, APQP, Product & Process Development Plans, Purchasing Department Processes Customer and Company Specific Requirements 1
B New Product Development and Introduction Manual Manufacturing and Related Processes 5
T Applying Lean Tools in Product Development Lean in Manufacturing and Service Industries 2
E Product Development - Quality Manual - Subdivision of a global company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
P For business performing PRODUCT DEVELOPMENT ONLY, what is best QMS for certification? Quality Manager and Management Related Issues 2
P For a PRODUCT DEVELOPMENT ONLY organization, which certification is more appropriate? ISO 13485:2016 - Medical Device Quality Management Systems 5
Q Searching for TOYOTA product development system (Toyota Production System) Customer and Company Specific Requirements 9
L Product Design and Development - How do I know if Clause 7.3 applies? Design and Development of Products and Processes 4
K Product Development Management System (PDMS) that's too complex. Manufacturing and Related Processes 4
J R&D Product Development Management Misc. Quality Assurance and Business Systems Related Topics 8
E Lean Product Development Material - Basics of Lean Lean in Manufacturing and Service Industries 5
T NPD - New Product/Process Development Quality Forum Book, Video, Blog and Web Site Reviews and Recommendations 13
L Product Samples related to Design And Development Design and Development of Products and Processes 12
B Process Measure for Product Development ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 17
P New product Design & Development for automotive requirements - Documents required Design and Development of Products and Processes 4
S Product Development Program - Design, develop, approve and manufacture new products Design and Development of Products and Processes 6
S Design and development skills - No responsibility for product design and development Design and Development of Products and Processes 3
J Help! Need sample procedures for Product & Software Design and Development Design and Development of Products and Processes 4
C Design and Development Process vs. Product Design and Development of Products and Processes 10
D Risk assessment & Product development - All products - Medical device or not? ISO 13485:2016 - Medical Device Quality Management Systems 20

Similar threads

Top Bottom