SBS - The best value in QMS software

Product Status Identification after receiving inspection?

GStough

GStough

Staff member
Super Moderator
#11
#11
Re: Product Status Identification - How to?

rharold said:
GStough,

If it goes directly into stock then it isnt inspected at all. I dont think that would work. However, having it setup so when it is in stock, makes it "acceptabe product" does seem reasonable. I am not sure if that would take care of making sure that its "status" is identified. I think it depends how you look at it, much like a lot of other things.
Click to expand...
Your original post seemed to imply that inspection already was being done, so my thought was that product passing inspection would be placed directly into stock, and NC product sent to quarantine. I apologize for any confusion caused my assumption.
 
Free Trial of DISCUS Desktop
Elsmar Forum Sponsor
V

vanputten

#12
#12
How do you know the material has gone thourgh the following steps? "They go into a hold area and after being cleared to the PO, go to stock."

The answer to the above question may also be the evidence of the product's status. Location can be a status identifier.

Regards,

Dirk
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
M Reagent Status Identification - 7.4.3 Verification of Purchased Product ISO 13485:2016 - Medical Device Quality Management Systems 6
M Practical Guidance on TS 16949 Clause 7.5.3 - Product Status Identification IATF 16949 - Automotive Quality Systems Standard 3
G Identification of Product Status in Assembly and Test Areas ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
A Product status has changed from "tested" to "listed" in the EU Pharmacopoeia EU Medical Device Regulations 1
S Form to identify status of product on the production floor. IATF 16949 - Automotive Quality Systems Standard 5
D Finished product visual status - Each box must have a QC status identifier? ISO 13485:2016 - Medical Device Quality Management Systems 1
B Product ID, Inspection and Test Status, - QS9000 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
H Medical device Product Registration Registrars and Notified Bodies 2
A Can a power Supply be an accessory to a medical device, if it is an 'off-the-shelf' product. IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
M Extension to shelf life of new product under MDR EU Medical Device Regulations 1
lanley liao Are there guidelines for application of all API monogrammal product? Oil and Gas Industry Standards and Regulations 2
S ISO 11137- Simulated product vs SIP Other Medical Device Related Standards 2
K "World Class Product" based QM. I need advice. Quality Management System (QMS) Manuals 14
R IATF 16949 Certification for new site with transferred product--what is the impact with CSR and scorecards? IATF 16949 - Automotive Quality Systems Standard 0
William55401 Distributed By Product - Best Practices for Configuration Management and Purchasing Controls ISO 13485:2016 - Medical Device Quality Management Systems 0
R Compatibility studies - combination product CE Marking (Conformité Européene) / CB Scheme 4
R Compatibility studies - Medicinal Product and Medical Device Other ISO and International Standards and European Regulations 0
J Marking "Distributed By" to product with distributors' reference-code EU Medical Device Regulations 3
dinaroxentool Selling a product in Both UK and EU after Brexit UK Medical Device Regulations 9
P EU MDR Translation of Product Name EU Medical Device Regulations 0
N Is this a single integral drug device combination product EU MDR CE Marking (Conformité Européene) / CB Scheme 1
V New Product Model CE Mark Certification under MDR EU Medical Device Regulations 0
Sidney Vianna Informational APQP4Wind - Advanced Product Quality Planning for the Wind Power Supply Chain APQP and PPAP 3
K 510k FDA review, will they accept Biocompatibility result generated using feasibility product lots? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
G Adopting old product - compliance with IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 9
S How long does it take to register a product with MHRA? UK Medical Device Regulations 4
D Classification of product for clinical trials EU Medical Device Regulations 14
N Adding unclassified product to the medical device registration US Food and Drug Administration (FDA) 1
B Internal Auditor Competency - Product Auditors Internal Auditing 9
T PFMEA and Control Plans on legacy product FMEA and Control Plans 5
P FDA Approved Product Contact Parts ISO 13485:2016 - Medical Device Quality Management Systems 6
S AS9120B - 8.5.2 Delivering Split Product AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
S Classification of a product according to MDR EU Medical Device Regulations 3
optomist1 Informational Training IMDS - Management of Product Chemical Regulatory Compliance RoHS, REACH, ELV, IMDS and Restricted Substances 2
L AS9100 - Product and Service Provision 8.5.1q AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
J 1.11 Preliminary Identification of Special Product and Process Characteristics APQP and PPAP 4
J Possible to get ISO 13485 certified with only OEM Product? ISO 13485:2016 - Medical Device Quality Management Systems 4
Felony Melony New Product Launch - Safe Launch Customer and Company Specific Requirements 1
Marcel DS How do I know if my product is required be RoHS certified? REACH and RoHS Conversations 6
I Control Plan (Product/Process specification/ Tolerance) acceptance FMEA and Control Plans 27
DuncanGibbons Technical Data Package vs Digital Product Definition APQP and PPAP 0
A ISO 11135:2014, B.1.4, BI resistance x product bioburden ISO 13485:2016 - Medical Device Quality Management Systems 6
Sravan Manchikanti How to interpret '8.3 Control of nonconforming product' for SaMD device while implementing ISO 13485 & MDSAP ISO 13485:2016 - Medical Device Quality Management Systems 7
R Product Recall - medical devices in the hospital warehouse Canada Medical Device Regulations 2
A Software bug fixes after shipping a product EU Medical Device Regulations 3
silentmonkey How to measure severity if my product is designed for emergency use and failure would result in death? ISO 14971 - Medical Device Risk Management 9
D IATF16949 7.5.3.2.1 Record Retention - Our Product or Customer Product? Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 1
H Operational planning and product and service provision when things happen so fast ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
T Letter to file for Product Certification CE Marking (Conformité Européene) / CB Scheme 0
J Scope of ISO 9001 clause 10.2 in the product life cycle ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2

Similar threads

Top Bottom