Definition Production Ramp-Up Activities - Nissan Definition of

S

SilverHawk

#1
I shall be very grateful and appreciated most if osmeone will help me out with this Nissan terminology - Ramp-up activities. I have read about the ramp-up process but I am not too sure what do Nissan what us to write and describe under the Ramp-Up activity.

Pls. help!!
 
Elsmar Forum Sponsor
G

Greg Maggard

#2
IS Nissan TS16949 any where in the world yet? Who are the TS16949 Big Auto Makers if any. Could I get a run down on that? :bigwave:
 
S

SilverHawk

#3
Hi Greg,

According to AIAG new article, you may find out there are several BIG AUTO makers and their customer specific requirements being established. Pls. take a look at the run down list.

Yet, I have come again this Nissan or Renault is using this term, Ramp-up" and I am still figuring out what do they really mean?

Any helps?
 

Attachments

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#5
Production Ramp Up

SilverHawk said:
I shall be very grateful and appreciated most if osmeone will help me out with this Nissan terminology - Ramp-up activities.
I think this is the scoop:

As you go through what the 'Big 3' call APQP, you reach a point where actual production begins. You start out pushing a few cars through the line to test the line. During that change of phase from when the first cars (or whatever) go through the line - even for line testing, to a month or more after actual production began in ernest, there is a lot of troubleshooting and problem solving as reality comes into play.

The bottom line is throughput starts out slow and builds momentum as the manufacturing / assembly process is debugged and optimized. All of this is ramp up to (hopefully - the reason for a defined APQP process) a predicted (planned) output.

Greg Maggard said:
IS Nissan TS16949 any where in the world yet?
Not to my knowledge. Anyone else?
Satellite said:
Can anyone tell me what the new Nissan website is for their CSR's? The published one keeps coming back as invalid.
Anyone on this?
 
M

Morcs74

#7
Nissan Ramp up?

Apparently the plant in Barcelona has been 'Ramping up' Since last year, i assume it is them reaching full capacity as they are now 24hr working i believe. Their orders have not increase all that much though...

Anyone else has problems with Nissan's order forecasts? we get them in advance and the confirmed order though EDI 3 days before shipping , theyve more than doubled the orders from the forecast in the past.

Id expect better from plant of that size.
 
Thread starter Similar threads Forum Replies Date
Techilady Ford Special Characteristics Communication and Agreement Form (SCCAF) provides production requirements? FMEA and Control Plans 4
thisby_ Post Market/Production Risk Assessment ISO 14971 - Medical Device Risk Management 0
Felony Melony Project Milestone Plan-Development to Mass Production APQP and PPAP 2
M Difference between "Production Trial Run" and "Run at Rate" IATF 16949 - Automotive Quality Systems Standard 8
M Material incoming to the production process reflected in PFMEA FMEA and Control Plans 9
C Scrapping on production floor - Setup parts 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
G Dealing with non conformity caused by Supplier Components detected in the production line IATF 16949 - Automotive Quality Systems Standard 14
T IATF Rules for sharing production space with another company IATF 16949 - Automotive Quality Systems Standard 10
qualprod Best practice to ensure inputting of data in production Lean in Manufacturing and Service Industries 19
R Monitor production quality - Internal KPIs Manufacturing and Related Processes 5
E Routine production tests - dielectric voltage withstand test IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
P Conformity assessment based on a quality management system or production quality assurance EU Medical Device Regulations 3
Anonymous16-2 Dietary Supplement Raw Material/Component Storage and Production Manufacturing and Related Processes 1
L Significant Production Run - How 300 was determined to be the minimum quantity APQP and PPAP 2
Q ISO 9001 8.5.1 - Control of production and service performance ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
C Production and Post Production feedback - ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 4
DuncanGibbons How is the arrangement between Design and Production organisation envisaged? EASA and JAA Aviation Standards and Requirements 4
J Production Line Test Brasil - High Voltage Dielectric Strenght Test Other Medical Device Regulations World-Wide 5
J Iterative design and production for custom made products ISO 13485:2016 - Medical Device Quality Management Systems 3
M Production approval testing - Alternative ideas for Validation Reliability Analysis - Predictions, Testing and Standards 4
S How do you record your Nonconforming product? Batch production of staged processes Nonconformance and Corrective Action 2
A When there is a 2 year lapse in production, is a full FAI required? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
P Definition of production tooling in IATF16949 clause 8.5.1.6 IATF 16949 - Automotive Quality Systems Standard 4
Moncia Production Planning procedure ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
D Pre-Production Capability Assesment Reliability Analysis - Predictions, Testing and Standards 5
N Calibration Requirements for Production Equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
A Production of raw materials in university labs? Lean in Manufacturing and Service Industries 11
D How long should we keep the spare parts available for our medical device, after we have stopped the production? ISO 13485:2016 - Medical Device Quality Management Systems 0
V ISO 9001: 2015 Production drawing Control ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
D Determining Calibration Frequency schedule for items used in production Manufacturing and Related Processes 2
T Customer audit demands - that I state in my QM who can shut down production AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 14
R IATF 16949 Clause 8.5.1.6 a) maintenance and repair facilities - Production tooling management and personnel IATF 16949 - Automotive Quality Systems Standard 4
Ed Panek Bringing Production In house ISO 13485:2016 - Medical Device Quality Management Systems 10
Q IATF 16949 certification without automotive products in "production" IATF 16949 - Automotive Quality Systems Standard 5
Ed Panek Small Medical Device company - Bring production in-house ISO 13485:2016 - Medical Device Quality Management Systems 1
Mr Skeleton PV (Production Validation) test plan responsibility APQP and PPAP 21
D Valeo 5 Axes and VPS (Production System) Lean in Manufacturing and Service Industries 1
C Medical Device Stability Studies - Non-validated pilot production Other Medical Device Related Standards 1
Ed Panek Moving from Contract Manufacturing to Production In-House ISO 13485:2016 - Medical Device Quality Management Systems 3
andika_untoro What are a good Critical to Quality (CTQ) metrics for a biotech manufacturing production? Lean in Manufacturing and Service Industries 0
Ed Panek Bringing Production in house from Contract Manufacturer ISO 13485:2016 - Medical Device Quality Management Systems 3
L Why is initial production units, lots, or batches, or their equivalents required for Design Validation? US Food and Drug Administration (FDA) 3
chris1price MDR Conformity Assessment for a Class 2a device - Production Quality Assurance EU Medical Device Regulations 2
Ed Panek Observational Audit of Contract Manufacturer Production ISO 13485:2016 - Medical Device Quality Management Systems 5
P AS9102 full FAl or a partial FAI after production inactivity period AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
Sidney Vianna AS9100 News PPAP in the Aerospace Sector - What is it? AS9145 - Requirements for Advanced Product Quality Planning and Production Part Approval Process AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
W AS9120B 8.5.1 Control of Production and Service Provision AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
N In-Process Production Test Stations in PFMEA (Process FMEA) FMEA and Control Plans 18
qualprod Methods to Calculate Available Production Rate ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 0
T Logic that determines what production testing is needed ISO 13485:2016 - Medical Device Quality Management Systems 2

Similar threads

Top Bottom