Production run inventory sell-by expiration date?

#1
My question may seem to have an obvious answer but I don't have that answer. How long can ppap'ed parts from original production run be sold? If a large volume remains in inventory because, say, projected customer releases slow down and the remaining inventory ages, how long can those original parts be sold to the customer?
The customer is still requiring annual revalidations but the parts are older than a year, production -wise. Any feeback?
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
M Difference between "Production Trial Run" and "Run at Rate" IATF 16949 - Automotive Quality Systems Standard 8
L Significant Production Run - How 300 was determined to be the minimum quantity APQP and PPAP 2
J Design Control - Can Validation be based on a limited/first Production Run ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
W AS9100 Clause 8.5.1.3 Production Run Verification AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 14
M Standardized P Chart for Short Run Production Statistical Analysis Tools, Techniques and SPC 13
E What's the difference: AIAG-PPAP's "Significant Production Run" and "Run @ Rate"? APQP and PPAP 11
S Should PPAP Samples Come from a Production Run? APQP and PPAP 3
W Production Trial Run in AIAG APQP and Run at Rate (GP-9) GM 1927 APQP and PPAP 2
CalRich Retention of First Piece from each Production Run IATF 16949 - Automotive Quality Systems Standard 11
O Significant Production Run - 2.1 in Section 2 of the PPAP Manual fourth edition APQP and PPAP 3
M Production Trial Run Checklist or PV Build Checklist wanted APQP and PPAP 3
S PPAP - Production Run Quantities, Number of Subgroups and Subgroup Size APQP and PPAP 2
G Requirement to follow Control Plan for serial production in a PPAP run APQP and PPAP 4
G Production rate demonstration? APQP Manual 4.1 ? Significant Production Run APQP and PPAP 7
T What is Average Run Length & Average Production Length when used in Control Charts? Statistical Analysis Tools, Techniques and SPC 4
A Production Trial Run/ Production Proveout Methodology and Key Checkpoints APQP and PPAP 6
S PPAP Process Requirements-Significant Production Run APQP and PPAP 13
B EO Production Batch Failure ISO 13485:2016 - Medical Device Quality Management Systems 1
B How to satisfy clause 5.7.1.5 process validation for valve production API 6D Oil and Gas Industry Standards and Regulations 13
B Documents for production process IATF 16949 - Automotive Quality Systems Standard 8
Watchcat When to begin putting together postmarket production QMS for a mobile app? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 13
H Production Validation- CE Mark ISO 13485:2016 - Medical Device Quality Management Systems 3
S Wooden Pallets in Production Clean Room Food Safety - ISO 22000, HACCP (21 CFR 120) 5
A Production line for medical devices Other Medical Device Related Standards 1
O PPAP'ed part manufacturer has discontinued production Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 7
I Static Mixer on Solution production Mixer Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0
A Traceability unequal lots/batches delivery production IATF 16949 - Automotive Quality Systems Standard 8
qualprod Setup time only at starting production? Lean in Manufacturing and Service Industries 5
J ISO 9001:2015 Clause 8.5.1 Control of Production and service provision - Help with Work Instruction Access ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
DuncanGibbons Pre FAI production terminology AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
C Validation of process for production and servicing 5.7.1.5 API Spec Q1, 9th Edition Oil and Gas Industry Standards and Regulations 9
A ISO 9001 Internal Audits - No production right now due to furloughs Internal Auditing 5
DuncanGibbons Process flow & PFMEA for production planning and simulation activities? Process Maps, Process Mapping and Turtle Diagrams 7
D 6.1.2.3 Contingency Plan - Dispositions to restart production after an unplanned stoppage IATF 16949 - Automotive Quality Systems Standard 3
S Production Work Order Procedure 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
Techilady Ford Special Characteristics Communication and Agreement Form (SCCAF) provides production requirements? FMEA and Control Plans 4
thisby_ Post Market/Production Risk Assessment ISO 14971 - Medical Device Risk Management 0
Felony Melony Project Milestone Plan-Development to Mass Production APQP and PPAP 2
M Material incoming to the production process reflected in PFMEA FMEA and Control Plans 9
C Scrapping on production floor - Setup parts 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
G Dealing with non conformity caused by Supplier Components detected in the production line IATF 16949 - Automotive Quality Systems Standard 14
T IATF Rules for sharing production space with another company IATF 16949 - Automotive Quality Systems Standard 10
qualprod Best practice to ensure inputting of data in production Lean in Manufacturing and Service Industries 19
R Monitor production quality - Internal KPIs Manufacturing and Related Processes 5
E Routine production tests - dielectric voltage withstand test IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
P Conformity assessment based on a quality management system or production quality assurance EU Medical Device Regulations 3
Anonymous16-2 Dietary Supplement Raw Material/Component Storage and Production Manufacturing and Related Processes 1
Q ISO 9001 8.5.1 - Control of production and service performance ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
C Production and Post Production feedback - ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 4
DuncanGibbons How is the arrangement between Design and Production organisation envisaged? EASA and JAA Aviation Standards and Requirements 4

Similar threads

Top Bottom