Profiles User Titles and Stuff Like That

Elsmar Forum Sponsor

Kevin Mader

One of THE Original Covers!
Leader
Admin
#2
Da Cheech Wizard,

I kind of like the informal touch. I agree, 'Junior Member' gives me the wrong impression too.

Marc, I like the modifications you have been making to your site. I also noticed that the enrollment dropped from 324+ to 272. Were they idle accounts, or the folks known as the "Lurkers"?

Kevin
 
D

Dusty

#3
Kim,
If you were to go to your profile....at the top of the page that comes up it has a search for all posts by that mem...uh, lurker...;-)

Also noticed the drop in members...

------------------
Dusty Rhoads
(Chief Dummy)
 
#4
Check it out....I've been promoted already!! Where's my raise?
hehehe

I had noticed that search engine, and actually had to use it to find out where I had posted once last week.

Not to worry, I'm now reading a book on how to improve my memory, and will try not to have this difficulty in the future... :)


Kim
 

Marc

Fully vaccinated are you?
Leader
#5
The forum has been up for a while. When I upgraded software I also deleted a number of 'users' who, it was obvious, 'registered', stopped by once or twice and never came back. I am sure I missed a bunch (there is no 'last visited' information, which is a shame) - the 'members' number is relative. IF I was just trying to 'pump up' the numbers I would have left those 'phantom' users on the list - but - I'm more interested in approximate accuracy. In all honesty I don't believe there are more than maybe 50 to 100 people who stop by on a regular basis.

As far as Kim's raise, well, Kim, I spoke with your boss and was told to tell you to stop by your boss's office and ASK nicely.... As far as your memory, if you are a child of the '50's or 60's (or earlier), you're forgiven. If not you have no excuse.... wink.gif

[This message has been edited by Marc Smith (edited 03-22-99).]
 
#6
I can tell you're not telling the whole truth here....because my boss was in California today at a convention. :p

Although I am due for a review....and he'll be back tomorrow....

As for my excuse....I'm not telling you which decade I was born in....women's perogative smile.gif Or was that changing my mind.....

Off to the homestead....later, all

Kim
 

Marc

Fully vaccinated are you?
Leader
#7
Ummm, lets see. You used the word 'women' so ya have to be late thirtys or older... So - we're closing in!

Have you stopped by your boss's office to SEE for sure no one is there??? Hmmmm???
 
#8
bookmarks

Hello, all

First I'd like to know how I went from "Junior Member" to "Lurker"....but that's not why I'm here. smile.gif

Is there a way that I don't know about to check where it was that I last posted? I come back here and have to try to remember what subject and all I posted under. It can take quite awhile for me to try to trace back, but maybe it's just because I'm new. If it isn't just because I'm new, I'd like to see something where the forum will tell you where you last posted, or where all your posts are.

I don't even know if I'll be able to find this post again.....

Thanks!
Kim

[This message has been edited by Kim (edited 03-23-99).]
 

Marc

Fully vaccinated are you?
Leader
#9
The software was changed out over the weekend and we went to Lurker from Junior Member as Junior sounded so - well - I didn't like it. Lurker means you are registered but have less than 5 posts - so at best fo far you are 'lurking' (not significantly contributing). After about 5 posts you wil become a 'Contributer'. Forum Moderators are 'Local Wizards' and I (the overall administrator) am 'Da Cheech Wizard' (from Vaghn Bode's comic stip in the early to mid- 1970's).

So far identifying one's posts has not been brought up as a problem - but if you want to see your posts, go to the forum search engine and put in your name and do the search. There you have it!
 
#10
So....if I hurry and post three more times I'll be promoted?? I wish it were that easy here at work!!!

Thanks!
Kim
 
Thread starter Similar threads Forum Replies Date
E Solder thermal profiles for PPAP - Automotive IATF 16949 - Automotive Quality Systems Standard 1
Marc Hackers Scrape LinkedIn Member Profiles After Work and Weekend Discussion Topics 12
C Measurement System to measure Hole Diameters, True Positions, Surface Profiles, etc General Measurement Device and Calibration Topics 4
R Capability for CMM Scanned Profiles on a feature with a Bilateral Profile Tolerance Capability, Accuracy and Stability - Processes, Machines, etc. 26
Marc Facebook Profiles Now cross-referenced with retail purchases! After Work and Weekend Discussion Topics 3
P Capability & GDT Features - Surface Profiles, Line Profiles & Symmetries Capability, Accuracy and Stability - Processes, Machines, etc. 3
B Surface Profile Callouts - How the profiles are being dimensioned Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
A Customer Profiles - Creating a Customer 'Profile' for our Top 10 Customers Document Control Systems, Procedures, Forms and Templates 2
X Fanuc Injection Moulding Machine - Variable stage speed/pressure injection profiles Manufacturing and Related Processes 1
M 3D Math Data, GD&T and FAI - My issue lies more with Profiles APQP and PPAP 45
A SPC, Customer Specific Requirements and Characteristics on Profiles? Statistical Analysis Tools, Techniques and SPC 3
James Robin How do I track user in saas Process Audits and Layered Process Audits 1
M Process Flow of ECN Product User and Service Guides Process Maps, Process Mapping and Turtle Diagrams 1
Q EU Local Language Requirements for Operator Or User Manuals CE Marking (Conformité Européene) / CB Scheme 1
S Labeling; User Guide US Food and Drug Administration (FDA) 4
T Software user interface - definition of hazards ISO 14971 - Medical Device Risk Management 15
S Requirements for ANSI Z540.3 Compliance as End User of Calibrated Instruments AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
G User Ejecting Lithium Battery from Device Other Medical Device and Orthopedic Related Topics 4
I User ID verification for in-house e-signature compliance Qualification and Validation (including 21 CFR Part 11) 2
J PQ Systems User Community information? Using GAGEpack Software 12
D Is an ethernet port part of the User Interface IEC 62304 - Medical Device Software Life Cycle Processes 5
Z Choice of PTC heater voltage to maximize user safety and ease of CE compliance to LVD CE Marking (Conformité Européene) / CB Scheme 0
Brizilla User Profile - How do I edit my profile info? Elsmar Xenforo Forum Software Instructions and Help 6
T Documenting hazardous situations associated with user/patient population ISO 14971 - Medical Device Risk Management 3
A The refund of 510(k) user fee Medical Device and FDA Regulations and Standards News 0
A User interface Language Requirements - EU MDR EU Medical Device Regulations 1
S User evaluation for self monitoring blood glucose test systems US Food and Drug Administration (FDA) 4
P Equipment 21 CFR 820.70(g) - User Requirements Document for Off the shelf equipment 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 7
S Forced ServiceNow validation - No change in our current user and functional requirements IT (Information Technology) Service Management 4
D Software User Interface Languages for LVD and IVD CE Marking (Conformité Européene) / CB Scheme 2
Q User Requirement Specification for HR (Human Resource Management System) Manufacturing and Related Processes 1
P Electrosurgical Device User Need: Cord Flexibility -> Requirement Other Medical Device and Orthopedic Related Topics 4
S Recommendation for user friendly Gaga R&R and Cpk software Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
B ISO 11607-1 for surgical instruments sterilized by end user Other Medical Device Related Standards 1
M User manual / instructions for use for class II device always required? Medical Device and FDA Regulations and Standards News 3
D Do User Manuals (Not Device Labeling) HAVE to be in their national languages for these countries? Will English Hardcopy not do? EU Medical Device Regulations 12
Q Cassette Representation - GUI (Graphical User Interface) on my medical device - A mammography Device Other Medical Device Related Standards 0
R Medical device software without user interface Other Medical Device and Orthopedic Related Topics 5
F EUDAMED UDI Medical Devices User's Guide Medical Device and FDA Regulations and Standards News 7
M Informational US FDA Medical Device User Fee Rates for Fiscal Year 2020 Medical Device and FDA Regulations and Standards News 0
K EU MDR Art. 22 - Device + insertion pack - User manual and Labeling EU Medical Device Regulations 4
G Posting Measuring Equipment Accuracy for User Information General Measurement Device and Calibration Topics 4
M Does ISO 13485 or MDR require you to state the origins of customer requirements or user needs? Design and Development of Products and Processes 2
V Sequence of performing risk assessment: User_FMEA (User Errors) vs Design Inputs FMEA and Control Plans 1
Ed Panek Splitting UI (User Interface) into two development paths 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
R Publication of user information in manufacturer website for medical devices Other Medical Device Regulations World-Wide 2
Ed Panek User Feedback both negative and positive and acting upon those metrics 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
P Detection rating for a user (surgeon) related failure mode in DFMEA APQP and PPAP 3
Marc Search - Search for Discussion Threads started by a specific User Elsmar Xenforo Forum Software Instructions and Help 0
Marc Search for Posts - By specific User Name(s) Elsmar Xenforo Forum Software Instructions and Help 1

Similar threads

Top Bottom