pharmarton

Inactive Registered Visitor
#1
Hello everyone!!
I have read through all of the 7.3.6.2 and APQP regards points to prototype bulild process and I created a process map.
Could anyone out there give me some feedback or thoughts about yhr map?
:thanks:
Pharmaton
 

Attachments

AndyN

A problem shared...
Staff member
Super Moderator
#2
Re: Prototype build process

Hello everyone!!
I have read through all of the 7.3.6.2 and APQP regards points to prototype bulild process and I created a process map.
Could anyone out there give me some feedback or thoughts about yhr map?
:thanks:
Pharmaton
Could you post this as a .pdf, since not everyone will have Visio?
 

Sturmkind

Inactive Registered Visitor
#3
Re: Prototype build process

Hi, pharmarton!

I took the liberty of scanning your flowchart and had a couple of questions:

If 'Automotive' = Y, then isn't a Team Feasibility needed before DFMEA or Control plan can be done?

After 'Create prototype samples' isn't a dimensional and/or appearance check needed before sending to the customer?

Otherwise, looks pretty good to me!
 

Attachments

pharmarton

Inactive Registered Visitor
#4
Re: Prototype build process

Thank for your ideas,
I included your suggestion in the APQP process map, but I forgot in the prototype. I attached a pdf file with these modifications, Thoughts???
Pharmaton
 

Attachments

kekoukele

Starting to get Involved
#5
hello, i have read your post.
1\ APQP用于新品开发
used for new production.
2\你需要认真阅读APQP手册,知道谁先谁后
you should read APQP reference manual clearly and know who first who after.
3、CP来源于DFMEA?PFMEA?FLOW CHART?
Does CP Origin DFMEA?PFMEA?Flow chart?
4、过程流程图在哪里?
Where is preliminary process flow chart?
5、MSA SPC 在哪里?
where is MSA? SPC?
6、特殊特性清单在哪里?
Where is special product and process characteristics.
just my viewpoint.
 
Top