Question regarding AQL - ISO 3951


Hallo everyone,
I have a question regarding AQL (ISO 3951 related) and possible software. I do not usually work with AQL, but have a question which should be answered based on AQL.
I have a screw with a Diameter of 2 mm. I have data aabout mean, SD etc. The acceptance criterion for the screw is one sided, the maximum diameter is crucial. The question is now, what diameter size is the maximum to discard 1% of the screws if I sample 100% of the produced screws - based on the screwdata I have.
Is there any spreadsheet which can answer me this question. For AQL I only find sample calculators for samples to pick during inspection etc.
I hope this is the correct subforum to ask this question
Top Bottom