Question Regarding MSA (Measurement Systems Analysis) - Pass / Fail Criteria tests

C

Carlosbiarge

#11
Re: Question Regarding MSA - Pass / Fail Criteria tests

Good Morning All

I have been trying to validate the formulas in Carlos' spreadsheet. There is a hidden sheet called calculations but it is passowrd protected. It does not have the same password as the other sheets. Does anyone have any info. regarding this. Carlos if you see this can you please let me know what the password is. This is a very good spreadsheet, but I still need to validate the formulas.
Dear All

I'm sorry not reply before, I have seen the ploblem today

The password is "bruna"

Best Regards

Carlos Biarge
 
Elsmar Forum Sponsor
#12
Re: Testing

Thanks for the quick answer. We do burn-in (hot, cold and ambient temps), and systems testing of chips, (parametric, speed, stress, basic functional) all of which are pass/fail. We also do characterization testing which actually measures the more exact values of parametrics and/or functional parameters. (Which is where I thought the MSA should come into play).

I am trying to limit MSA to only critical measurement functions otherwise if we did MSA on every peice of test and measuring equipment we have, we would be hard pressed to find the resources ($) to do it all.
Hi All

I'm also trying to set up GR & R for these measurement systems. The problem I see is, each time the test is performed on product, both the test leads and the product degrade. So, MAYBE we can pull off six tests on one part, but not nine (as suggested by the AIAG table). Also, accordingly,we have no such thing as a reference value. Can someone in the semiconductor industry (or otherwise experienced with destructive attribute testing) give some feedback on how you've worked around this issue? Thanks :confused:
 
Thread starter Similar threads Forum Replies Date
lanley liao Question regarding the calibration of monitoring and measure equipment. Oil and Gas Industry Standards and Regulations 0
D Question regarding "storage and distribution" ISO 13485:2016 - Medical Device Quality Management Systems 1
D Question regarding customer feedback process ISO 13485:2016 - Medical Device Quality Management Systems 3
D Question regarding ECO process, specifically for Life Science products and defining form fit and function ISO 13485:2016 - Medical Device Quality Management Systems 1
F ISO 13485 8.2.3 Reporting to regulatory authorities: Question regarding a procedure for this clause. ISO 13485:2016 - Medical Device Quality Management Systems 4
C Question regarding Quality Manual Content and Specificity ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
optomist1 Generic question regarding Two Way ANOVA Results Statistical Analysis Tools, Techniques and SPC 8
apestate Question on wording in DOD RFQ regarding ISO 9000 Various Other Specifications, Standards, and related Requirements 7
N ASME B89.1.13 question regarding Resolution and Maximum Permissible Error General Measurement Device and Calibration Topics 3
B Question regarding Mandatory Procedures and Manual AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
P Question in auditing regarding CAR (Corrective Action) Logs Internal Auditing 7
S Supplier Development Process failed - Question regarding sub-suppiler audits IATF 16949 - Automotive Quality Systems Standard 4
Q Question regarding O-ring application for water proofing a device Design and Development of Products and Processes 2
J Question regarding Device Master Records & Specification Developers 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
J Question regarding supplier approvals ISO 13485:2016 - Medical Device Quality Management Systems 12
J Cancellation of Specifications - Question regarding cancelled specifications Various Other Specifications, Standards, and related Requirements 3
ScottK ASME B&PVC Section VIII Div 1 question regarding "Seal" Various Other Specifications, Standards, and related Requirements 0
K Auditor's Question Regarding TS16949 Clause 7.5.2 - How vague can an auditor be IATF 16949 - Automotive Quality Systems Standard 18
S Question regarding document control - Control EVERY version of the same graphic? Document Control Systems, Procedures, Forms and Templates 5
A Question regarding TS16949 auditor rules 3.3 - Different auditors IATF 16949 - Automotive Quality Systems Standard 4
E Question Regarding OHSAS 18001 Occupational Health & Safety Management Standards 3
C Gauge R&R Question Using Minitab Software 1
J IATF 16949 Internal Audit question - Auditor's responsibility Internal Auditing 6
K Question on MDR classification EU Medical Device Regulations 4
D Question on equipment - when to use reference only or research only stickers ISO 13485:2016 - Medical Device Quality Management Systems 5
D Work Instruction Question ISO 13485:2016 - Medical Device Quality Management Systems 5
M Clinical Decision Support Software Question 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
John C. Abnet VDA 6.3 - Question 7.3 - "blocking of parts" VDA Standards - Germany's Automotive Standards 6
D Approved supplier list - Distributors question ISO 13485:2016 - Medical Device Quality Management Systems 6
D Equipment Register and PM question ISO 13485:2016 - Medical Device Quality Management Systems 2
D Calibration tolerance question using Pipettes Medical Device and FDA Regulations and Standards News 1
D Equipment Register related question ISO 13485:2016 - Medical Device Quality Management Systems 1
S Study sign off question / responsibilities ISO 13485:2016 - Medical Device Quality Management Systems 3
S Qualification question - ISO 13485 - Setting up a small lab Reliability Analysis - Predictions, Testing and Standards 2
M Question for Auditors - "Off the Record" Conversation? General Auditing Discussions 14
R Accelerated Aging - Creating test samples - Implantable medical device Question Other Medical Device Related Standards 4
A Question on Authorized Representative in Malaysia Other Medical Device Regulations World-Wide 3
D Limited Scope for second site Question? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
I ISO 2233:2000 Question - Medical Device Shipping/Transportation Validation Other ISO and International Standards and European Regulations 1
Anonymous16-2 Labeling Question (Dietary Supplements/Food) Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
T Question for: Cg & Cgk calculation General Measurement Device and Calibration Topics 3
N ASL Question for GitHub ISO 13485:2016 - Medical Device Quality Management Systems 6
hogheavenfarm GDT Flatness measurement question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
A Question on ISO 14001:2015 - Are annual audits required? ISO 14001:2015 Specific Discussions 11
dinaroxentool Question about FDA Classification of a Device 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
J Another DFAR question 252.225-7009 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
F Conflict Mineral Smelter Question RoHS, REACH, ELV, IMDS and Restricted Substances 8
R NRTL - Scope Question - Off-the-Shelf Plug In IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
D API 6A Certification Question Oil and Gas Industry Standards and Regulations 4
dinaroxentool Question about qualification as a medical device or accessory in Europe EU Medical Device Regulations 2

Similar threads

Top Bottom