Question regarding new VDA_AIAG fmea approach for process FMEA

AndrewK

Involved In Discussions
#1
Hello!
I was reading handbook for the new standard ,also looking several vebinars and even recieved some training about it, but now going to practical realisation of method- i realized one question that wasent appear before when we were with experts.
Normally processFMEA should cover all processes starting from incoming inspection or reciwing material on plant till shipment of final product.
in structure analysis now- how it should be reflected?
Can you give me any example of complete production process including preparation and non assembly processes?
for example- Pen assembly.
in most of trainings example wass including DFMEA for pen with including subsystem element as housing, refill, cup
and PFMEA example as only assembly operations without consideration incoming , delivery etc.- maybe just for simplifying explanation or it wasnt highlighted so obviously and was hidden somewhere

are they are on the same levels of focus elements or hierarchically we need to divide it on some blocks and link to correspondent DFMEA levels ?( product- sub product-component levels) because failure of storage process for example might be a cause on subsequent process sometimes.
Question might be stupid :) i'm not a big expert but i just want to hear some comments How you see it? what are your thoughts regarding it? Maybe some best practices could be explained?
 
Last edited:
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
J Question regarding classification of custom made device EU Medical Device Regulations 5
S Question regarding AQL - ISO 3951 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
D Question regarding PCR workstation Fume Hood upon first use ISO 13485:2016 - Medical Device Quality Management Systems 0
D ISO 13485--Question regarding performing calibrations in house. ISO 13485:2016 - Medical Device Quality Management Systems 13
L Question regarding "Customer Property" AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
T Noob question regarding sample size Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
Ron Rompen Question regarding CMM probe damage General Measurement Device and Calibration Topics 4
D Question regarding where "validations" fit according to ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 1
lanley liao Question regarding the calibration of monitoring and measure equipment. Oil and Gas Industry Standards and Regulations 3
D Question regarding "storage and distribution" ISO 13485:2016 - Medical Device Quality Management Systems 1
D Question regarding customer feedback process ISO 13485:2016 - Medical Device Quality Management Systems 3
D Question regarding ECO process, specifically for Life Science products and defining form fit and function ISO 13485:2016 - Medical Device Quality Management Systems 1
F ISO 13485 8.2.3 Reporting to regulatory authorities: Question regarding a procedure for this clause. ISO 13485:2016 - Medical Device Quality Management Systems 4
C Question regarding Quality Manual Content and Specificity ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
optomist1 Generic question regarding Two Way ANOVA Results Statistical Analysis Tools, Techniques and SPC 8
apestate Question on wording in DOD RFQ regarding ISO 9000 Various Other Specifications, Standards, and related Requirements 7
N ASME B89.1.13 question regarding Resolution and Maximum Permissible Error General Measurement Device and Calibration Topics 3
B Question regarding Mandatory Procedures and Manual AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
P Question in auditing regarding CAR (Corrective Action) Logs Internal Auditing 7
S Supplier Development Process failed - Question regarding sub-suppiler audits IATF 16949 - Automotive Quality Systems Standard 4
Q Question regarding O-ring application for water proofing a device Design and Development of Products and Processes 2
J Question regarding Device Master Records & Specification Developers 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
J Question regarding supplier approvals ISO 13485:2016 - Medical Device Quality Management Systems 12
J Cancellation of Specifications - Question regarding cancelled specifications Various Other Specifications, Standards, and related Requirements 3
ScottK ASME B&PVC Section VIII Div 1 question regarding "Seal" Various Other Specifications, Standards, and related Requirements 0
K Auditor's Question Regarding TS16949 Clause 7.5.2 - How vague can an auditor be IATF 16949 - Automotive Quality Systems Standard 18
S Question regarding document control - Control EVERY version of the same graphic? Document Control Systems, Procedures, Forms and Templates 5
A Question regarding TS16949 auditor rules 3.3 - Different auditors IATF 16949 - Automotive Quality Systems Standard 4
C Question Regarding MSA (Measurement Systems Analysis) - Pass / Fail Criteria tests Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
E Question Regarding OHSAS 18001 Occupational Health & Safety Management Standards 3
D What do you think of Chat GPTs answer to this Risk Acceptability question? ISO 14971 - Medical Device Risk Management 4
M ISO 13485 Supplier Question ISO 13485:2016 - Medical Device Quality Management Systems 13
Ed Panek FDA Submission Question US Medical Device Regulations 2
M Cleanroom Question Manufacturing and Related Processes 10
T Aircraft GAPP Software Testing Compliance Question AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
sonflowerinwales Quick question M3 screw plug gauge AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
B FDA regulations medical device prescription fulfillment DME question US Medical Device Regulations 0
M An interesting question about import company Other Medical Device Regulations World-Wide 5
Sam.F Question about training Training - Internal, External, Online and Distance Learning 20
B Labeling question about different manufacturers on a single label Manufacturing and Related Processes 4
Sam.F Question about granite surface plates out of spec AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
Ed Panek MDR question - Meaning of Stability CE Marking (Conformité Européene) / CB Scheme 6
B GD&T Question, True Position Confusion Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
D Initial Importer question Other US Medical Device Regulations 1
Ed Panek Calibration question Manufacturing and Related Processes 4
M Class Exempt Medical Device Recall Question US Food and Drug Administration (FDA) 3
sonflowerinwales Metric or Imperial; that is the question... After Work and Weekend Discussion Topics 6
M Can someone help me with this CMM programming question? Manufacturing and Related Processes 2
A A strange question about predicate device selected in 510(k) submission Medical Device and FDA Regulations and Standards News 8
D Document Control Question involving DocuSign US Food and Drug Administration (FDA) 6

Similar threads

Top Bottom