Question Regarding OHSAS 18001

E

EricChan

#1
Any one here can help me with followling questions?

- who generated this ohsas18001 standards?

- who administers the standards ohsas18001?

- who give its accreditation to certification bodies/registrars?

- and who/how many registrars can do this ohsas 18001 certification now?


Thanks.


Eric
 
Elsmar Forum Sponsor

Marc

Fully vaccinated are you?
Staff member
Admin
#2
As I understand it, the standard is a BSI standard which was derived from the former British Standard BS 8800.
 

gpainter

Quite Involved in Discussions
#3
OHSAS is used for certification purposes, BS 8800:1996 is really only a guidance document. The UKAS establishes the criteria for a fully accredited certification system. 18001 is the standard, 18002 is the guidance document. From my understanding it was in its 4th draft in January of this year. It has not been developed thru the formal standards process. It is based on sponsership with BSI leading the way.

NQA will register against 18001: [email protected]
SGS will register against 18001: [email protected]

The above info is based on info I have collected. Hope this helps:)
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#4
Participating Parties in Writing of OHSAS 18001

OHSAS 18001 has been developed with the assistance of the following co-operating organizations:
  • National Standards Authority of Ireland
  • South African Bureau of Standards
  • British Standards Institution
  • Bureau Veritas Quality International
  • Det Norske Veritas
  • Lloyds Register Quality Assurance
  • National Quality Assurance
  • SFS Certification
  • SGS Yarsley International Certification Services
  • Asociación Española de Normalización y Certificación
  • International Safety Management Organisation Ltd
  • Standards and Industry Research Institute of Malaysia-Quality Assurance Services
  • International Certification Services
Documents referenced during the development of this OHSAS specification:
  • BS 8800:1996 Guide to occupational health and safety management systems
  • Technical Report NPR 5001: 1997 Guide to an occupational health and safety management system
  • SGS & ISMOL ISA 2000:1997 Requirements for Safety and Health Management Systems
  • BVQI SafetyCert: Occupational Safety and Health Management Standard
  • DNV Standard for Certification of Occupational Health and Safety Management Systems (OHSMS):1997
  • Draft NSAI SR 320 Recommendation for an Occupational Health and Safety (OH and S) Management System
  • Draft AS/NZ 4801 Occupational health and safety management systems — Specification with guidance for use
  • Draft BS I PAS 088 Occupational health and safety management systems
  • UNE 81900 series of pre-standards on the Prevention of occupational risks
  • Draft LRQA SMS 8800 Health & safety management systems assessment criteria
The RvA (Netherlands) is working towards developing an Accreditation Scheme for third-party certification of Occupational Health and Safety Systems. Similarly, the KAB (South Korea) is developing an Accreditation Scheme
 
Thread starter Similar threads Forum Replies Date
L Question regarding "Customer Property" AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
T Noob question regarding sample size Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
Ron Rompen Question regarding CMM probe damage General Measurement Device and Calibration Topics 4
D Question regarding where "validations" fit according to ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 1
lanley liao Question regarding the calibration of monitoring and measure equipment. Oil and Gas Industry Standards and Regulations 3
D Question regarding "storage and distribution" ISO 13485:2016 - Medical Device Quality Management Systems 1
D Question regarding customer feedback process ISO 13485:2016 - Medical Device Quality Management Systems 3
D Question regarding ECO process, specifically for Life Science products and defining form fit and function ISO 13485:2016 - Medical Device Quality Management Systems 1
F ISO 13485 8.2.3 Reporting to regulatory authorities: Question regarding a procedure for this clause. ISO 13485:2016 - Medical Device Quality Management Systems 4
C Question regarding Quality Manual Content and Specificity ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
optomist1 Generic question regarding Two Way ANOVA Results Statistical Analysis Tools, Techniques and SPC 8
apestate Question on wording in DOD RFQ regarding ISO 9000 Various Other Specifications, Standards, and related Requirements 7
N ASME B89.1.13 question regarding Resolution and Maximum Permissible Error General Measurement Device and Calibration Topics 3
B Question regarding Mandatory Procedures and Manual AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
P Question in auditing regarding CAR (Corrective Action) Logs Internal Auditing 7
S Supplier Development Process failed - Question regarding sub-suppiler audits IATF 16949 - Automotive Quality Systems Standard 4
Q Question regarding O-ring application for water proofing a device Design and Development of Products and Processes 2
J Question regarding Device Master Records & Specification Developers 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
J Question regarding supplier approvals ISO 13485:2016 - Medical Device Quality Management Systems 12
J Cancellation of Specifications - Question regarding cancelled specifications Various Other Specifications, Standards, and related Requirements 3
ScottK ASME B&PVC Section VIII Div 1 question regarding "Seal" Various Other Specifications, Standards, and related Requirements 0
K Auditor's Question Regarding TS16949 Clause 7.5.2 - How vague can an auditor be IATF 16949 - Automotive Quality Systems Standard 18
S Question regarding document control - Control EVERY version of the same graphic? Document Control Systems, Procedures, Forms and Templates 5
A Question regarding TS16949 auditor rules 3.3 - Different auditors IATF 16949 - Automotive Quality Systems Standard 4
C Question Regarding MSA (Measurement Systems Analysis) - Pass / Fail Criteria tests Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
3 Scope question ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
K 510(k) Manufacturer question (private label and manufacture under another persons 510(k)) US Food and Drug Administration (FDA) 1
M Question About Rolled Throughput Yield Manufacturing and Related Processes 5
M Quick Gage R&R Question Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
S Question: Best alternatives to audits for ensuring compliance Quality Tools, Improvement and Analysis 5
Ed Panek Question from 13485 Auditor ISO 13485:2016 - Medical Device Quality Management Systems 2
C Question on KAFO (Knee Ankle Foot Orthosis device) classification CE Marking (Conformité Européene) / CB Scheme 0
T BMW GS 93010-2 Question Various Other Specifications, Standards, and related Requirements 1
S FDA 510(K) submission question US Food and Drug Administration (FDA) 4
T FDA UDI Question - Class II Medical Device Other US Medical Device Regulations 2
C Complaint Return Sample Size Question 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
8 Drawing Feature Question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
D Question: How to analyze numerical and attribute data Reliability Analysis - Predictions, Testing and Standards 11
D Question on electronic signatures and initials on batch records ISO 13485:2016 - Medical Device Quality Management Systems 4
A Special Characteristic question from Automotive CSR Customer and Company Specific Requirements 9
Ron Rompen GDT Question - is this even correct? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
A PPAP question for audit APQP and PPAP 17
C ISO Question - Do you say "I-S-O" or "I-Soh"? Misc. Quality Assurance and Business Systems Related Topics 14
D Question on Supplier Quality (SCAR) ISO 13485:2016 - Medical Device Quality Management Systems 6
A +0/-.001 Tolerance question - Feature size is 1.249 +0/-.001 - Actually measures 1.2493 (.0003 OHL Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
D Question and advice for a supplier self audit questionnaire ISO 13485:2016 - Medical Device Quality Management Systems 6
D Question on using audit checklist ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 20
D Question on Documented Calibration versus ISO 17025 Accredited Calibration ISO 13485:2016 - Medical Device Quality Management Systems 2
A Design Change/ECO Related Question 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
S Configuration Item definition question AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3

Similar threads

Top Bottom