Question regarding the calibration of monitoring and measure equipment.

#1
Greeting,

What is the calibration standard of infrared thermometer and thermocouple for low-temperature impact testing?

thank you!

Lingli Liao
April 9, 2021.
 
Elsmar Forum Sponsor

blueboat

Starting to get Involved
#2
Hello Lingli, normally you don't need to think about the calibration standard aspect, because as you know, all calibrations in China can be outsourced to a professional third party. You just need to find a competent one for your calibration service, then that will be enough.
 

Thee Bouyyy

Multiple Personalities
#3
Greeting,

What is the calibration standard of infrared thermometer and thermocouple for low-temperature impact testing?

thank you!

Lingli Liao
April 9, 2021.
We are following laboratory calibration procedure and/or ASTM E 220 for infrared thermometer and thermocouple.
 
Thread starter Similar threads Forum Replies Date
L Question regarding "Customer Property" AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
T Noob question regarding sample size Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
Ron Rompen Question regarding CMM probe damage General Measurement Device and Calibration Topics 4
D Question regarding where "validations" fit according to ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 1
D Question regarding "storage and distribution" ISO 13485:2016 - Medical Device Quality Management Systems 1
D Question regarding customer feedback process ISO 13485:2016 - Medical Device Quality Management Systems 3
D Question regarding ECO process, specifically for Life Science products and defining form fit and function ISO 13485:2016 - Medical Device Quality Management Systems 1
F ISO 13485 8.2.3 Reporting to regulatory authorities: Question regarding a procedure for this clause. ISO 13485:2016 - Medical Device Quality Management Systems 4
C Question regarding Quality Manual Content and Specificity ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
optomist1 Generic question regarding Two Way ANOVA Results Statistical Analysis Tools, Techniques and SPC 8
apestate Question on wording in DOD RFQ regarding ISO 9000 Various Other Specifications, Standards, and related Requirements 7
N ASME B89.1.13 question regarding Resolution and Maximum Permissible Error General Measurement Device and Calibration Topics 3
B Question regarding Mandatory Procedures and Manual AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
P Question in auditing regarding CAR (Corrective Action) Logs Internal Auditing 7
S Supplier Development Process failed - Question regarding sub-suppiler audits IATF 16949 - Automotive Quality Systems Standard 4
Q Question regarding O-ring application for water proofing a device Design and Development of Products and Processes 2
J Question regarding Device Master Records & Specification Developers 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
J Question regarding supplier approvals ISO 13485:2016 - Medical Device Quality Management Systems 12
J Cancellation of Specifications - Question regarding cancelled specifications Various Other Specifications, Standards, and related Requirements 3
ScottK ASME B&PVC Section VIII Div 1 question regarding "Seal" Various Other Specifications, Standards, and related Requirements 0
K Auditor's Question Regarding TS16949 Clause 7.5.2 - How vague can an auditor be IATF 16949 - Automotive Quality Systems Standard 18
S Question regarding document control - Control EVERY version of the same graphic? Document Control Systems, Procedures, Forms and Templates 5
A Question regarding TS16949 auditor rules 3.3 - Different auditors IATF 16949 - Automotive Quality Systems Standard 4
C Question Regarding MSA (Measurement Systems Analysis) - Pass / Fail Criteria tests Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
E Question Regarding OHSAS 18001 Occupational Health & Safety Management Standards 3
3 Scope question ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
K 510(k) Manufacturer question (private label and manufacture under another persons 510(k)) US Food and Drug Administration (FDA) 1
M Question About Rolled Throughput Yield Manufacturing and Related Processes 5
M Quick Gage R&R Question Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
S Question: Best alternatives to audits for ensuring compliance Quality Tools, Improvement and Analysis 5
Ed Panek Question from 13485 Auditor ISO 13485:2016 - Medical Device Quality Management Systems 2
C Question on KAFO (Knee Ankle Foot Orthosis device) classification CE Marking (Conformité Européene) / CB Scheme 0
T BMW GS 93010-2 Question Various Other Specifications, Standards, and related Requirements 1
S FDA 510(K) submission question US Food and Drug Administration (FDA) 4
T FDA UDI Question - Class II Medical Device Other US Medical Device Regulations 2
C Complaint Return Sample Size Question 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
8 Drawing Feature Question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
D Question: How to analyze numerical and attribute data Reliability Analysis - Predictions, Testing and Standards 11
D Question on electronic signatures and initials on batch records ISO 13485:2016 - Medical Device Quality Management Systems 4
A Special Characteristic question from Automotive CSR Customer and Company Specific Requirements 9
Ron Rompen GDT Question - is this even correct? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
A PPAP question for audit APQP and PPAP 17
C ISO Question - Do you say "I-S-O" or "I-Soh"? Misc. Quality Assurance and Business Systems Related Topics 14
D Question on Supplier Quality (SCAR) ISO 13485:2016 - Medical Device Quality Management Systems 6
A +0/-.001 Tolerance question - Feature size is 1.249 +0/-.001 - Actually measures 1.2493 (.0003 OHL Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
D Question and advice for a supplier self audit questionnaire ISO 13485:2016 - Medical Device Quality Management Systems 6
D Question on using audit checklist ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 20
D Question on Documented Calibration versus ISO 17025 Accredited Calibration ISO 13485:2016 - Medical Device Quality Management Systems 2
A Design Change/ECO Related Question 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
S Configuration Item definition question AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3

Similar threads

Top Bottom