R&D line being used to supplement Manufacturing line

Q

qualityboi

#1
If we have an R&D line with their own equipment, and that line, on occasion is used to share capacity to back up the normal MFG line even in very low volumes, should the R&D line then be responsible and accountable to all MFG standards, including, FMEAs, Control plans, and the same quality system standards in general?
 
Elsmar Forum Sponsor

Marc

Fully vaccinated are you?
Leader
Admin
#2
In a word, Yes. That's not to mention potential issues if it is a product which was validated and/or qualified on a specific line or set of equipment.
 
Thread starter Similar threads Forum Replies Date
Anerol C On line training for REACH, RoHS, Halogen RoHS, REACH, ELV, IMDS and Restricted Substances 1
S How many tester quantity we need on the line based on the cycle time and peak volume Manufacturing and Related Processes 3
S Line arrangement Lean in Manufacturing and Service Industries 2
A Production line for medical devices Other Medical Device Related Standards 1
B Acquired Medical Device Product Line - Documentation Requirements for Device Master Record ISO 13485:2016 - Medical Device Quality Management Systems 7
T Training Records - assembly line staff ISO 13485:2016 - Medical Device Quality Management Systems 20
F [Line Balancing] Line Efficiency in Fan Manufacturing Lean in Manufacturing and Service Industries 0
B 3-phase supply, overvoltage catogory, line-to-neutral and working voltage (IEC 61010-1) IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
G Risk of stopping your customer's line IATF 16949 - Automotive Quality Systems Standard 4
C Where to draw the line for "sufficient evidence" to verify safety/performance of a device? CE Marking (Conformité Européene) / CB Scheme 2
G Bad Parts cause Customer line stop IATF 16949 - Automotive Quality Systems Standard 13
G Dealing with non conformity caused by Supplier Components detected in the production line IATF 16949 - Automotive Quality Systems Standard 14
F Internal transfer of work from one line to another? Qualification and Validation (including 21 CFR Part 11) 3
A What does this line from MDCG 2020-3 (MDR art. 120 substantial change) mean to you? EU Medical Device Regulations 4
G Engineering retest in line - Machine stability issues IATF 16949 - Automotive Quality Systems Standard 8
T ISO 13485 8.3 - Non-Conforming Materials - on-line rework or part of process? ISO 13485:2016 - Medical Device Quality Management Systems 11
H Line Balancing in Backpack Manufacturing Manufacturing and Related Processes 4
C Contract Review with Multiple Line items ISO 13485:2016 - Medical Device Quality Management Systems 7
J Production Line Test Brasil - High Voltage Dielectric Strenght Test Other Medical Device Regulations World-Wide 5
R Revalidation machine line and Stability Studies impact. Medical Device and FDA Regulations and Standards News 3
G Does pitch/increment/resolution of a ruled scale apply to measurement uncertainty as line item? Measurement Uncertainty (MU) 10
Q Clean Line Validation ISO 13485:2016 - Medical Device Quality Management Systems 6
P Line accums as a non-conformance? Supplier Quality Assurance and other Supplier Issues 2
Marc Quiz - Where did the idea of an assembly line come from? Coffee Break and Water Cooler Discussions 4
Edward Reesor Design owner: The line between inventor and manufacturing facility Manufacturing and Related Processes 3
G Uncertainty of staging a short line scale standard on longer measuring machine? Measurement Uncertainty (MU) 4
E What is the general time line to prepare for IATF Letter of Conformance? IATF 16949 - Automotive Quality Systems Standard 1
M Establishing a FTQ (First Time Quality) process for an engine assembly line Quality Tools, Improvement and Analysis 1
P Production Line Pump Cleaning Validation Method Question Qualification and Validation (including 21 CFR Part 11) 0
I SMD line PQ Validation 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
P Controlled Setup Sheets for a production line Document Control Systems, Procedures, Forms and Templates 2
T Production line requirements for IATF 16949 - Need to have dedicated lines? IATF 16949 - Automotive Quality Systems Standard 3
K IATF 16949 Line and Dock Auditor Competency Requirements Internal Auditing 4
N Gantt Chart / Time Tracker in Excel - Combining Tasks on the Same Line Excel .xls Spreadsheet Templates and Tools 2
gard2372 Line or Process Stoppage - Andon Authorities and Process Manufacturing and Related Processes 1
M Lean Time Line (History and Theory) Lean in Manufacturing and Service Industries 5
R The on-line re-certification option on ASQ's website Professional Certifications and Degrees 5
M Anyone know of an on-Line Bachelor's degree that work with Quality Career and Occupation Discussions 3
J Medical Device Failure Effects - Where to draw the line? FMEA and Control Plans 8
K 21 CFR Part 11 (and EU) compliant Digital Signatures on a Production Line Other US Medical Device Regulations 5
R IEC 60601-1 4th Edition - Is a "Red-line" version available? IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
K Mandatory Electrical Safety Tests - Regular Production Line IEC 60601 - Medical Electrical Equipment Safety Standards Series 9
T A question on Calibration on In-line Laser Micrometer General Measurement Device and Calibration Topics 1
J Excel spreadsheet to use Basic and Mini MOST for Line Balancing Document Control Systems, Procedures, Forms and Templates 1
N Dual ISO 9001 (Manufacturing) and ISO 13485 (Design Control) for same product line ISO 13485:2016 - Medical Device Quality Management Systems 3
K TS16949 registration for Kitting and Line Sequencing Service company IATF 16949 - Automotive Quality Systems Standard 1
G Service Parts Assembly Line and Scope of TS16949 Registration IATF 16949 - Automotive Quality Systems Standard 3
U TS16949 Internal Auditor Training - Is On-line training OK? Training - Internal, External, Online and Distance Learning 1
D Inquiry about QC Testing (In Line Sampling) Reliability Analysis - Predictions, Testing and Standards 13
LRE67 What do you do when your Auditor crosses the line to Consulting? General Auditing Discussions 9

Similar threads

Top Bottom