Reference to IATF 16949 clause 8.4.3 in clause 8.3.4.4, Is it right?

M

morteza

Trusted Information Resource
#1
#1
Hello all,
In clause 8.3.4.4 IATF 16949 states:

The organization shall approve externally provided products and services per ISO 9001, section 8.4.3, prior to submission of their part approval to the customer.

It seems that this reference is not correct or suitable. Reference to clauses 8.4.1 or 8.4.2 or 8.6 are better than reference to clause 8.4.3.

what are your idea, friends?
 
SQCpack - Communicate Quality Metrics
Elsmar Forum Sponsor
G

Golfman25

Trusted Information Resource
#2
#2
It's making a general reference to sec b) where you need to tell your supplier what will be involved in the initial approval of their products/services.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
W Do Reference materials for IATF need to be 17025? IATF 16949 - Automotive Quality Systems Standard 15
W Cross reference between APQP and VDA MLA? APQP and PPAP 0
J Selecting reference standards for calibration General Measurement Device and Calibration Topics 3
V Is it required to recalibrate reference- standard instruments after equipment qualification General Measurement Device and Calibration Topics 0
I Hold Time studies for Primary Reference standards Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0
E 510k reference devices US Food and Drug Administration (FDA) 4
G Seeking reference guides/ documentation /tips on verification best practices Other Medical Device Related Standards 6
B Qualifying a reference analyzer 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
E MSA Reference Manual 2nd Edition Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
M Reference to an archived template in multiple SOPs ISO 13485:2016 - Medical Device Quality Management Systems 2
R Statistical Methods for comparing test and reference product equivalence for quality attributes US Food and Drug Administration (FDA) 3
K COPLANARITY: Composite profile tolerance on multiple surfaces- what does" lower dimensional reference frame tolerance" control? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
C KAPPA index Reference Value for Visual inspection IATF 16949 - Automotive Quality Systems Standard 1
G GD&T applied to reference dimension. Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
C IVD Metrological traceability without a reference measurement procedure General Measurement Device and Calibration Topics 11
M Reference part calibration or verification General Measurement Device and Calibration Topics 12
G Need journal and reference of abnormal bar chart SPC Statistical Analysis Tools, Techniques and SPC 4
W What is okay to use as a reference material for ISO 17025? ISO 17025 related Discussions 4
M SOPs - Reference Documents Section Document Control Systems, Procedures, Forms and Templates 4
B Reference to IEC 60950-1 in Amendment 2 IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
D Question on equipment - when to use reference only or research only stickers ISO 13485:2016 - Medical Device Quality Management Systems 5
J Marking "Distributed By" to product with distributors' reference-code EU Medical Device Regulations 3
Dazza 9001, 14001 and 45001 mandatory documents and records cross reference matrix Process Maps, Process Mapping and Turtle Diagrams 2
T CSE 5.01 reference on drawing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
N IEC 60601-1-1 - Stress test, reference voltage IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
CycleMike GD&T - Hole pattern - Print (attached) has a single Datum Reference Frame Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J Sample size for creating a data base as a reference to a tested variable Other Medical Device and Orthopedic Related Topics 6
R ASQ reference material clarification - Spiral bound materials allowed in ASQ Exam? Professional Certifications and Degrees 1
D Good Acceptance Activity/Inspection flowchart for reference - Wanted Please Process Maps, Process Mapping and Turtle Diagrams 2
G Customer complaint over a Reference Dimension Manufacturing and Related Processes 9
G Measure 3 times, for calibration report? Customer Owned Reference Standard General Measurement Device and Calibration Topics 4
I Data Backup Plan - Document Reference ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
Q How to efficiently and compliantly reference external standards/regulations Other Medical Device Related Standards 2
S Lot assignment for secondary reference standard - Pharmaceuticals Manufacturing and Related Processes 0
V Inspection with 3D Scanning - Reference Data Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
E Ethylene Oxide Sterilization Validation-Reference Load Other Medical Device Related Standards 8
C Must your reference standard provider be ISO17034 certified to meet your testing lab's ISO 17025 certification requirements? Other ISO and International Standards and European Regulations 2
C Do Calibration Reference Standards require an MSA study? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
J Purpose of Reference Section in SOPs Document Control Systems, Procedures, Forms and Templates 6
M Quality Policy - Standards and reference numbers ISO 13485:2016 - Medical Device Quality Management Systems 14
S Reference calibration tools (traceable to NIST) that are not used in production ISO 13485:2016 - Medical Device Quality Management Systems 4
S Contract Manufacturer Question - Whether or not the reference to the ex-CMO ISO 13485:2016 - Medical Device Quality Management Systems 6
B Need to convert Reference Only M&TE to a calibration schedule General Measurement Device and Calibration Topics 3
M Looking for Cross reference of AS9100:2016 to ISO13485 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
E Print only has Reference Dimensions Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
V QMS / QSR - Reference to Framework - Templates - Procedures for Medical Devices 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
R How to Cross-Reference Controlled Documents Document Control Systems, Procedures, Forms and Templates 3
E IEC 60601-2-25 Reference to 60601-1 2nd Edition IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
D Visual Inspection with No Visual Reference General Measurement Device and Calibration Topics 2
M AS9100 Rev. D - Can anyone recommend a good reference book? Book, Video, Blog and Web Site Reviews and Recommendations 7

Similar threads

Top Bottom