Referencing or Using a Master Part to take Measurements

C

claydos66

#1
Good Afternoon,
i'm currently working on a project in which I am looking to acquire a new piece of measurement equipment. Generally, the facility that I am in uses traditional pieces of equipment such as OGP's , CMM's, etc. We are looking into purchasing a system which utilizes a reference or master part to take measurements.

I wouldn't know where to begin with these. How does this differ from the traditional method of calibrating a probe via a sphere, and running a routine? Do you need to keep the masters?

I have never worked on this kind of system. Any reply would help. thanks.
 
Elsmar Forum Sponsor
T

True Position

#2
Re: Referencing or using a master

You'll probably need to describe the system in more detail first, from your description I have no idea what it is. Laser? Contact Probe? Direct light? Camera based vision?
 
Thread starter Similar threads Forum Replies Date
S Referencing quote on PO AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
M Referencing Harmonised Standards in Declarations of Conformity EU Medical Device Regulations 10
M Referencing the MDR by name in QMS SOPs EU Medical Device Regulations 2
J Referencing Medical Device in FDA records - Package contains several other components Other Medical Device Regulations World-Wide 1
M Informational EC – Guide for referencing standards in public procurement in Europe (JIS Action 11) Medical Device and FDA Regulations and Standards News 0
N Referencing of a standard's year in routine regulatory compliance documents Other Medical Device Related Standards 3
B Referencing to Supplier Outputs within our Document Control System 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
M Referencing ISO 9001:2015 clause for Audit General Auditing Discussions 10
S Referencing International Standards as Design Input Design and Development of Products and Processes 5
D Referencing Standards in Procedures - Current version or actual? Document Control Systems, Procedures, Forms and Templates 6
S Referencing procedures on Control Plans - Best Practices FMEA and Control Plans 3
P Question on First Article Inspection referencing ISO 2768 APQP and PPAP 1
J Referencing the DMR (Design Master Record) in the PO Document Control Systems, Procedures, Forms and Templates 2
Q Referencing EN 63204:2006 instead of EN 62304:2006 AC:2008 IEC 62304 - Medical Device Software Life Cycle Processes 9
Q Referencing a Specification in a Work Instruction as a ?Guidance Document? ISO 13485:2016 - Medical Device Quality Management Systems 1
Crusader 7.6 Calibration (referencing outsourcing) in the Quality Manual Quality Management System (QMS) Manuals 5
M Referencing Standards in Engineering and Regulatory Documents Other ISO and International Standards and European Regulations 1
R Para 4.2.2 b) Referenced Documents - Adequate referencing? Copy and Paste? ISO 13485:2016 - Medical Device Quality Management Systems 5
S Referencing other documents in Control Plans Quality Manager and Management Related Issues 5
P Referencing of Forms in Procedures ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
M Referencing the Regulation in a Design Specification 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
R Referencing and Controlling Labels & Stickers used internally throughout Production Document Control Systems, Procedures, Forms and Templates 1
Q AS9100 and NADCAP - Our QM was told that referencing IPC 620 was acceptable AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
S Referencing somebody else?s CE Mark and NB Number on an Instruction Leaflet? CE Marking (Conformité Européene) / CB Scheme 7
N Cross-Referencing ISO 9001/ISO 14001/OHSAS 18001 Occupational Health & Safety Management Standards 17
K Question about referencing software - Database Records Document Control Systems, Procedures, Forms and Templates 11
L Surveillance Audit - NC for not referencing requirement of Cl 6.4 in audit plan ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 14
Q Work instructions - Referencing other documents including procedures Document Control Systems, Procedures, Forms and Templates 18
A Calling / Referencing National Standards in Quality Manuals Quality Management System (QMS) Manuals 1
D Finding Optimum Design Parameters using Taguchi method? Using Minitab Software 0
V MSA - Using a R&R study for a Tape Measure Reliability Analysis - Predictions, Testing and Standards 18
D Using electronic lab notebooks in the design control process ISO 13485:2016 - Medical Device Quality Management Systems 3
M Using a Non Certified vendor Supplier Quality Assurance and other Supplier Issues 5
H Using/Selling power banks with your product as a "mobile version" CE Marking (Conformité Européene) / CB Scheme 3
cgaro62 Using internal audits as part of document reviews Document Control Systems, Procedures, Forms and Templates 21
R Select the 1 Supplier based on the Parts Durability from 6 Supplier Samples using Minitab Using Minitab Software 11
M MSA angle issue - Nylon parts using Aberlink 3D Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
D Question on using audit checklist ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 20
J Using of CE marking - Two CE markings on the product CE Marking (Conformité Européene) / CB Scheme 5
R Using R package to implement Bayesian phase I/II dose-finding design for three outcomes ISO 13485:2016 - Medical Device Quality Management Systems 6
S Defibrillator Protection applicability When using Multiple applied parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
P Using Zinc Plated Steel in a Cleanroom Other Medical Device Related Standards 3
J Incoming Inspection Records using Excel File ISO 13485:2016 - Medical Device Quality Management Systems 2
J Using ring gauges General Measurement Device and Calibration Topics 2
M Load Cell Calibration using a totalizer on a flow meter General Measurement Device and Calibration Topics 0
P Can Neoprene be Cleaned Using Isopropyl Alcohol (IPA) Manufacturing and Related Processes 4
GreatNate Anyone using the Intellect QMS software? Quality Assurance and Compliance Software Tools and Solutions 1
chris1price Sterilization using beta radiation Other Medical Device Related Standards 2
M Using the phrase "herein referred to" Document Control Systems, Procedures, Forms and Templates 8
B Struggling with using the 5.6 version Ford Capacity Analysis Report APQP and PPAP 5

Similar threads

Top Bottom