Relation between 93/42/EEC and 2007/47/EC

bio_subbu

Super Moderator
#21
Dear Subbramanian,

Thank you very much for your immediately and timely reply. I am afraid while seeing Geechj post because i already updated all my documents as " MDD 93/42/EEC as amended by directive 2007/47/EC of 21 september 2007".

Don’t worry about it, you have to make your Declaration of Conformity to 2007/47/EC after March 2010 only. Refer page no- 9 of attached BSI presentation on “2007/47/EC BSI Approach to Issuance of Certificates, Labeling and Declarations of Conformity”.

If the review takes place before 21 March 2010, you may wish to modify the Declaration of Conformity to include the words as amended by 2007/47/EC or similar. (Refer page No-12)

Thanks and Regards
S. Subramaniam
 

Attachments

Elsmar Forum Sponsor
T

TLOBRIEN

#22
Does anyone have an actual gap analysis worksheet/form they'd be willing to share? I've started my own several times, but can't seem to nail down a solid, sensical way to organize the info.

Thanks!
 
Thread starter Similar threads Forum Replies Date
Y What is the relation between MDD 93/42/EEC and Biocide 98/8/EC EU Medical Device Regulations 5
A How can we find the relation between life time and durability test in automotive part Reliability Analysis - Predictions, Testing and Standards 8
J MD Compliance for Dummies - Relation between devices, directives and standards ISO 13485:2016 - Medical Device Quality Management Systems 3
A Difference between major, Minor, finding and Observation in relation to a CAR Nonconformance and Corrective Action 7
E Cpk - Relation between measurements and resulting tolerances - Trimming resistors Capability, Accuracy and Stability - Processes, Machines, etc. 4
samer Relation between warranties and ISO 9001:2000 Clause 7.5.2 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
S What is the relation between competence and performance? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
A What is the relation between SAP and ISO 9001:2000 documentation requirements? Quality Assurance and Compliance Software Tools and Solutions 3
S MSA for attribute relation gage Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
F NCMRs and its relation to CAPA Nonconformance and Corrective Action 7
K Measuring Function MEDDEV 2.1/5 relation with MDD 93/42/EEC CE Marking (Conformité Européene) / CB Scheme 1
M Informational EU – Minutes of the 24 July 2019 SCHEER Working Group on safety of breast implants in relation to anaplastic large cell lymphoma (BIA-ALCL) meeting Medical Device and FDA Regulations and Standards News 0
M Informational US FDA paper – Epidemiological Evidence on the Adverse Health Effects Reports in Relation to Mercury from Dental Amalgam: Systematic Literature Review Medical Device and FDA Regulations and Standards News 0
L Calibration Accuracy In Relation To Reporting General Measurement Device and Calibration Topics 1
R EN 80601-2-13 in relation to an AGSS (Scavenging) product Other Medical Device Related Standards 0
D Cpk relation to Reliability Capability, Accuracy and Stability - Processes, Machines, etc. 4
M Regarding the definition of "pneumatic" in relation to IEC 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 9
Douglas E. Purdy Relation of Aluminum 6061-0 to AMS 4025 or AMS 4027 Various Other Specifications, Standards, and related Requirements 3
G The leading practices in Customer Relation Management Customer Complaints 3
G Leading Practices in Customer Relation Management Quality Manager and Management Related Issues 2
C Furnace Classes in relation to AMS 2750 to determine Calibration Interval Calibration Frequency (Interval) 2
G Relation b/n Process Failure Mode RPN Value and the associated Process Failure Cost FMEA and Control Plans 3
D Classifying Nonconformance so that they can be Actioned in Relation to Time Frames Nonconformance and Corrective Action 7
V Minitab Pareto - Trying to plot a relation of Count and Cycle Time Using Minitab Software 5
Manix GM Terms - GLD in relation to Master Colour and Gloss? Can anyone define! Customer and Company Specific Requirements 12
C Guidance required in relation to refurbishment / remanufacturing of a Medical Device ISO 13485:2016 - Medical Device Quality Management Systems 4
D ISO 9001 tree - Diagram showing the inter-relation of all the ISO clauses ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
K Could anyone tell me what is relation / difference in Cpk and Ppk Capability, Accuracy and Stability - Processes, Machines, etc. 4
Douglas E. Purdy Infrastructure (6.3) and Work Environment (6.4) In Relation to 7.4.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 24
Q Definition BOS - Business Operating System - Does BOS have any relation to Ford's QOS? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 1
A Heard of FS 9000? This is in relation to the Financial Industry Other ISO and International Standards and European Regulations 3
Moumen H Variations between ASTM A29 Standard for steel bars and Mill test certificates specs Manufacturing and Related Processes 1
N R&R for Differences between 2 measurements Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S Distinction between a critical supplier and a Virtual manufacturer EU Medical Device Regulations 2
I Сorrespondence between hazards and risks ISO 14971 - Medical Device Risk Management 2
W What is the difference between TYPE B and TYPE BF? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
T The difference between ISO 14644-3:2005 and ISO 14644:2019 Other Medical Device Related Standards 2
Q Terminal Lugs sizes - Difference between 225/24 vs. 275/24 lugs Manufacturing and Related Processes 2
T Relationship between ISO 9001 and ISO – IEC BS EN 870079- 34 2020 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
M Difference between "Production Trial Run" and "Run at Rate" IATF 16949 - Automotive Quality Systems Standard 8
Ron Rompen Surface Finish Correlation between Ra, Rz and Tp (bearing surface ratio) General Measurement Device and Calibration Topics 3
L MRA between EU and Switzerland - 1/2021 EU Medical Device Regulations 2
D Difference between Test Method Validation and Gage R&R Qualification and Validation (including 21 CFR Part 11) 18
K Joint approval between OEM and Manufacturer on Design Documents ISO 13485:2016 - Medical Device Quality Management Systems 4
C Is my software an accessory? Telecommunication between HCP and patients EU Medical Device Regulations 10
K Verify Software Architecture - supporting interfaces between items IEC 62304 - Medical Device Software Life Cycle Processes 2
E ASTM F2118 - Fatigue testing of bone cement - Changes between the 2003 and the 2014? Other Medical Device Related Standards 1
A What is the difference between Design Process, Process Design and Design Control? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
R What's the major difference between Green Belt and Black Belt in term of training and project Six Sigma 3
DuncanGibbons How is the arrangement between Design and Production organisation envisaged? EASA and JAA Aviation Standards and Requirements 4

Similar threads

Top Bottom