Relation of Aluminum 6061-0 to AMS 4025 or AMS 4027

Douglas E. Purdy

Douglas E. Purdy

Quite Involved in Discussions
#1
#1
We have a customer print that has the "Perforated Aluminum per AMS 4025 or AMS-QQ-A-250/11 (6061 -0) and a thickness of .040 +/1 .003." Now AMS-QQ-A-250/11 has been cancelled [**CNCL S/S BY SAE AMS 4025, AMS 4026, AMS 4027 AND ASTM B 209**] When I read AMS 4025 or AMS 4027 I am not able to gather what the tensile requirements are for 6061-O. What am I doing wrong?

Thanks,
Douglas E. Purdy
 
Highly Rated Gage Tracking - Learn More
Elsmar Forum Sponsor
A

andygr

#3
#3
"Perforated Aluminum per AMS 4025 or AMS-QQ-A-250/11 (6061 -0) and a thickness of .040 +/- .003."

You have -0 condition at a nominal thickness of .040

Per AMS 4025
3.3.1.1 Tensile Properties in the Annealed (-O) Condition Shall be as shown in Table 2.

From Table 2
Nominal ThicknessInches TensileStrength
ksi, max
Over 0.128 to 0.499, incl 22.0
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
T Relation between ISMS and QMS for a SaMD Medical Information Technology, Medical Software and Health Informatics 3
H Relation of VDE mark with CE certification CE Marking (Conformité Européene) / CB Scheme 11
T Is there a direct relation between surface roughness and gloss? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
D What evidence do I need to supply as a remote location in relation to manufacturing sites? IATF 16949 - Automotive Quality Systems Standard 14
S MSA for attribute relation gage Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
F NCMRs and its relation to CAPA Nonconformance and Corrective Action 7
K Measuring Function MEDDEV 2.1/5 relation with MDD 93/42/EEC CE Marking (Conformité Européene) / CB Scheme 2
M Informational EU – Minutes of the 24 July 2019 SCHEER Working Group on safety of breast implants in relation to anaplastic large cell lymphoma (BIA-ALCL) meeting Medical Device and FDA Regulations and Standards News 0
M Informational US FDA paper – Epidemiological Evidence on the Adverse Health Effects Reports in Relation to Mercury from Dental Amalgam: Systematic Literature Review Medical Device and FDA Regulations and Standards News 0
L Calibration Accuracy In Relation To Reporting General Measurement Device and Calibration Topics 1
R EN 80601-2-13 in relation to an AGSS (Scavenging) product Other Medical Device Related Standards 0
D Cpk relation to Reliability Capability, Accuracy and Stability - Processes, Machines, etc. 4
M Regarding the definition of "pneumatic" in relation to IEC 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 9
Y What is the relation between MDD 93/42/EEC and Biocide 98/8/EC EU Medical Device Regulations 5
G The leading practices in Customer Relation Management Customer Complaints 3
G Leading Practices in Customer Relation Management Quality Manager and Management Related Issues 2
A How can we find the relation between life time and durability test in automotive part Reliability Analysis - Predictions, Testing and Standards 8
C Furnace Classes in relation to AMS 2750 to determine Calibration Interval Calibration Frequency (Interval) 2
G Relation b/n Process Failure Mode RPN Value and the associated Process Failure Cost FMEA and Control Plans 3
C Relation between 93/42/EEC and 2007/47/EC EU Medical Device Regulations 21
D Classifying Nonconformance so that they can be Actioned in Relation to Time Frames Nonconformance and Corrective Action 7
V Minitab Pareto - Trying to plot a relation of Count and Cycle Time Using Minitab Software 5
Manix GM Terms - GLD in relation to Master Colour and Gloss? Can anyone define! Customer and Company Specific Requirements 12
J MD Compliance for Dummies - Relation between devices, directives and standards ISO 13485:2016 - Medical Device Quality Management Systems 3
C Guidance required in relation to refurbishment / remanufacturing of a Medical Device ISO 13485:2016 - Medical Device Quality Management Systems 4
D ISO 9001 tree - Diagram showing the inter-relation of all the ISO clauses ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
K Could anyone tell me what is relation / difference in Cpk and Ppk Capability, Accuracy and Stability - Processes, Machines, etc. 4
A Difference between major, Minor, finding and Observation in relation to a CAR Nonconformance and Corrective Action 7
E Cpk - Relation between measurements and resulting tolerances - Trimming resistors Capability, Accuracy and Stability - Processes, Machines, etc. 4
samer Relation between warranties and ISO 9001:2000 Clause 7.5.2 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
Douglas E. Purdy Infrastructure (6.3) and Work Environment (6.4) In Relation to 7.4.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 24
Q Definition BOS - Business Operating System - Does BOS have any relation to Ford's QOS? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 1
S What is the relation between competence and performance? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
A Heard of FS 9000? This is in relation to the Financial Industry Other ISO and International Standards and European Regulations 3
A What is the relation between SAP and ISO 9001:2000 documentation requirements? Quality Assurance and Compliance Software Tools and Solutions 3
J Drawing Example Request: Inspection Section Plane of Aluminum Casting Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
J Aluminum anodization as MOP insulation? Clause 8.5.1.1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
J Aluminum in CER Other Medical Device Related Standards 2
C Aluminum galling on thread plug gauge Manufacturing and Related Processes 10
M Aluminum - What is the difference between 6061-T6 and 6061-T651 (both per ASTM B211)? Manufacturing and Related Processes 4
F AS9100 D - Verification of purchased product - Sheet metal and aluminum extrusion stock AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
R Specification on flare testing extruded aluminum - Where to find Design and Development of Products and Processes 1
D Ideas for Poka Yoke or Improvement - Aluminum FOD in Assembly Customer Complaints 3
R DFARS Compliance - Purchasing Aluminum Alloy 7075 -T73511 per AMS-QQ-A-200/11 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
C Looking for Testing Laboratory for Aluminum Products - CE Marking General Measurement Device and Calibration Topics 5
A Wire Holder for Resistance Measurement of Stranded Aluminum Wire Manufacturing and Related Processes 2
C DFAR 252.225-7008 - Is aluminum, say T6061, considered specialty metal (i) steel? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
A Aluminum Die Casting Product Traceability Manufacturing and Related Processes 10
J Maximal limit of Aluminum in Polymer Medical Device Implants (EU) Other Medical Device and Orthopedic Related Topics 1
J Determining if there is Tin Plating on an Aluminum Bar Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6

Similar threads

Top Bottom