Relationship of ANSI Z1.4 2003 and ISO 21247:2005

  • Thread starter qualitygoddess - 2010
  • Start date
Q

qualitygoddess - 2010

#1
I am familiar with ANSI Z1.4 2003 and its use for sampling. I have not read the ISO 21247 standard, but think I might have use for it. Has someone used this standard for acceptance and zero sampling, and can you give me a summary? Also, in your opinion, what is the relationship between the ANSI sampling std and the ISO std?

Thanks.
 
Elsmar Forum Sponsor

harry

Super Moderator
#2
Any takers?

Just for information:

ISO 21247:2005
Combined accept-zero sampling systems and process control procedures for product acceptance
ISO 21247:2005 provides a set of accept-zero sampling systems and procedures for planning and conducting inspections to assess quality and conformance to specified requirements. In addition, ISO 21247:2005 provides requirements for alternative acceptance methods proposed by the supplier. Such alternative methods would be based upon establishing and implementing an internal prevention-based quality management system as a means of ensuring that all products conform to requirements specified by the contract and associated specifications and standards. ISO 21247:2005, when cited in contract, is applicable to the supplier and extends to subcontractors or vendors. The quality plans are to be applied as specified in the contract documents, and deliverables may be submitted for acceptance if the requirements of ISO 21247:2005 have been met. Sampling systems and procedures in ISO 21247:2005 are applicable, when appropriate, to assess conformance to requirements of end items; components or basic materials; operations or services; materials in process; supplies in storage; maintenance operations; data or records; administrative procedures The sampling systems and procedures of ISO 21247:2005 are not intended for use with destructive tests or where product screening is not feasible or desirable. In such cases, the sampling systems to be used will be specified in the contract or product specifications.
 
Thread starter Similar threads Forum Replies Date
T Special Inspection Level 3 (S-3) per ANSI Z 1.4 & its relationship with ISO 2859-1 AQL - Acceptable Quality Level 1
P The relationship between ISO 17025 vs. ANSI Z540-1 ISO 17025 related Discussions 2
W 17025 and NIST handbook relationship (need advice) ISO 17025 related Discussions 8
T Relationship between ISO 9001 and ISO – IEC BS EN 870079- 34 2020 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
L 'Distributor' definition & MDR/MSR relationship EU Medical Device Regulations 3
S APQP Relationship Diagram APQP and PPAP 2
J CEN/TR 17223:2018 Guidance on the relationship between13485 and MDR.. worth the money?? ISO 13485:2016 - Medical Device Quality Management Systems 3
S Relationship between IEC 62304 problem resolution and ISO 13485 IEC 62304 - Medical Device Software Life Cycle Processes 8
K Does OEM/OBL-Relationship need to involve an EU Authorized Representative? EU Medical Device Regulations 11
MDD_QNA What is the relationship with the CSA group? Canada Medical Device Regulations 10
T ITAR/EAR relationship and Flow Down to Suppliers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
C Understanding the relationship between 62304 and the MDD ER IEC 62304 - Medical Device Software Life Cycle Processes 7
D Relationship between Diameter and Flow Rate & the Length Statistical Analysis Tools, Techniques and SPC 3
T Relationship between ISO9001 and Lean Lean in Manufacturing and Service Industries 15
C DFMEA vs. PFMEA Relationship: The cause in DFMEA becomes Failure in the PFMEA FMEA and Control Plans 2
J Responsibilities, Authorities and Relationships - What does Relationship mean? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
5 ISO 13485 relationship to 21 CFR 820 ISO 13485:2016 - Medical Device Quality Management Systems 17
alonFAI Definition Failure Review Board and FRACAS - Relationship and differences Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
T Capability Level Relationship with ISO/IEC 20000 Achievement IT (Information Technology) Service Management 2
P The relationship between SPC and a Quality Management System Statistical Analysis Tools, Techniques and SPC 4
N Agile 9.3.1 Relationship Searches - Meaning of Message Manufacturing and Related Processes 1
T Relationship between TS16949 and 5 Core Tools & relationship between 5 Core Tools IATF 16949 - Automotive Quality Systems Standard 5
N What is the relationship between a DFMEA and PFMEA? FMEA and Control Plans 1
C CRMs (Customer Relationship Management) to help achieve ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
C ISO9001 and ISO 13485 Relationship? Can we do both effectively? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
Q What is the relationship between Standard Deviation and 6 Sigma? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
B Relationship Pictures Coffee Break and Water Cooler Discussions 10
J Relationship between Quality, Reliability, Price and Delivery Misc. Quality Assurance and Business Systems Related Topics 7
D AIAG FMEA 4? Ed. Explanation: Relationship between PFMEA and Special Characteristics FMEA and Control Plans 8
shimonv Operator vs. Manufacturer Relationship and ISO 13485 / CE Requirements ISO 13485:2016 - Medical Device Quality Management Systems 5
S Relationship between Normal Distribution and AQL AQL - Acceptable Quality Level 13
A C=0 and Skip Lot Sampling Plan Relationship Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
D Relationship between IEC 60601-1 3rd Ed and IEC 60601-2-10 IEC 60601 - Medical Electrical Equipment Safety Standards Series 8
S OSHA and UL 60601-1 Relationship Other Medical Device Related Standards 3
S The relationship (correlation) of 5 Core Tools with TS 16949 IATF 16949 - Automotive Quality Systems Standard 9
A How to improve customer-supplier relationship? Supplier Quality Assurance and other Supplier Issues 13
S The relationship between IEC 60601-2-18 and IEC 60601-2-37 - Ultrasound Project IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
A Document Relationship Matrix - Keeping Track of References to Related Documents ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
P Relationship between Crimping ID & Crimping Depth - Minitab usage Statistical Analysis Tools, Techniques and SPC 3
D Inter-Relationship of 3 AS9102 Forms AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
K CRM (Customer Relationship Management) integrated with QMS. Manufacturing and Related Processes 2
kedarg6500 Relationship between Cp and Cpk Capability, Accuracy and Stability - Processes, Machines, etc. 4
L Arima Output - Relationship between my raw data and the residuals generated Using Minitab Software 1
C Understanding the relationship of Pp, Ppk, Cp, Cpk Six Sigma 4
C The relationship between OEM and the subcontracted manufacturer 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
S The Relationship of Sample Size and Lot Size Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
A Cpk / AQL relationship (Cpk tending towards AQL 1.0%) AQL - Acceptable Quality Level 1
Ajit Basrur Relationship between Blend Uniformity and Content Uniformity Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
D Relationship between ISO 9001:2000 and EFQM ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
L What's the relationship between LVD (low voltage directive) and MDD EU Medical Device Regulations 3

Similar threads

Top Bottom