SBS - The best value in QMS software

Reliability & Maintainability (R&M) - Where can I find information?

Standard Work Instruction Software by Dozuki
Elsmar Forum Sponsor
G

Greg Maggard

#2
#2
Can anyone suggest any good links where i can find information in R&M?
Click to expand...
I have a forula for R&R (Repeatability & Reproducibility) Is this the same Idea? I could e-mail it to you if you wish.:bigwave: :smokin:
 
F

Frank Trott

#4
#4
Zanzi said:
Can anyone suggest any good links where i can find information in R&M?
Click to expand...
Zanzi,

I have always found the site run by Reliasoft to be a great place to find reliability information. I am a user not a salesman, but the reference information is very good and you can get free demonstration versions of their software. Obviously the information is there to get you to buy the software, but it is very comprehensive. You can find them at http://www.reliasoft.com

Frank
 
Marc

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#5
#5
:topic: I opened this Reliability forum by request, so hopefully we can get some good discussions going here in the future. It's definitely not been a focus in the past. I hope to change that!
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
M ERTMS/ETCS RAM (Reliability, Availability & Maintainability) Requirements Specs. Various Other Specifications, Standards, and related Requirements 2
F Life Cycle Cost worksheet - Reliability and Maintainability of systems Reliability Analysis - Predictions, Testing and Standards 1
A Manufacturing Process Design Output Data for Quality, Reliability, Maintainability Design and Development of Products and Processes 1
A Asked to assist in Reliability and Maintainability planning for a new product Reliability Analysis - Predictions, Testing and Standards 3
Marc IEC Standards - Reliability, Dependability, Maintainability, etc. Other ISO and International Standards and European Regulations 0
U Seeking: Reliability & Maintainability Engineer - Aerospace - Stratford CT Reliability Analysis - Predictions, Testing and Standards 0
S 8.2.3.1 Reliability, Maintainability and Availability - How to satisfy requirement? Reliability Analysis - Predictions, Testing and Standards 4
Q Ford's R&M (Reliability and Maintainability) Program - No MTTF or MTTR data Reliability Analysis - Predictions, Testing and Standards 2
Z Reliability and Maintainability Design Review Guidelines Design and Development of Products and Processes 0
T Reliability & Maintainability - No customers providing input into the R&M area Reliability Analysis - Predictions, Testing and Standards 3
Awais Forklift Reliability Analysis Manufacturing and Related Processes 6
M Reliability Testing - Weibull Analysis Help Reliability Analysis - Predictions, Testing and Standards 4
A Accelerated Reliability Demonstration Test Reliability Analysis - Predictions, Testing and Standards 4
L ISO 2859-2 LQL sampling plan linked to %confidence/%reliability Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
J 95% reliability for calibration frequency Calibration Frequency (Interval) 7
M How to Plan and Test the Reliability of Medical Devices Reliability Analysis - Predictions, Testing and Standards 1
L Reliability Block Diagrams (RBDs) helper for review. Reliability Analysis - Predictions, Testing and Standards 1
H Sample Size Calculation (Confidence Interval and Reliability) - Medical Devices Reliability Analysis - Predictions, Testing and Standards 6
K Taguchi Experiments for Factorial Design Analysis - Reliability of Minitab Results Using Minitab Software 1
J Calculating Reliability for Subsystems in Series Reliability Analysis - Predictions, Testing and Standards 15
N Reliability Testing of a Single-Use (Disposable) Medical Device Reliability Analysis - Predictions, Testing and Standards 4
R Regression for MTBF (Medical Device: Repairs vs Install Base) with Reliability Data Reliability Analysis - Predictions, Testing and Standards 16
A Demonstration Test Plan for Reliability of Big Equipment Reliability Analysis - Predictions, Testing and Standards 5
T Reliability calculation for repairable system Reliability Analysis - Predictions, Testing and Standards 14
T I want to calculate reliability at 750 hours Reliability Analysis - Predictions, Testing and Standards 8
G Metrology Laser Reliability General Measurement Device and Calibration Topics 2
S Reliability Software Recommendations Reliability Analysis - Predictions, Testing and Standards 4
D Cpk relation to Reliability Capability, Accuracy and Stability - Processes, Machines, etc. 4
R Formula to tie together - Confidence/Reliability Level AQL? LTPD? Reliability Analysis - Predictions, Testing and Standards 3
M Defining Reliability and Confidence Levels Reliability Analysis - Predictions, Testing and Standards 3
R Standard for Reliability/Performance Test on a Electro Mechanical Device IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
T "Time of Demonstration" requirement for Reliability Test Reliability Analysis - Predictions, Testing and Standards 1
C Reliability Testing Protocol on a new Peristaltic Pump Reliability Analysis - Predictions, Testing and Standards 14
T Reliability Lifetime Requirement Demonstration Test Reliability Analysis - Predictions, Testing and Standards 3
A Assessing a Preventive Maintenance Strategy - Reliability or Maintenance Statistics Reliability Analysis - Predictions, Testing and Standards 2
A Repairable System Reliability Analysis: Uptime/Downtime Hours, Failure Modes Data Reliability Analysis - Predictions, Testing and Standards 2
D Reliability of an Attribute Inspection based on Historical Data Capability, Accuracy and Stability - Processes, Machines, etc. 8
S Reliability Calculation - MTBF/MTTF for Static Mounts of Rail Industry Reliability Analysis - Predictions, Testing and Standards 2
R Minitab - Reliability / Survival Distribution Analysis Using Minitab Software 1
C CRE (Certified Reliability Engineer) Exam 03/02/2013 Professional Certifications and Degrees 11
D Demonstration Reliability Test Formula with allowance for 'x' Failures Reliability Analysis - Predictions, Testing and Standards 6
R Military Land Vehicle Reliability with Only 1 vehicle & Only 1 Endurance Test Reliability Analysis - Predictions, Testing and Standards 5
J Reliability Prove-out, Pass-Fail Testing Reliability Analysis - Predictions, Testing and Standards 2
J Relationship between Quality, Reliability, Price and Delivery Misc. Quality Assurance and Business Systems Related Topics 7
L Determining Cpk based on a given Sample Size, Confidence Level, & Reliability Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
7 Is testing 99.7% reliable? Reliability Question Reliability Analysis - Predictions, Testing and Standards 3
J Reliability Centered Maintenance - Nowlan & Heap's AD-A066579 (1978) Reliability Analysis - Predictions, Testing and Standards 1
E Question on the Reliability of the Faroarm vs. Romer Arm Calibration and Metrology Software and Hardware 10
O Can anyone recommend appropriate standard for Reliability Testing of Cables Other Medical Device Related Standards 3
D Reliability Growth methodology (Duane, CrowAMSAA) - Test Planning Reliability Analysis - Predictions, Testing and Standards 5

Similar threads

Top Bottom