Reputable Third Party Inspection (Metrology Lab) In USA? Cam Profile Measurement

jerry_Malaysia

Quite Involved in Discussions
Hi guys

Hope i am in the correct place to ask this question.
Any suggestion on a reputable third party inspection lab (metrology lab) in USA?
I need to use third party to confirm a cam profile measurement by using CMM scanning.
Any help will be appreciated.
thank you
 
Last edited:

Brizilla

Quite Involved in Discussions
Re: Any Reputable Third Party Inspection (Metrology Lab) In USA??

I've used this place.

Made to Measure
545 E. Algonquin Rd. Suite M
Arlington Heights, IL 60005

Phone: 847-718-1680 | Fax: 847-718-1687

They did good work. Parts were too big for us to measure accurately so we sent them over there.
 

jerry_Malaysia

Quite Involved in Discussions
Re: Any Reputable Third Party Inspection (Metrology Lab) In USA??

Thanks Brizilla
May I know whether they have a CMM which able to perform scanning function? My parts has to be measured by scanning CMM. Any idea?
Thanks in advance.
 
J

JAltmann

Your going to be hard pressed to find a 3rd party with a cam measurement machine. A scanning CMM won't do as good a job as a machine made for this work.

I assume your looking for the lift, duration geometry, etc?

You could try Adcole or one of the manufacturers.
 
S

Steven Deans

I am the Metrology Specialist with 3PEC in Bessemer Al (205) 481-0080 and we do 3D scans to CAD, first artical inspections, Launch supports, and fixture certifications if we can help out. We do work for KIA, Mercedes, Hyundai, Honda and their Teir Suppliers and multiple Aerospace companies in the US. We also will travel to you with our equipment to certify your parts eleminating shipping costs and down time. If you have any questions feel free to give me a call.

Steven Deans
(Phone number is in my Profile)
 
Top Bottom